Yarisworld Archive

No stereo at all won't even turn on

14 posts · 3,680 views

400 dollar yarisOriginal postBowling Green, Ohio · Feb 1, 2014#1
I was trying to get my amp out of protection mode and now my stereo in my car won't even turn on ? What the hell ? I disconnected everything from the amp but I get nothing ? Help

Replies 13

400 dollar yarisThread starterBowling Green, Ohio · Feb 1, 2014#2
Anyone know what fuse for the car stereo ?
400 dollar yarisThread starterBowling Green, Ohio · Feb 1, 2014#3
i think it may be a blown fuse. im trying to figure out why the amp wouldnt come out of protection mode. before it blew the fuse by my dumbass accidentally touching the wires together, it was working fine until the past few days had been really cold. then it went into protection mode which started causing problems and no output.
_S7V7N_South Texas · Feb 1, 2014#4
Fuse cover under dash has a diagram on it and lists fuses. Also if you have an aftermarket headunit check fuse on that as well.

How you testing fuses ?
400 dollar yarisThread starterBowling Green, Ohio · Feb 1, 2014#5
I replaced the fuse and tested all wires with a light and they all have power the ground doesn't make the light come on does that mean I have a bad ground ?
400 dollar yarisThread starterBowling Green, Ohio · Feb 1, 2014#6
i have removed everything from the amp except for the ground power and remote wire. it is still in protection mode so i brought the amp inside to have it warm up. can it be too cold for the amp to work? i know that they can overheat but idk if the amp can freeze. im about to check the wires on the subwoofer itself, but if that is ok i dont know what could be causing the amp to be in protection mode.
ExiwolfmanWasaga beach · Feb 1, 2014#7
Originally Posted by 400 dollar yaris ↑
i have removed everything from the amp except for the ground power and remote wire. it is still in protection mode so i brought the amp inside to have it warm up. can it be too cold for the amp to work? i know that they can overheat but idk if the amp can freeze. im about to check the wires on the subwoofer itself, but if that is ok i dont know what could be causing the amp to be in protection mode.
Crossed speaker wire , loose or touching is oje possibility for amp to go protect mode as for deck if after market it will have its own fuse on the back ...like 10amp
400 dollar yarisThread starterBowling Green, Ohio · Feb 1, 2014#8
im using the stock head unit and i made sure non of the speaker wires are touching
_S7V7N_South Texas · Feb 1, 2014#9
Does your radio turn on ?
400 dollar yarisThread starterBowling Green, Ohio · Feb 1, 2014#10
Yes it does turn on . There is just no output to the speaker because the amp is in protection mode.
_S7V7N_South Texas · Feb 1, 2014#12
How are you running Rca's to amp ?

What brand amp ?
400 dollar yarisThread starterBowling Green, Ohio · Feb 2, 2014#13
i have a lanzar vector 1000 watt amp VCT-2110 I have a line out converter connected to the back speakers and the RCA wires running from that to the amp. the thing is it was working perfectly until it got really cold here. then it went into protection mode for no reason. i didnt touch my set up at all that has been working perfectly for well over a year.
_S7V7N_South Texas · Feb 2, 2014#14
Install amp in somebody elses car then. If it still protects time for a new one.