Yarisworld Archive

Best Grease to use on the belt?

12 posts · 8,421 views

hasher22Original postAustralia Sydney · Apr 22, 2007#1
Ok well after tryin so many times trying to get the 14mm bolt off the pulley, the belt is now makin a very loud squeakin noise.

The loud screeching sound is from the belt. The noise only screeches when i start the car, and the noise only goes for about 1 - 4 seconds then it goes away. And this scares the fook outa me....

What is the best grease / oil / lube to use on the belt to prevent it from makin that awful screeching noise when i turn on the engine.

Replies 11

brickhardmeatInner City, Dallas · Apr 22, 2007#2
so is this a tension issue or do you need the lubrication? I know there are sprays out there but don't know what is best. I guess I am kinding of raising another question rather than answering yours.
acrbillchicago · Apr 22, 2007#3
Don't grease anything man! The reason its squealing is because its slipping a bit.
There is a spray you can use, it sets up tacky to help keep the belt from slipping. But your best bet is to just buy a new belt and make sure you have proper tension on itt.
punchBarrie, ontario · Apr 22, 2007#4
Originally Posted by hasher22 ↑
Ok well after tryin so many times trying to get the 14mm bolt off the pulley, the belt is now makin a very loud squeakin noise.

The loud screeching sound is from the belt. The noise only screeches when i start the car, and the noise only goes for about 1 - 4 seconds then it goes away. And this scares the fook outa me....

What is the best grease / oil / lube to use on the belt to prevent it from makin that awful screeching noise when i turn on the engine.
1122 usefull posts, and now you want to grease a belt????

what does grease do? make things slippy, yeah it won't squeal, it won't do anything, the pulleys will spin, and the belt won't go ahead try it...
YamilRSan Diego, CA · Apr 22, 2007#5
Originally Posted by hasher22 ↑
Ok well after tryin so many times trying to get the 14mm bolt off the pulley, the belt is now makin a very loud squeakin noise.

The loud screeching sound is from the belt. The noise only screeches when i start the car, and the noise only goes for about 1 - 4 seconds then it goes away. And this scares the fook outa me....

What is the best grease / oil / lube to use on the belt to prevent it from makin that awful screeching noise when i turn on the engine.

A little adjustment is all you need
07typeSSouthern California · Apr 22, 2007#6
yea that 14mm is a pain in the ass. What I found did the trick was put on a pair of gloves, grab a 14mm closed end wrench and just pull up. It works better if you make multiple hard pulls cause you will have a better chance to break it free.
PetersRedYarisThe Black Hills of South Dakota · Apr 22, 2007#7
Increase the tension if it's slipping but DO NOT grease the belt. If increasing the tension (don't over tension it) doesn't work, get some belt dressing. That stuff will increase the tackiness of the belt and eliminate the slipping. Overall, a new car with a new belt, proper tension is prabablty your only problem.
hasher22Thread starterAustralia Sydney · Apr 22, 2007#8
Thanks guys, the tension was put back to its normal state when i was tryin to get the pulley off.....after that the damn screechin occured. I guess i have to buy that Belt Dressing.....i sure hope that will work.
PetersRedYarisThe Black Hills of South Dakota · Apr 22, 2007#9
Use it sparingly, a little bit goes a long way.
d4w1Fort Worth · Apr 22, 2007#10
Replace that worn belt.
whoguySydney, Australia · Apr 22, 2007#11
DO NOT GREASE THE BELT!!!!

Replace as per d4w1 and tighten to spec.
hasher22Thread starterAustralia Sydney · Apr 23, 2007#12
its not worn out, it doesnt need a replacement..........and i get it when you guys said "do not grease it"......as i said in my 1st post

"What is the best grease / oil / lube" to use, as i didnt know what kind of product to eliminate the screeching

Edit : The belt dressing worked like a charm......thanks petersredyaris! :)