Yarisworld Archive

16" rims

10 posts · 5,672 views

nerdyguyOriginal postcali · Feb 17, 2014#1
I have a 2008 yaris hatchback and I'm looking to get new rims in size 16. What is the best size and offset for 16's? I want it to look flush with the fenders, I do not plan on having any fender work done. Also, does anyone have pics of a 16x8 +25 on their yaris? Thanks.

Replies 9

G-AmmoThe Netherlands · Feb 17, 2014#2
16x8+25 should be ok!

I have 15x7 ET20 and the front is just underneath the fenders (with 185/40/15 tyres)

So the one you said should fit almost the same! (I used some spacers in the rear to let the rear pop out a bit :D)
1.5Tampa · Feb 18, 2014#3
this ^^^

16x8 +25 is a good size to be flush with the fenders. However I would recommend going with a wider wheel and a higher offset to allow a bigger tire stretch. 195 is about as thin as you want to go and if you stretch that on an 8" wheel its pretty chunky and could still rub. a 16x9 +35 or so would give you about the exact same effective sizing as 16x8 +25 but would give you more stretch to really clear the fenders since you wont be doing any fender work. 195 on a 9 is beyond a safe stretch lol I daily 205/40 on 10 with 0 issues
CTScottUSA, CT · Feb 18, 2014#4
I run 16x7 +45 European Toyota TTE Pitlane wheels on my 09 with 205/50/16 tires.

Picture not included in this copy
IllusionXBrossard, QC · Feb 18, 2014#5
Originally Posted by CTScott ↑
I run 16x7 +45 European Toyota TTE Pitlane wheels on my 09 with 205/50/16 tires.

Picture not included in this copy

I really should have had a moonroof done on my Yaris.
YaristeveLos Angeles · Feb 18, 2014#6
Originally Posted by CTScott ↑
I run 16x7 +45 European Toyota TTE Pitlane wheels on my 09 with 205/50/16 tires.

Picture not included in this copy
Nice. Is it lowered?
kimonaHuntington Bch, CA · Feb 18, 2014#7
I'm running 16 x 7, ET42 with 205/50/16 on my '07. I'm flush up front.
CTScottUSA, CT · Feb 18, 2014#8
Originally Posted by Yaristeve ↑
Nice. Is it lowered?
No. Stock suspension.
YaristeveLos Angeles · Feb 18, 2014#9
Originally Posted by CTScott ↑
No. Stock suspension.
Hmmmm... With a +45mm et, I suppose there should be no fender rubbing problems if lowered...

I assume no rubbing on the inside wells when turning?
CTScottUSA, CT · Feb 18, 2014#10
Originally Posted by Yaristeve ↑
Hmmmm... With a +45mm et, I suppose there should be no fender rubbing problems if lowered...

I assume no rubbing on the inside wells when turning?
No rubbing. Toyota specs them for 195 width tires, so lowered 205's might rub.