Yarisworld Archive

ChinoTake - Chinos Intake

291 posts · 93,641 views · page 3 of 6

Replies continued

ChinoCharlesOH · Apr 30, 2007#101
Been a long time since I updated, so here it is...

I ran into a problem that is going to prolong this process even longer than it already has been. Sucks, I know, but some things aren't in my control. Basically, we had some issues with our first machinist and decided to part ways with him and start looking for an alternative. We found another machinist and he has agreed to help on the project, but unfortunately the process had to begin all over again with the plates, so we are waiting on that. Other than that, everything is in my posession... couplers, clamps, piping, expander, and Chris is holding onto the test filter, so as soon as I get a perfect MAF adapter we start testing.

Short of our MAF problems, the design of the rest of the piece has vastly exceeded my expectations. This intake is built like the proverbial brick shithouse. Your Yaris will rust and fall away long before this intake is done kicking. We're using high quality 3 ply couplers, t-bolt clamps for the throttle body, and stainless piping. None of the worm gear clamp, tinny polished aluminum and single ply couplers you'll find on Ebay. In short, I'm extremely excited to get this on the market. I think some jaws are going to drop.

I'll update once we begin the testing phase. Don't ask for a deadline because I'm obviously not all that great at meeting them. Just rest assured that its close and its awesome. Oh, and don't bother giving me hell for not having this done. I've busted my ass and its been frustrating to run into so many problems, but there is only so much I can do. If you're that annoyed at waiting, by all means... buy something else. Your loss. 😉

Charles
vodkalushRochester, NY · Apr 30, 2007#102
WTF man, it should have been finished months ago!!!


gahhhhh damn you scuba steve!!



👍
AlphaFoxThread starterSpringfield, Mass · Apr 30, 2007#103
So once you get the plates are you welding them to the piping? You doing the welding yourself?
Hope they come in soon, did he give you a prototype maf yet?
AstromanWenatchee, WA · Apr 30, 2007#104
I don't mind waiting, I know it will be worth it! 😁
Ran KizamaCanton, GA · Apr 30, 2007#105
Still not done? I can't believe this. You're disappointing me Charles. Seriously, if there was a smilie I could use to display my frustration and disappointment with you, I...oh wait...found one.









































Picture not included in this copy
Chris07LBNew Jersey · Apr 30, 2007#106
kick ass sig Ran
YogiYarisTampa · May 1, 2007#107
Hey, I was wondering... I was thinking of buying the TRD intake but I am want to buy the most affective intake system available. Is the CC intake suppose to be really powerful or is everyone mostly stoked because its coming from a member of YW? I understand that it will look excellent but it is a short ram right? Which will give more power?
spkrman2 · May 1, 2007#108
Originally Posted by YogiYaris ↑
Hey, I was wondering... I was thinking of buying the TRD intake but I am want to buy the most affective intake system available. Is the CC intake suppose to be really powerful or is everyone mostly stoked because its coming from a member of YW? I understand that it will look excellent but it is a short ram right? Which will give more power?
I'm goin on a limb here.. but it'll be as effective as any other short ram.

People are hyped because someone on these boards is making it, yea... and the projected price and build quality will make it a no brainer.
Ran KizamaCanton, GA · May 1, 2007#109
Originally Posted by Chris07LB ↑
kick ass sig Ran
Sank yu berry much. 🙂
Chris07LBNew Jersey · May 1, 2007#110
make me one... purty plz.
Ran KizamaCanton, GA · May 1, 2007#111
PM'd sig pic to you.

/threadjack
PapamoonKansas · May 2, 2007#112
Somebody should design an awesome vinyl "ChinoTake" product sticker. That way we could boast our uber intake.
AstromanWenatchee, WA · May 2, 2007#113
Originally Posted by Papamoon ↑
Somebody should design an awesome vinyl "ChinoTake" product sticker. That way we could boast our uber intake.
I work as a graphic designer, could start making something. 😁
vodkalushRochester, NY · May 2, 2007#114
make away 👍
AlphaFoxThread starterSpringfield, Mass · May 2, 2007#115
ChinoTake name is patented by me.
but I give you permission to use it. *wink*
ChinoCharlesOH · May 2, 2007#116
HAH!

Ideally I want to get a vendors license, a tax ID and all that fun stuff and get a real company name and go to town. I have a couple other ideas in the back of my head as far as automobiles go, even when it comes to this car in particular. Problem is I don't have the startup capital, so hey, if you're a venture capitalist PM me. I would especially like to talk to someone who has started a business before and/or is familiar with writing plans and bookkeeping and whatnot. I'm good at conceptualizing and selling the product and building good business relationships. Its the other stuff I suck at.
AstromanWenatchee, WA · May 2, 2007#117
I will hopefully have a few designs up by the end of the week. ChinoCharles, what are some ideas & names have you thought up of? I can easily get some weatherproof labels made with a variety of stock including clear, matte silver, shiny silver, brushed silver, white & yellow. We have to outsource the labels to a specialty shop, but I can get them at cost. 500 would cost me about $125, half what we would charge our customers...
ChinoCharlesOH · May 2, 2007#118
I've been tossing ideas around. Something sleeper-ish, as we're purposefully making the intake totally unflashy. Any ideas? 😆
AstromanWenatchee, WA · May 2, 2007#119
Originally Posted by ChinoCharles ↑
HAH!

Ideally I want to get a vendors license, a tax ID and all that fun stuff and get a real company name and go to town. I have a couple other ideas in the back of my head as far as automobiles go, even when it comes to this car in particular. Problem is I don't have the startup capital, so hey, if you're a venture capitalist PM me. I would especially like to talk to someone who has started a business before and/or is familiar with writing plans and bookkeeping and whatnot. I'm good at conceptualizing and selling the product and building good business relationships. Its the other stuff I suck at.

It's pretty easy to get a tax ID and register your business name (at least in WA state.) I ran my own computer repair business and it cost $20 to register my business name and be legal to do business. I used quickbooks to handle my bookkeeping, and had the help of a bookkeeper setup my accounts. Do you personally know anyone who is a bookkeeper/accountant? They would be of great help.
ChinoCharlesOH · May 2, 2007#120
Originally Posted by Astroman ↑
It's pretty easy to get a tax ID and register your business name (at least in WA state.) I ran my own computer repair business and it cost $20 to register my business name and be legal to do business. I used quickbooks to handle my bookkeeping, and had the help of a bookkeeper setup my accounts. Do you personally know anyone who is a bookkeeper/accountant? They would be of great help.
So wait... you have to register with the state only? I thought you had to go through the IRS and the state?
AstromanWenatchee, WA · May 2, 2007#121
When you register with the state, you get a federal tax ID number (it's a nine digit number). You don't have to file anything separately to get tied in with the federal government. If your in city limits, you will also need to obtain a business license to conduct business inside city limits. I didn't do this the first time though, as I was running things out of a spare room in my apartment. If your going to even think of placing any signs up it would be a good idea to file the business in the city. I registered my biz in Yakima, but due to the fact I was a sole propriatorship and had no employees, they didn't make me pay a fee. Your situation might be different than mine though. Mine was a service business, yours would be a manufacturing/product business. Maybe one of those dummies books might help, lol. As for the business/product name, perhaps other members could provide their input? What about CSRI for Chino's short ram intake? I'm still playing around with label layout and fonts. The right font makes all the difference. 🤘
tk-421Dagobah · May 2, 2007#122
I'm thinking that you should drop the "o" to read :Chintake:
Rolls off the tongue a bit better IMO
AstromanWenatchee, WA · May 2, 2007#123
Chintake kinda sounds like something in a porn 😆
AstromanWenatchee, WA · May 2, 2007#124
Ok, I've decided to start a list of ideas for ChinoCharles' intake:

1. ChinoTake
2. ChinTake
3. UglyBetty SRI
4. übertake
5.
6.
7.
8.
9.
10.
AlphaFoxThread starterSpringfield, Mass · May 3, 2007#125
shoulndt we be coming up with a company name, rather than just an intake name?
AlphaFoxThread starterSpringfield, Mass · May 3, 2007#126
I just sold my old intake from my old car, now I just need to order yours chino!!
any progress reports? did the rtard machinest get the plates done?
NutzoidsPhiladelphia · May 3, 2007#127
Originally Posted by Astroman ↑
Ok, I've decided to start a list of ideas for ChinoCharles' intake:

1. ChinoTake
2. ChinTake
3. UglyBetty SRI
4. übertake
5. YRD Yaris Racing Development
6.
7.
8.
9.
10.
😈
Chris07LBNew Jersey · May 3, 2007#128
Short|Sucka
Chris07LBNew Jersey · May 3, 2007#129
Short|Sucka
AstromanWenatchee, WA · May 3, 2007#130
Originally Posted by AlphaFox ↑
shoulndt we be coming up with a company name, rather than just an intake name?
Probably, but also the intake name could even be the company name... Some good ideas so far, keep 'em coming!
AstromanWenatchee, WA · May 3, 2007#131
1. ChinoTake
2. ChinTake
3. UglyBetty SRI
4. übertake
5. YRD Yaris Racing Development
6. CRD Chino Racing Development
7. Short|Sucka
8.
9.
10.
CASTREXCosta Rica · May 3, 2007#132
hmm, IDY Intake ??

(is it done yet? intake) 😁
Doc ZaiusOttawa, ON, Canada · May 3, 2007#133
Originally Posted by Chris07LB ↑
Short|Sucka
waaaaahhahahahhaahh!!! 😁

I'm totally gonna get a "Powered by YarisWorld.com" sticker!!
AstromanWenatchee, WA · May 3, 2007#134
Picture not included in this copyPicture not included in this copy
just for fun 🙂
Ran KizamaCanton, GA · May 3, 2007#135
Originally Posted by Astroman ↑
Picture not included in this copyPicture not included in this copy
just for fun 🙂
...prease reave.

















😆 👍
ChinoCharlesOH · May 3, 2007#136
Originally Posted by CASTREX ↑
hmm, IDY Intake ??

(is it done yet? intake) 😁
😆 🙇
ecoAtlanta · May 3, 2007#137
Chino,If I was to shorten my pipe on the TRD,Ive been told it throws codes,by several members on here,but your o2 sensor is real close aswell,so why would mine throw codes and yours wont.
ChinoCharlesOH · May 3, 2007#138
The sensor is placed about twice as far from the throttle body as it is on mine. From what I hear this will not work. BlackYaris tried it to no avail.

By the way, the Chinotake Inside sticker is tits. Hilarious.
Black YarisToledo, OH · May 3, 2007#139
Originally Posted by ChinoCharles ↑
The sensor is placed about twice as far from the throttle body as it is on mine. From what I hear this will not work. BlackYaris tried it to no avail.
It was a NO GO.... it threw a check engine light almost as soon as I pulled out of my driveway
AlphaFoxThread starterSpringfield, Mass · May 4, 2007#140
Is chris getting the intake THIS weekend??
Chris07LBNew Jersey · May 4, 2007#141
How about you let ME tell you when I get it?!?
AlphaFoxThread starterSpringfield, Mass · May 4, 2007#142
Originally Posted by Chris07LB ↑
How about you let ME tell you when I get it?!?
ok... are YOU getting it? 😁
Chris07LBNew Jersey · May 4, 2007#143
Funny enough, I would rather you all bug the shit out of me for updates, and let chino the workin machino do his thing...
Chris07LBNew Jersey · May 4, 2007#144
........ oh and to answer your question...
AlphaFoxThread starterSpringfield, Mass · May 11, 2007#145
No offense to anyone, Chris or Charles, but I am getting discouraged waiting for this intake. It would be nice if there were weekly updates, but when someone asks the status is like we are slaping your mother or something. If there is going to be some hudge delay, then just say so. the worst thing is just not to say anything and have people expecting it soon.
Doc ZaiusOttawa, ON, Canada · May 11, 2007#146
Relax, guy. It'll be done when its done. I'm sure Charles is working on it as fast as he can, and considering its been end-of-term exams and such, I bet we can all cut him a little slack! 👍
Chris07LBNew Jersey · May 11, 2007#147
They all shipped out yesterday Alpha.. what, you never ordered your's yet?















🤣

I would suggest buying another one then if you really cant wait. Then when your kicking yourself for not waiting once the SS SRA comes out, you can flip it to another member on the cheap. 👍
ChinoCharlesOH · May 11, 2007#148
I told you there would be a "huge delay" when we had to switch machinists. Sucks, but there isn't anything I can do. I'm waiting with the rest of you.
AlphaFoxThread starterSpringfield, Mass · May 11, 2007#149
......
im thinking of just taking the airbox out and taping the filter to the top part of the airbox... I need the growl!!!
vodkalushRochester, NY · May 13, 2007#150
Originally Posted by AlphaFox ↑
......
im thinking of just taking the airbox out and taping the filter to the top part of the airbox... I need the growl!!!

😆 😆
ahhh haha, the cheapest "performance" mod yet!! do it!!

------------------------
DIY:
Cost: $0.50
Materials: Duct Tape
Description: Open airflow to engine, faster throttle response
Steps:
1. Take out filter box (pop top, use 10mm socket wrench to take out 2 bolts holding down air box)
2. Remove filter
3. Take top of filter box off (open all the way the slide top off air box)
4. Use Duct Tape and tape the air filter to the top of the air box (around edges)
5. Re-attach top of fiter box to the intake hose
6. VROOOM VROOOM
------------------------