Yarisworld Archive

HVAC Fan

18 posts · 7,603 views

CB900F2Original postToronto · Jan 25, 2014#1
Hey guys..

I was talking to the wife today in the car and I had the HVAC set to speed 1, and she commented how loud a hum it makes... I always knew it was loud, but I guess over the years I kinda forgot how loud it was...

How loud do you guys/gals find your fan when set to the first speed setting??

Again, it is a very noticeable hum sound at this setting.. And the cold really has not effect, and it is the same even in the summer....

Thanks everyone..

Replies 17

RJayHolland · Jan 25, 2014#2
No, on the first two settings my fan actually barely makes any noise. With or without a/c on.
off course on the second it does make some noise but it's easily drowned out by the radio.
CTScottUSA, CT · Jan 25, 2014#3
If you do not have a cabin air filter installed the hum may be due to something having been sucked into the fan (like a piece of paper from the glovebox).
IllusionXBrossard, QC · Jan 25, 2014#4
Mine does make a little humming sound when it's running. I should make a video of the sound. Not sure how well it will turn out but i'll try...

I don't like the noise it makes, but i guess it's the way it is.. My Echo made the same noise.
Bluevitz-rsOshawa, Ontario, Canada · Jan 26, 2014#5
my Echo's doesn't make any noise other than the sound of air coming through the vents.
CB900F2Thread starterToronto · Jan 26, 2014#6
Hi Scott.. I had a cabin filter front new.. I did find a another thread and it was noted that toyota changed the part# of the blower around 2010/09 , so I am going to assume they revised the blower motor and maybe to address it being a bit noise.


Originally Posted by CTScott ↑
If you do not have a cabin air filter installed the hum may be due to something having been sucked into the fan (like a piece of paper from the glovebox).
CTScottUSA, CT · Jan 26, 2014#7
Originally Posted by CB900F2 ↑
Hi Scott.. I had a cabin filter front new.. I did find a another thread and it was noted that toyota changed the part# of the blower around 2010/09 , so I am going to assume they revised the blower motor and maybe to address it being a bit noise.
Interesting - I just looked in the EPC and there are 2 different part numbers. 87103-52140 and 52141. I have 52140 on my 07 and 08 and 52141 on my 09. I don't hear a difference between them. The part number is on the center of the bottom of the blower motor.
Bluevitz-rsOshawa, Ontario, Canada · Jan 26, 2014#9
It just sounds like bad bearings to me.
Bluevitz-rsOshawa, Ontario, Canada · Jan 26, 2014#11
900, that sky drive thing doesn't work for me. Can you put it up on YouTube or photobucket?
CB900F2Thread starterToronto · Jan 26, 2014#12
Hi Blue... I used my drop box and tested it from another workstation and all is good to watch and hear the loud hum....

my link is ^^^

regards


Originally Posted by Bluevitz-rs ↑
900, that sky drive thing doesn't work for me. Can you put it up on YouTube or photobucket?
IllusionXBrossard, QC · Jan 26, 2014#13
Originally Posted by Bluevitz-rs ↑
It just sounds like bad bearings to me.
I think CB900's sounds like a bad bearing. Mine always sounded like in my youtube video... and my Echo also sounded like this...
CTScottUSA, CT · Jan 27, 2014#14
It definitely does not sound normal. I haven't taken one far enough apart to see if the motor has bearings or is simply a cheap bushing type motor. I have a couple of quiet spares on hand, if you would like to replace it.
CB900F2Thread starterToronto · Feb 10, 2014#15
Hey guys..

Ordered a replacement from rockauto, and installed it an all is good now....nice and quiet..

I decided to take apart my old one too see what was the issue, and when I took apart the motor, it was a bad bearing... It was a bitch to take off the fan , not meant to be serviced..


Originally Posted by CTScott ↑
It definitely does not sound normal. I haven't taken one far enough apart to see if the motor has bearings or is simply a cheap bushing type motor. I have a couple of quiet spares on hand, if you would like to replace it.
Bluevitz-rsOshawa, Ontario, Canada · Feb 10, 2014#16
Cool. Any pictures you could take? Also, do you think you could put it back together and use it again?
fasteddie07NorCal · Jun 7, 2014#17
CB900F2: Do you have the part # for what you purchased from rockauto?

My fan's noist too...

TIA
CB900F2Thread starterToronto · Jun 10, 2014#18
Hi Fasteddie... The part search tool at Rockauto is very easy to use... There is only one supplier (TYC) listed..