mpcv2000Original postMontreal , Quebec , Canada · Jan 24, 2014#1I just got my summer wheel today and I was unable not to test fit them.
Close out wheels from Tire Rack .
MSW 15"X6.5" 42 ET and with some Nitto NeoGen 205/50R15 bought at Tire Discount Direct.
1st picture is no spacer front and no spacer rear.
Picture not included in this copy
This one I've added about +10mm washers on the back to see what it looks.
( I do this only for looks by the way ) and I think I like it better but on some angle it's not the best look.
I took some measurement and if I'm not mistaking there is about 20mm width difference between the front and rear "hub to hub" outside so with a +10 I'm cutting this in half and I don't have aggressive driving so no need to roll the rear fenders .
I have Tanabe DF210 up front 1.5" & some innexpensive eBay coil springs on the back so the drop is moderate .
Picture not included in this copy
I have to make up my mind on Spacer or not.
I'll try to post some different angle shots tonight.
Replies 15
mpcv2000Thread starterMontreal , Quebec , Canada · Jan 24, 2014#2Other angles.
No spacer ( always talking about the rear ) :
Picture not included in this copy
10mm spacer :
Picture not included in this copy
No spacer :
Picture not included in this copy
10mm Spacer :
Picture not included in this copy
No spacer :
Picture not included in this copy
10mm Spacer :
Picture not included in this copy
With spacer still :
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
ExiwolfmanWasaga beach · Jan 24, 2014#3I like no spacers ....I for one do not like flash look on car ,tire with fender or tire out that is just my opinion. ?.with spacers it just looks out of place.
ExiwolfmanWasaga beach · Jan 24, 2014#4PS looks awesome
mpcv2000Thread starterMontreal , Quebec , Canada · Jan 24, 2014#5 Originally Posted by
Exiwolfman ↑ I like no spacers ....I for one do not like flash look on car ,tire with fender or tire out that is just my opinion. ?.with spacers it just looks out of place.
I agree with you , I may try 5mm just to see.
They are just regular 1/2" Home Depot Style washers , right now I have 4 on each studs and obviously I'm not driving the car anywhere with a setup like that .
I bought them today just to see how it looks with spacers before buying some because I don't know if I will like it neither how thick I want them if I ever go that way.
Picture not included in this copy Picture not included in this copy ExiwolfmanWasaga beach · Jan 24, 2014#6Must say cool way of finding out proper fit...I would say maybe 5mm in rear...im 42 offset too with my new summer wheels on a 07 yaris looks just fine ya maybe less offset in the rear would be cool..but im fine with it also dont like what spcers do to wheel bearings.
kimonaHuntington Bch, CA · Jan 24, 2014#7Wheels and tyres look great! (I replaced the original Bridgestones with Nitto Neo Gens; handling was outstanding, but highway wander was terrible). I like the no spacer photos best.
CTScottUSA, CT · Jan 24, 2014#8 Originally Posted by
kimona ↑ Wheels and tyres look great! (I replaced the original Bridgestones with Nitto Neo Gens; handling was outstanding, but highway wander was terrible). I like the no spacer photos best.
Did you have a rear sway bar? I have been running 16" 205 Neo Gens on my TTE wheels for the past two years and they have been excellent with no highway wander from them. My only complaint is that they are pretty noisy.
mpcv2000Thread starterMontreal , Quebec , Canada · Jan 24, 2014#9Thanks for all the inputs.
I love the NeoGen , I never had that feeling on my car ( Hwy Wander ) but never had those on a Echo either .
I've been using the NeoGen up front on my cars for the past 10 years .
I had some on a
1989 Mazda and on a
2000 Mustang GT and always love them but I don't do any agressive drive or lapping , etc.
kimonaHuntington Bch, CA · Jan 24, 2014#10 Originally Posted by
CTScott ↑ Did you have a rear sway bar? I have been running 16" 205 Neo Gens on my TTE wheels for the past two years and they have been excellent with no highway wander from them. My only complaint is that they are pretty noisy.
Rear TRD anti-sway bar improved stability and showed some decrease in highway wander. But, the right tread pattern completely eliminated highway wander without a rear anti-sway bar.
mpcv2000Thread starterMontreal , Quebec , Canada · Jan 26, 2014#112nd test :
My guess was 4 washers = 10mm and I was right on.
Picture not included in this copy
so I'm cutting it in half and I'm right at 5mm .
Picture not included in this copy
This is going to be it. I have ordered 2 X 5mm spacer.
I like it better.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Front looking to the rear
Picture not included in this copy
I'm not even close to put those wheels on , I'm on winter mode for at least 2 more months , it will give plenty of time for my spacers to arrive. 👍
ExiwolfmanWasaga beach · Jan 26, 2014#12Looks good with 5mm ...im in winter mode too two more months sucks so sick of snow lol
ViperoniBrampton, ON · Jan 28, 2014#13By default, the Echo's more "tucked in" the rear than it is in the front... but that's because the rear has zero camber gain and rubs a bit more with the same wheel/tire package I've found.
I like the look of the 10mm spacers, but you'll probably rub with a 205 tire....
mpcv2000Thread starterMontreal , Quebec , Canada · Jan 29, 2014#14Can't wait to spring to give the new setup a try.
Radvr6tVancouver,Canada · Feb 10, 2014#15Should have gone 195 55 r 15 and with the 10mm and it would prob not rub. It still looks good with the tires on it and the 10mm.
Post up where you are gonna get spacers from , I know i might need a set also for my Schmidt wheels im doing on my echo hatch.
mpcv2000Thread starterMontreal , Quebec , Canada · Feb 10, 2014#16I bought some inexpensive eBay billet HubCentric Wheel Spacers 4x100mm 0.20" ( 5mm ) 54.1mm bore that I paid $19.99 a pair free shipping to Florida , they came in a while back but I live in Montreal and should go down to Florida next month to pick up all kind of stuff I'm having shipped there.
Picture not included in this copy
Went down there last fall brought some stuff back and I'll do the same again next month. 👍
I also bought some camber bolts because I think I may be in need of some positive camber a little but I'll find out this spring. I'll put them in anyway.