7:34pmOriginal postBritish Columbia · Feb 21, 2014#1Installing the rear springs (Eibach pro-kit); is there a top and bottom?
At first I assumed the the tighter coiled area would be at the bottom, but that makes the Eibach logo upside down, which doesn't make sense for Eibach to do. Every pic I could find shows that the tighter coiled part sits at the bottom. Usually manufacturers place the logo right-side-up, which would put the tighter coiled area at the top. Now I'm confused but I don't think either way will make a difference...?
I've done a lot of suspension, however I'm not familiar with the Yaris.
Photo from Chris07LB
Picture not included in this copy
Picture not included in this copy
Replies 15
ExiwolfmanWasaga beach · Feb 21, 2014#2Logo the right side up ....I got sport line on mine its how I installed mine will have a look tomorrow ...I thought pro where black .
7:34pmThread starterBritish Columbia · Feb 21, 2014#3pro-kits are black, I just borrowed the photo
ExiwolfmanWasaga beach · Feb 21, 2014#47:34pmThread starterBritish Columbia · Feb 21, 2014#5"Logo right side up" Ok I can quickly fix that tomorrow.
ExiwolfmanWasaga beach · Feb 21, 2014#6Ya the second pic looks right ...tight on top
cali yarisCanoga Park, CA · Feb 21, 2014#7Logo right side up is the standard for springs, including ours. 👍
ezhacker1San Francisco · Feb 22, 2014#8Dont mix up the left and right. LOL JK
IllusionXBrossard, QC · Feb 22, 2014#9yeah.. i vote for logo always right side up..
7:34pmThread starterBritish Columbia · Feb 26, 2014#10Ok back to it. End links were corroded and had to wait on new ones to come in. Noticing the front bump stops supplied by Eibach are narrower in diameter and loosely fit the strut top hat.
I'm thinking I should just reuse the stock and cut an inch off. What says YarisWorld?
WeeYariGeorgetown, Ontario, Canada · Feb 26, 2014#11Pro-kits; I wouldn't bother with cutting the bump stops. Drop is not radical enough to really warrant it.
ExiwolfmanWasaga beach · Feb 26, 2014#12 Originally Posted by
7:34pm ↑ Ok back to it. End links were corroded and had to wait on new ones to come in. Noticing the front bump stops supplied by Eibach are narrower in diameter and loosely fit the strut top hat.
I'm thinking I should just reuse the stock and cut an inch off. What says YarisWorld?
i say use what came in the box ...but its only a 1 inch drop so stock should be fine too.
7:34pmThread starterBritish Columbia · Feb 26, 2014#13I tried to use what was in the box but the bumpstops didn't fit snug in the top hat, it was like a pencil down a hallway. I just took an inch off stock and used it.
ExiwolfmanWasaga beach · Feb 26, 2014#14 Originally Posted by
7:34pm ↑ I tried to use what was in the box but the bumpstops didn't fit snug in the top hat, it was like a pencil down a hallway. I just took an inch off stock and used it.
that will work too....now go and have fun driving it 👍
ExiwolfmanWasaga beach · Feb 26, 2014#15o and post pics when done
IllusionXBrossard, QC · Feb 27, 2014#16 Originally Posted by
7:34pm ↑ I tried to use what was in the box but the bumpstops didn't fit snug in the top hat, it was like a pencil down a hallway. I just took an inch off stock and used it.
When i took out my original ones, one of the side had slid down.. so i don't think it was really meant to stay up