Yarisworld Archive

$30 Oil Catch Can, DIY

80 posts · 92,133 views · page 2 of 2

Replies continued

marcustoronto, canada · May 11, 2009#51
if the filter tubing is smaller than stock would than restrict air coming out of the engine..

also what will happen if you forget to clean the filter and it gets filled would that block the air to comeout of the engine..and would that damage the engine for not getting that excess air out.??
marcustoronto, canada · May 11, 2009#52
does this work..lolz
catch can.jpg
mikenacaratoBrentwood, TN · May 11, 2009#53
no, you CANNOT have a breather on there. it will cause a vacuum leak and the car will run rough. i had this issue when i tried to do it.
marcustoronto, canada · May 12, 2009#54
how much does the husky collect based on km or mile run ? what if u forget to clear it and it gets full??
d1nzfeasia · May 12, 2009#55
i tried,it will NEVER get full. NEVER...
a teaspoon and that is it!
MGarganoNJ · May 16, 2009#56
I'm looking to do this mod but I'm wondering if anyone knows the correct hose diameter for the tubing on the 09. I think it's 3/8" but not positive and I want to be sure before I buy the filter.
marcustoronto, canada · May 16, 2009#57
i read that this air filter will drop pressure by 5 psi would that effect the engine performance? ANYONE!!!!!!!!!!!!!
1stToyotaOklahoma · May 16, 2009#58
Always heard that this was a popular and necessary mod when forced induction is added or boost is increased above stock levels. I'll just stick with injector cleaner once every 5k miles and 3m throttle plate cleaner, should the need ever arise.
marcustoronto, canada · Jun 11, 2009#59
well ...would a 5psi drop affects the engine performance when using the oil catch can. im ready to do this..
yarisugiハワイ · Jul 6, 2009#60
Thank you Ogredude. I was able to complete this using your DIY.
Looks a little different, but same thing. Cost me about $25 :)

Picture lost · i279.photobucket.com
marcustoronto, canada · Jul 6, 2009#61
Originally Posted by yarisugi ↑
Thank you Ogredude. I was able to complete this using your DIY.
Looks a little different, but same thing. Cost me about $25 :)

Picture lost · i279.photobucket.com
NICELY DONE..what size tube did you use..
yarisugiハワイ · Jul 6, 2009#62
I don't remember but the inside diameter was fitted for 3/8". It was from a left over hose.
GMKingPortsmouth VA · Aug 31, 2009#63
After reading this whole thread I'm still left confused.

from factory ALL manufacturers have a very tiny amount of oil fed to the intake system.

and you guys are trying to collect it before it gets there?

I understand the idea of preventing extra oil from burning in your combustion process, and keeping this extra oil off of your valves, particularly if it's about time to change your oil and it's got an amount of junk in it that you'd prefer not to get into your intake or on your valves.

but has anyone honestly considered WHY the manufacturer's ALL do this? they want your engine to be reliable (nearly) as much as you do, as well as FE. They must have some reason for creating this line and doing this. The only reasons I can think of is the air intake is metal right? metal corrodes. Corrosion prevents airflow, and airflow over corrosion passes right into your engine. now your engine is steadily eating rust (or oxidation, which the engine would eat to a much lessor degree).

also I can imagine that this oil many of you are deciding to prevent from going into your engine is lubricating your valve and valve seats, so that they create a decent seal when closed and last longer then bare metal hitting metal. It's very possible I'm wrong, and I'd love to believe that this awesomely cheap mod is good for my engine and it's longevity, however I cannot do so without having the above statements properly debunked.
Judas IscariotMount Royal, NJ · Nov 22, 2010#64
Originally Posted by GMKing ↑
I'd love to believe that this awesomely cheap mod is good for my engine and it's longevity, however I cannot do so without having the above statements properly debunked.
+1


bumpity
Midnight DrifterMonroe, NJ · Nov 23, 2010#65
On my Supra, I just vented the PCV to atmosphere. What's the point in spending money on a catch can?🤷
anexrx7U.S. · Nov 23, 2010#66
Originally Posted by Midnight Drifter ↑
On my Supra, I just vented the PCV to atmosphere. What's the point in spending money on a catch can?🤷
You let your Supra get all grimy from blow by? After an hour of running the RX7, that crap is everywhere when I have a leak on the vent hose.
Midnight DrifterMonroe, NJ · Nov 23, 2010#67
Originally Posted by anexrx7 ↑
You let your Supra get all grimy from blow by? After an hour of running the RX7, that crap is everywhere when I have a leak on the vent hose.
Well I had a metal braided hose running from the vents down to the oil drain plug, I never had problems with leaks. I thought it looked kinda cool like that.

Friend of mine did the same thing with his Corolla SR5, still working great on his car.
ilikericesavannah, ga · Nov 23, 2010#68
^^^i admit... on my budget crx and first time doing a piece by piece turbo setup i ran a hose off my valve cover running under the car.. ran great for two years.. til i got into autocross and turbo+street tires=zero grip.. took it off and sold it. im sorry mother nature.. i was a dumbass..

i remember the first time i ran my crx full boost without a hose on the valve cover just to test drive it.. when i hit about 6k rpm oil shot under my hood and all over passenger side windshield.. my ass was so tight when that happend..
goliath1812Ocala Florida · May 6, 2011#70
Sorry for the resurrection of an old thread, but has anyone ever thrown any codes with a catch can? I just did this, I used the Husky filter from Home Depot, and just got a P0171 code. The only difference is I used another short section of hose from the PCV valve to the Husky filter, instead of cutting the stock hose. Could that be the problem? I'm sure all of the fitting are tight, and there are no leaks....
Sorry about the pic quality, it's taken from my phone.
catch can.JPGcatch can pcv.JPG
mario98cPuerto Rico · May 6, 2011#71
P0171 System Too Lean (Bank #1)
JTDBT903NE. OHIO · May 7, 2011#72
I would say that the hose is collapsing under hard throttle, setting off the code. Check the hose under part/full throttle to verify this.

I have a Mazda MPV van that has a notorious problem with a inferior pcv hose connection and throws a similar code!
ecc_33OHIO · May 10, 2011#73
i just did this tonight. i gutted the air filter out of the top of the husky air compressor catch can and siloconed the butterfly valve on the bottom of the resivor becuase it leaked. Looks good and should work great. I just ditched the engine cover. Don't really need it anyways. Looking down into the intake seemed like it was pretty oily.
goliath1812Ocala Florida · May 12, 2011#74
Well, the short section of blue tubing i have must be the problem. I never did check it for collapsing under throttle, but I reset the code with my scanner, and it came back on that same day. I took everything off, and haven't got a code since. In the brief amount of time that I had the catch can on, I did catch some oil, so it definately works. I just need to cut the stock hose I guess and mount the filter inline.
Bluevitz-rsOshawa, Ontario, Canada · May 12, 2011#75
^ are you sure you had the filter in the right direction?
Klink10910 · May 12, 2011#76
^ that was my thought also.
goliath1812Ocala Florida · May 12, 2011#77
yes, i'm sure. and the blue hose was actually one that came with a different eBay catch can. when i had that installed, it threw the same code. i had taken it off and put it away for a while until i saw this thread and tried the husky.
Jason@SportsCarDebary, FL · May 12, 2011#78
I am surprised so many people report finding oil in there... Are these high mileage or FI engines?

We just put a K&N breather on the end of the stock hose, zip-tied it up near the cowl, still perfectly clean.
ecc_33OHIO · May 13, 2011#79
after about 100 miles I have very little oil but do have a little bit in it. My car has 57,500 miles. I have been driving really easy too. I guess the harder you drive it the more its going to spew.
goliath1812Ocala Florida · May 13, 2011#80
I had put about 300 miles on it before I removed it. It had some oil, but very little. Not nearly enough to have to drain it. I have about 80K miles on the car.