Yarisworld Archive

Stealth gauge cluster install

26 posts · 11,651 views

CrankyOldManOriginal postWest Michigan · Jan 25, 2014#1
So I've finally started working on my gauge cluster install. At the moment, I have a Scangauge II, an AEM AFR and an AEM boost (0-15 psi). The keylock switch is for replacing the Blitz engagement position knob, since I have learning drivers in the family that don't need access to boost when they're learning to drive.

My intention is to keep it as "sleeper" as possible, so they're going inside the driver's glovebox. I started with some cereal box cardboard to make a rough mock up and then transferred the shapes into CAD. I will probably use plastic since it's easier to machine and assemble, but I may go to sheet aluminum for a more professional product once the plastic one is verified.

Here's what I've got so far:

3 attachments not included in this copy

Replies 25

CTScottUSA, CT · Jan 25, 2014#2
Very cool!
WeeYariGeorgetown, Ontario, Canada · Jan 25, 2014#3
Nice. I don't feel the need for a more 'professional' aluminum version. The plastic looks sweet.
CrankyOldManThread starterWest Michigan · Jan 25, 2014#4
Originally Posted by WeeYari ↑
Nice. I don't feel the need for a more 'professional' aluminum version. The plastic looks sweet.
It's neither at the moment, these are just CAD renderings. Even if it was aluminum, I'd probably paint it black or grey instead of leaving it metallic.
white_riceOntario, Canada · Jan 26, 2014#5
Love it!
cali yarisCanoga Park, CA · Jan 26, 2014#6
I have to ask why you'd put gauges inside the glovebox, or on the passenger side in general.
Doesn't that make them useless for any real time information?
CrankyOldManThread starterWest Michigan · Jan 27, 2014#7
Originally Posted by cali yaris ↑
I have to ask why you'd put gauges inside the glovebox, or on the passenger side in general.
Doesn't that make them useless for any real time information?
While they will be below eye level, they'll still be useful, just not as immediately visible as an A-pillar pod. I agree that having them on the passenger side is silly, hence the driver's side glove box. My biggest goal is to keep it stealth--i.e. closing the lid of the glovebox when I park but flipping it up when I'm driving. At the moment that's how I use my scangauge--but it's just loose in the glovebox with the OBD II cable hanging out like a piece of spaghetti.
malibuguyWestminster, MD · Jan 27, 2014#8
Badass. Sometimes I'm jealous of the hatchet guys and their extra compartment
tk-421Dagobah · Jan 28, 2014#9
That looks super clean. Great job!
Any chance of making a few extra panels? I don't have any of those gauges, but I can think of a couple of uses for an uncut version, especially if it came with a lock & key and a hinge on the left side. 😉
CrankyOldManThread starterWest Michigan · Jan 28, 2014#10
@tk - the keylock is just an electrical switch. It will be replacing the one that comes with the Blitz:
Picture not included in this copy

Once I make the prototype and verify that it fits, I'll share the measured drawings. Making extras will depend on the material that I go with. Acrylic is super easy since I can laser cut it. Aluminum or other plastics will be more work since I have to CNC them in a mill, or make them by hand.
tk-421Dagobah · Jan 28, 2014#11
Very nice. 👍
I'll be watching this thread attently!
CrankyOldManThread starterWest Michigan · Mar 7, 2014#12
As a heads up: I've got a few small sheets of "one side matte" black acrylic on the way. I'll make a prototype for my glovebox and tweak all the angles so that it fits nicely. After that, I'll post up some pics and pricing info. Just like the Blitz gaskets, I'm not looking to profit much from them, just covering the cost of materials and shipping.
CrankyOldManThread starterWest Michigan · May 13, 2014#13
Soon...


As in, I'm cutting them on the laser right now.
kounj · May 14, 2014#14
Looks good. That's where I put my AFR,boost,oil pressure and water temp gauges.
CrankyOldManThread starterWest Michigan · May 14, 2014#15
Dry fit today, camera battery was dead. Pics tomorrow, I think.
CrankyOldManThread starterWest Michigan · May 15, 2014#16
Ok, pics of it sitting in the install location. It needs a lot of refinement before it looks like it was supposed to be there in the first place.

1 attachment not included in this copy

Ryze268Antigua & Barbuda · May 15, 2014#17
I like it, looks real professional :)
CrankyOldManThread starterWest Michigan · May 15, 2014#18
Thanks. It's really hard to get a good picture of it installed. I still have to put all of the bracing and supports on it, refine the corners, verify the keylock location, install the LED and a few other minor adjustments. Once I get that all set up I may do a short production run of blanks, or offer custom cutouts for a modest fee.
ilikericesavannah, ga · May 15, 2014#19
Looks really good. Kudos
justjesusOrange County · May 16, 2014#20
It looks good. I totally love the use of CAD for the renderings!

(I just started learning CAD myself. Neat to see a "practical" use for it!)

I used to keep my scangauge in the d/s glovebox too. close it when not in use so people don't see it.
DeadliestfleaJun 8, 2014#21
what would the old area of the cluster look like ??? it would look like somethings missing after....a better idea would do hide boost and pressure gauges under that glove box and keep the stock cluster
jpmck03USA · Jul 6, 2014#22
Originally Posted by Deadliestflea ↑
what would the old area of the cluster look like ???
It would look exactly the same...

Originally Posted by Deadliestflea ↑
... a better idea would do hide boost and pressure gauges under that glove box ...
That's exactly what he did...

Originally Posted by Deadliestflea ↑
... keep the stock cluster
Who said anything about removing the stock gauge cluster?

🤷
MyzticZ3r0Las Vegas, NV · Jul 6, 2014#23
legit!
CrankyOldManThread starterWest Michigan · Jul 6, 2014#24
Originally Posted by Ludo ↑
Looks sweet, I've been thinking of making something similar myself. But my motivation stopped before I could get around an measure the glove compartment.

I'd really like to by the cad file, and make one for my self.
Once I get it refined, I'll share it. Right now it doesn't fit that well.
ferdinandyLA · Nov 6, 2016#25
Anyone have any updates on these stealth installs? You would love to these as well.
CrankyOldManThread starterWest Michigan · Nov 7, 2016#26
I never finished it, and have just recently uninstalled the supercharger. If you're interested, I can share the svg for the profile.

Sent from my MotoG3 using Tapatalk