Yarisworld Archive

Another Turbo Yaris Coming Soon!

81 posts · 17,261 views · page 2 of 2

Replies continued

spkrmanThread starter2 · May 10, 2007#51
Originally Posted by 03Z33 ↑
Congrats on the quick install, vid looks like fun!

Be sure to update us on your day to day impressions after you've had some more time with the car. Did they happen to dyno the car?

no dyno, but my butt dyno says there is approx omg.7 hp @ the wheels.

Crappy oil that was put in for breakin comes out today or tomorrow and K&N filter + mobil 1 goes in.

On that note, its taking some time to relearn how to drive so I'm not goin full boost @ every stop light. Chicago folks have a tendancy to drive kinda fast all the time, and keeping up used to mean revving to 3500+ from a stoplight... 3500 or so now means healthy boost and a nice BOV when i let off the gas to slow back down (not that i'm complaing about hearing that wonderful sound)... Definitely gonna take some getting used to.
Doc ZaiusOttawa, ON, Canada · May 10, 2007#52
Looks awesome... video looks awesome!! You must be very happy! Can't wait to win the lottery so I can build mine! 😁


Originally Posted by spkrman ↑
The speedometer is either way low in the yaris, or its way high in the 3000gt, I'd say a combo of both. When cruisin along, my 40 was his 45 😲
Probably b/c of your big wheels... since they have a larger overall diameter, they're turning slower to maintain the same speed, so your speedometer will register a lower speed than actual. 👍
spkrmanThread starter2 · May 10, 2007#53
Originally Posted by Doc Zaius ↑
Looks awesome... video looks awesome!! You must be very happy! Can't wait to win the lottery so I can build mine! 😁




Probably b/c of your big wheels... since they have a larger overall diameter, they're turning slower to maintain the same speed, so your speedometer will register a lower speed than actual. 👍
Which also means the car is shifting at a much higher speed, i could def feel the difference when I first put em on. It was/is kewl though, just takes a little more gas to get goin, I generally dont drive "hard" anyway.
dngzvancouver · May 10, 2007#54
waiting for 0-60 vid!!!
ZPIracingLouisville, KY · May 10, 2007#55
Glad you made it made it home safe....I went in the office came out and you had already taken off..
jamal1984Georgia, USA · May 10, 2007#56
how about MPG?
spkrmanThread starter2 · May 10, 2007#57
Originally Posted by ZPIracing ↑
Glad you made it made it home safe....I went in the office came out and you had already taken off..

Ah, sorry about that, I just assumed you were tied up. I was definitely ready to get movin.
RanggarnGold Coast, QLD, Australia · May 10, 2007#59
...
...
...
AWESOME






Now have ZPI come over to the gold coast so I can get one of their kits!!!
= P
punchBarrie, ontario · May 11, 2007#60
nice speakerman, 2 things, engine light? and not so much a bolt on when welding is required....
turboyarisSouthern New Jersey · May 11, 2007#61
the need for the welding was because of the difference in body styles between the liftback and sedan I am sure. So for the remaining customers I would bet it is a bolt on process, seeing as they have now fitted it to a sedan and a liftback. 👍 so you're all good
sdmfchicago · May 11, 2007#62
yea why is the cel on? and whats the code
turboyarisSouthern New Jersey · May 11, 2007#63
well for one the front oxygen sensor has been removed as kenny has said (i believe in the other post) another could possibly be for the larger injectors.
VanderkittenBerkeley, CA · May 11, 2007#64
Ok, so is this an Auto transmission yaris? The Launch from the vid was pretty mild. 0-60 time looked about 8 second, but at 182 FWHP in a 2200 lbs car it should be sub-6 with a manual. BOV sounds great and the exhaust note is TUNERIFFIC! Now, about the first 25 seconds of fumbling and lense cleaning ;)

I can't wait to get mine!!
sdmfchicago · May 11, 2007#65
still not sold on the idea of turbo, especially with stock internals, w8n for better internal parts to come out if not 3.5k can get me a jdm 2zz w/tranny
spkrmanThread starter2 · May 11, 2007#66
Originally Posted by sdmf ↑
still not sold on the idea of turbo, especially with stock internals, w8n for better internal parts to come out if not 3.5k can get me a jdm 2zz w/tranny
the internals are already out? :)
VanderkittenBerkeley, CA · May 11, 2007#67
Honestly, 190HP is not a big deal for the internals on these motors. I can imagine that if you went hi-comp on the pistons you might want to look into better connecting rods, like you would with any motor, or just have the stockers balanced at least. VW's get 240+ out of a 1.8T all day long with a stock K03 turbo, chip, intake and exhaust with stock parts. Those motors are 10:1 compression as well, so it's fairly hi-comp for a turbo motor!

Beyond a good ZPI clutch and limited slip diff and bigger brakes, you're probably set. If you wanted to pump a 30psi Turbo, Nos and hi-comp pistons you might want to look for some new internals... or a different car. =)
Doc ZaiusOttawa, ON, Canada · May 11, 2007#68
Guy... the Yaris has a 10.5:1 compression ratio. Stock. And the rods a built like toothpicks.

I'm not sure you can compare a factory-turboed engine made for a performance(ish) car with an engine built to be light and for fuel economy. Apples and oranges.
spkrmanThread starter2 · May 12, 2007#69
Originally Posted by Vanderkitten ↑
Ok, so is this an Auto transmission yaris? The Launch from the vid was pretty mild. 0-60 time looked about 8 second, but at 182 FWHP in a 2200 lbs car it should be sub-6 with a manual. BOV sounds great and the exhaust note is TUNERIFFIC! Now, about the first 25 seconds of fumbling and lense cleaning ;)

I can't wait to get mine!!
Yea, auto car with no torque is no good. From 30 to 90 is much more impressive than 0-60.

The biggest thing with the launch, though, is getting 105lbs of wheel spinning... lighter wheels I would imagine would help a ton there.
spkrmanThread starter2 · May 12, 2007#70
Originally Posted by Doc Zaius ↑
Guy... the Yaris has a 10.5:1 compression ratio. Stock. And the rods a built like toothpicks.

I'm not sure you can compare a factory-turboed engine made for a performance(ish) car with an engine built to be light and for fuel economy. Apples and oranges.
I think the thing to remember here is ZPI didn't reinvent the wheel for the yaris... this has already been reliably done on XB's, both auto and manual.

I'm sure it shortens the life of the motor, but we are talkin a motor that would run until eternity :)
Black YarisToledo, OH · May 12, 2007#71
Pimpin....

Baggs are next....
spkrmanThread starter2 · May 12, 2007#72
Originally Posted by Vanderkitten ↑
Ok, so is this an Auto transmission yaris? The Launch from the vid was pretty mild. 0-60 time looked about 8 second, but at 182 FWHP in a 2200 lbs car it should be sub-6 with a manual. BOV sounds great and the exhaust note is TUNERIFFIC! Now, about the first 25 seconds of fumbling and lense cleaning ;)

I can't wait to get mine!!
lol i edited it... and upped the wrong vid. fixed now.
BARRYNORCAL · May 13, 2007#73
what turbo manifold did you use? one for a xB or xA?
turboyarisSouthern New Jersey · May 13, 2007#74
its a turbo manifold for a yaris
ZPIracingLouisville, KY · May 14, 2007#75
I think all the questions have been answered. The turbo manifold is proprietary to this kit. We actually place the wastegate behind the turbo to keep the heat away from the ECU. The CEL is due to the removal of the primary O2 sensor. We do this to prevent the ECU from having adaptive control.

The kit is safe we are not making the slow car a race car only a slow car not so slow anymore…. You can run 7psi and just about anything. If you are not sold on the idea and you think it will fail but still want boost add the low compression pistons and get rolling…..

We will not put our name on something that is not engineered to perfection and safe for the end user to use.
GalavoxxSan Francisco · May 14, 2007#76
Originally Posted by ZPIracing ↑
I think all the questions have been answered. The turbo manifold is proprietary to this kit. We actually place the wastegate behind the turbo to keep the heat away from the ECU. The CEL is due to the removal of the primary O2 sensor. We do this to prevent the ECU from having adaptive control.

The kit is safe we are not making the slow car a race car only a slow car not so slow anymore…. You can run 7psi and just about anything. If you are not sold on the idea and you think it will fail but still want boost add the low compression pistons and get rolling…..

We will not put our name on something that is not engineered to perfection and safe for the end user to use.
well said. 👍
nebulightPA · May 14, 2007#77
Originally Posted by Vanderkitten ↑
Honestly, 190HP is not a big deal for the internals on these motors. I can imagine that if you went hi-comp on the pistons you might want to look into better connecting rods, like you would with any motor, or just have the stockers balanced at least. VW's get 240+ out of a 1.8T all day long with a stock K03 turbo, chip, intake and exhaust with stock parts. Those motors are 10:1 compression as well, so it's fairly hi-comp for a turbo motor!

Beyond a good ZPI clutch and limited slip diff and bigger brakes, you're probably set. If you wanted to pump a 30psi Turbo, Nos and hi-comp pistons you might want to look for some new internals... or a different car. =)
Don't be so sure, like Doc said, these cars were built for different things. There is no need to over engineer a rod on a car that is made for gas milage. But when you have a turbo charged motor that has to see boost for the majority of driving, you'll make a little bit more beefy rod. I had a 1.8T and it made 370whp with a 50 trim t3/t4 on a bone stock motor. Also, the 1.8T is 9.5:1 on some motors and 9:1 on others.
nebulightPA · May 14, 2007#78
Originally Posted by ZPIracing ↑
I think all the questions have been answered. The turbo manifold is proprietary to this kit. We actually place the wastegate behind the turbo to keep the heat away from the ECU. The CEL is due to the removal of the primary O2 sensor. We do this to prevent the ECU from having adaptive control.

The kit is safe we are not making the slow car a race car only a slow car not so slow anymore…. You can run 7psi and just about anything. If you are not sold on the idea and you think it will fail but still want boost add the low compression pistons and get rolling…..

We will not put our name on something that is not engineered to perfection and safe for the end user to use.
I don't think it's a good idea to ship a product that will ALWAYS have a check engine light. Emissions and inspection are common in most states. You can get a better tune on the stock ECU rather than using e-manage 🤮 and have to deal with all the garbage that goes along with it.
Sway84Toronto Ontario Canada · Aug 22, 2007#79
videos of the turbo please?
RShatchbackNY · Aug 22, 2007#80
Originally Posted by Sway84 ↑
videos of the turbo please?
I doubt they will answer you with videos of the turbo...

If you use the search button on here - or on youtube, you will find the video of the yaris sedan with their turbo kit. However the company is not around anymore for numerous shady reasons (which you can also find by using the search button). Either way - I wouldnt bother looking for a turbo kit from them anytime soon.
Black YarisToledo, OH · Aug 22, 2007#81
ZPI is long gone... Spkrman is banned