Yarisworld Archive

What is the Most Quiet aftermarket performance muffler

19 posts · 16,782 views

thomasward00Original postNew Orleans, La · Apr 28, 2007#1
I have the Sedan and i'm looking for a nice muffler, because the stock muffler looks like crap, but I don't want it to sound like a rice fartcan, are there any high flow mufflers that are fairly quiet?

Thanks in advance....

Replies 18

ecoAtlanta · Apr 28, 2007#2
Any muffler that has a big outlet with no silencer,coming off a 1.25" exhaust pipe(I think thats what OEM was)is going to sound like a fart can.But you should hear mine,no farting,just a deep note.
eTiMaGoBangkok, Thailand · Apr 28, 2007#3
I would think the TRD muffler would be quietest, I also hear the Fujitsubo one is not too noisy too.
thomasward00Thread starterNew Orleans, La · Apr 28, 2007#4
Then which one is the best value price wise?

I don't want to pay 400 bucks for a muffler, I remember paying 99 bucks each for my flowmasters, when I had my LX 5.0.
eTiMaGoBangkok, Thailand · Apr 28, 2007#5
Well sure, a custom exhaust can cost you quite a bit less, but the results are unknown until you try it 😉
thomasward00Thread starterNew Orleans, La · Apr 28, 2007#6
Well I had my flows hooked up to my Bassani X pipe on my stang, but that was just a different class of car, I'm not looking to race my yaris, there is no point in it. It is an economy car, I guess I'll just find a nice exhaust tip, but I want it to come straight out, not pointing down. Do you guys have links to mufflers for the Yaris?


Thanks
eTiMaGoBangkok, Thailand · Apr 28, 2007#7
Plenty of mufflers available from the various site sponsors, if you're after just the tips I've got some official Toyota ones in my GB thread.
Chris07LBNew Jersey · Apr 28, 2007#9
The Wagonlios, or however its spelled, supposed to be the most quiet one out there.
weaponrcamryPA--->MD<---WV · Apr 28, 2007#10
Yea I really don't think their are too many quiet type mufflers. You can find one and add a silencer to it. That is the only thing I can think of that will make it quiet.
sdmfchicago · Apr 29, 2007#11
is the medallion touring kinda quiet? i was considering the concept g but i think it may be kinda noisy, the fujitsubo is too expensive.
PetersRedYarisThe Black Hills of South Dakota · Apr 30, 2007#12
I can tell you the ZPI axle back is NOT quiet. Go TRD or Tanabe Medalian touring.
sdmfchicago · Apr 30, 2007#13
i heard trd's are kinda short and they sit real close to the rear bumper. can anyone confirm this. i would like to get everything done before the next show.
SpadesOregon,USA · Apr 30, 2007#14
I know everyone likes "exhaust in a box", but custom exhaust is the way to go. custom cat back piping with a high flow chambered muffler. no bigger than 2" inlet and outlet, custom bent exhaust from the cat back. I went with dynomax. slightly louder than stock, but since it is a chambered muffler it is still quiet. not all chambered mufflers are quiet, some, like flowmaster, are a bit loud.

I spent 50 bucks on a DynoMax Superturbo muffler at the local exhaust shop and under 150 bucks for cat back 2" piping. quiet, flows good, has a nice tone.

problem solved.
Chris07LBNew Jersey · Apr 30, 2007#15
I agree ^^
Doug007California · Apr 30, 2007#16
I have the same as Spades (thanks for the consult), although I intended to have the 14" Flowmaster installed. Both that and the Magnaflow were too loud. The Turbo & 2" stainless steel tip set me back $90 and sounds great.
carloshPanama · Jul 25, 2007#17
Originally Posted by Spades ↑
I know everyone likes "exhaust in a box", but custom exhaust is the way to go. custom cat back piping with a high flow chambered muffler. no bigger than 2" inlet and outlet, custom bent exhaust from the cat back. I went with dynomax. slightly louder than stock, but since it is a chambered muffler it is still quiet. not all chambered mufflers are quiet, some, like flowmaster, are a bit loud.

I spent 50 bucks on a DynoMax Superturbo muffler at the local exhaust shop and under 150 bucks for cat back 2" piping. quiet, flows good, has a nice tone.

problem solved.
Hi, your Dynomax super turbo inlet/outlet is about 2 inches what model? I thinking buy a dynomax (part # 17741 or 17742) round 2.25 inlet/outlet. What is your recommendation? I go to use the same stock pipeline with this muffler.

regards...
RShatchbackNY · Jul 25, 2007#18
If your trying to save money and dont wont something loud - why dont you find a tasteful exhaust tip?