Yarisworld Archive

Options and opinions?

29 posts · 5,207 views

rcvminiOriginal postVancouver BC · Feb 5, 2014#1
Hey everyone so I have been going through the local CL and these are my current options.

They range from used to new, 15",16",17"

I am trying to figure out which way to go with these. I'm ok with used and they don't have to be the best looking as I am not trying to turn the YARIS into a show car, just thought I'd upgrade the rims while I needed to get new rubber.

I plan to plastidip the rims black and get red rim tape anyways unless they are new.

Please let me know what you think 👍


1) $190
Black miata compatable rims
http://vancouver.en.craigslist.ca/va...319484870.html


2) $300

Acura wheels 15" with tires 4x100
http://vancouver.en.craigslist.ca/rd...273075577.html


3) $300

16" Momo Rims with mounted Toyo Tires‏
http://vancouver.en.craigslist.ca/rd...305843974.html

4) $600 plus tax

17" 4x100 FRD Alloy wheels with 205/40R17 Special Buy!
http://vancouver.en.craigslist.ca/rd...311909134.html

5) same company as above and but $700 plus tax for 16" set ($100 more)

Replies 28

cali yarisCanoga Park, CA · Feb 5, 2014#2
Hard to say, since I know nothing about your car. Color? Lowered?

The Acura rims are just horrible.

The Momos don't say 4x100 and the tire size is not quite right for the yaris. But I like the look.

Can't tell about the 17s'. You'll sacrifice some ride quality and they might be heavy (dont' know the weight).
WeeYariGeorgetown, Ontario, Canada · Feb 5, 2014#3
Out of those indicated, definitely the Momos if they are 4x100. Yes the tire size is not ideal. The sidewalls are a little short. 195/50 is a nice size on 16s.

All the other options 👎 imo
rcvminiThread starterVancouver BC · Feb 5, 2014#4
OH sorry my Yaris is a metalic white 2009 HB 4door stock. 14 inch steel rims.

The momo's might not be the right size? they say
"Momo Rims x4
Size 16" (4 bolt pattern)"

so i thought they would fit
WeeYariGeorgetown, Ontario, Canada · Feb 5, 2014#5
There is the possibility that the momos are 4x114.3 and would not fit.

The 100 or 114.3 is the distance between studs.
rcvminiThread starterVancouver BC · Feb 5, 2014#6
WeeYari - thanks for your input. If the momo's don't fit I may go for the black miata ones. Once again I'm not trying to pimp out the yaris, just would like rims as I hate the steel rims.
WeeYariGeorgetown, Ontario, Canada · Feb 5, 2014#7
If you end up contacting the seller to verify the 4x??? question, also ask what the offset of the wheels are. There should be a number stamped on the back side. This would be a 2 digit number probably in the range of 40 something to 30 something.
rcvminiThread starterVancouver BC · Feb 5, 2014#8
Originally Posted by WeeYari ↑
If you end up contacting the seller to verify the 4x??? question, also ask what the offset of the wheels are. There should be a number stamped on the back side. This would be a 2 digit number probably in the range of 40 something to 30 something.
Ok thanks for the good info and sorry about being such a newb at this

He just emailed back saying they should fit as I told him it was a yaris and that these rims came off his acura.
rcvminiThread starterVancouver BC · Feb 5, 2014#9
He just checked and the MOMOs are ET35 will this be an issue on tires he has now? This is outside the offset recommended on the wheel guide on this site

Toyo Proxes4 x4
Size 205/40ZR16 83W
ExiwolfmanWasaga beach · Feb 5, 2014#10
Like the momo also 17 look nice ...I would stick with 16 max
rcvminiThread starterVancouver BC · Feb 6, 2014#11
Yeah I like the 17s too. They can do 16s in a few different styles with tires, all new but they would want 699 plus tax (all in mounted balanced and out the door)

The momo are "ET35" and tire size is 205/40r16 I can't find a match in the wheel gude page. I am still concerned this will cause problems with my stock suspension? ??

This also just got posted but i dont know if 205/50r16 is too big for stock setup
http://vancouver.en.craigslist.ca/rd...309665736.html
WeeYariGeorgetown, Ontario, Canada · Feb 6, 2014#12
Originally Posted by rcvmini ↑
The momo are "ET35" and tire size is 205/40r16 I can't find a match in the wheel gude page. I am still concerned this will cause problems with my stock suspension? ??
No, you will be fine. With the short tires tho, your wheel gap is going to be big enough to stuff a football into.
kimonaHuntington Bch, CA · Feb 6, 2014#13
I'd check out the "Miata" wheels.
rcvminiThread starterVancouver BC · Feb 6, 2014#14
Thanks everyone,

Looks like I'm going to check out the momo rims this saturday.

Wee Yari - if I lower the car with springs I take it that would reduce the gap and make the tires fit better? saw some springs that would lower the car 1.5 inches

These springs here seems to have good reviews. LoTek and M2

http://www.ebay.com/itm/4-NEW-Lotek-...16b28f&vxp=mtr

kimona - seconed option is to have a look at the 'miata' ones but he is further away then I thought
* btw nice avitar - i'm going to get an outfit like that for the wife !
IllusionXBrossard, QC · Feb 7, 2014#15
for this price, i would catch it when the microimage springs go on sale. I bought mine for 99$.. obviously plus shipping
WeeYariGeorgetown, Ontario, Canada · Feb 7, 2014#16
Dropping 1.5" should leave you with a sloppy two finger gap unless you have sausage fingers, in which case it would be a tight two finger gab.

ET35 + 205 tires may mean that you will experience mild buzzing in the rear as the tires rub against the fender liner going over hard dips or with a load of passengers and stuff.

One of my sets of wheels was 16" ET42 clad with 195/50 tires. These were coupled with 10mm spacers giving me an effective offset of 32. The rear right would rub. Had to introduce mild camber washers to tip the top of the wheel inward enough to totally clear the liner.
cali yarisCanoga Park, CA · Feb 7, 2014#17
ET35 + 205 tires may mean that you will experience mild buzzing in the rear as the tires rub against the fender liner
That sounds right to me, but does the Yaris have fender liners in the rear? Usually rubbing in the rear happens right on the fender edge.
WeeYariGeorgetown, Ontario, Canada · Feb 7, 2014#18
^ Sorry, that is correct. I was envisioning a liner, but that is only in the lower rear portion of the wheel well. So yes, the rub will occur in the fender lip at the top of the arch.
rcvminiThread starterVancouver BC · Feb 12, 2014#19
16 inch MOMO RIMS
Radvr6tVancouver,Canada · Feb 12, 2014#20
post up a pic of the car
rcvminiThread starterVancouver BC · Feb 13, 2014#21
Originally Posted by Radvr6t ↑
post up a pic of the car


here it is! 👍

We fit them to make sure the bolt pattern worked. Noticed the lug nuts are small on the stock rims and sink deep into the new rim lug holes. Do I HAVE to buy new longer lug nuts?

1 attachment not included in this copy

WeeYariGeorgetown, Ontario, Canada · Feb 13, 2014#22
5 lug hubcaps 👎 Use those suckers for skeet shooting now!!!

That one Momo appears to be in pristine condition. Are the other 3 equally as nice?
rcvminiThread starterVancouver BC · Feb 13, 2014#23
Originally Posted by WeeYari ↑
5 lug hubcaps 👎 Use those suckers for skeet shooting now!!!

That one Momo appears to be in pristine condition. Are the other 3 equally as nice?
Hahaha yeah I didn't realize the 5 bolts on the caps till went to take off a tire.

Yes they were all in really good condition.bit 2 hav3 crub rash. Im going to plasti dip them black.

So do I need longer lug nuts? Also what size threads are they on the yaris?
IllusionXBrossard, QC · Feb 13, 2014#24
Originally Posted by rcvmini ↑
Hahaha yeah I didn't realize the 5 bolts on the caps till went to take off a tire.

Yes they were all in really good condition.bit 2 hav3 crub rash. Im going to plasti dip them black.

So do I need longer lug nuts? Also what size threads are they on the yaris?
12x1.5. I would get this since the hole seems to be tight fit.

1 attachment not included in this copy

rcvminiThread starterVancouver BC · Feb 13, 2014#25
Originally Posted by IllusionX ↑
12x1.5. I would get this since the hole seems to be tight fit.
Saw some nice metalic red ones but I have to order them Could I use the stock shorter ones in the mean time?
ExiwolfmanWasaga beach · Feb 13, 2014#26
Pics please with wheels on the car...nice rims :)
7:34pmBritish Columbia · Feb 14, 2014#27
Those will look nice on the white car!
Radvr6tVancouver,Canada · Feb 17, 2014#28
Vancouver local👏
CTScottUSA, CT · Feb 17, 2014#29
Originally Posted by rcvmini ↑
Saw some nice metalic red ones but I have to order them Could I use the stock shorter ones in the mean time?
The depth of the wheel's lug nut holes doesn't matter. The key is to look at the shape of the surface that the lug nut touches and make sure that it is the same shape as the lug. So, if it has a taper (and the angle of the tapers match), you would use tapered lugnuts (which is what the OEM ones for the steelies are). Some alloy rims have really tight holes, where you can't fit the stock lugs with a wrench into. In that case you have to use smaller outer dimension lugs.