Yarisworld Archive

Belly Pan / Under Carriage Cover anyone ?

19 posts · 23,959 views

JimKellyfanOriginal postthe good Carolina · Jan 21, 2014#1
Having worked on many models, and of course the changing times, you see differences. Like the Prius and it's mileage gains (as well as other models and makes).
-You see the feather light rims.
-You see the headlamp (where it meets bumper) is tucked under the bumper at the front
You see underpinnings/belly pan/undercarriage covers, especially on the Prius and Fusions, as well as others. (my 10 has small beginnings of what the Prius has)
Of course the aero body isn't the only thing saving fuel, it's the other tech stuff too like direct injection with no fuel return in a sealed environment, tighter and more gears, and so on.
----Has anyone found belly pans on the newer Yarii ?
----Has anyone made one up or used one from another vehicle that would fit from the Yota family ?
Just curious, but I think that would help squeak some more miles per gallon out on the highway.
Body gap trim would be another idea, but I would think a belly pan that is usable, and wouldn't over heat the engine or trans would be a good thing for mileage.
Thoughts ?

Replies 18

CTScottUSA, CT · Jan 21, 2014#2
Originally Posted by JimKellyfan ↑
Having worked on many models, and of course the changing times, you see differences. Like the Prius and it's mileage gains (as well as other models and makes).
-You see the feather light rims.
-You see the headlamp (where it meets bumper) is tucked under the bumper at the front
You see underpinnings/belly pan/undercarriage covers, especially on the Prius and Fusions, as well as others. (my 10 has small beginnings of what the Prius has)
Of course the aero body isn't the only thing saving fuel, it's the other tech stuff too like direct injection with no fuel return in a sealed environment, tighter and more gears, and so on.
----Has anyone found belly pans on the newer Yarii ?
----Has anyone made one up or used one from another vehicle that would fit from the Yota family ?
Just curious, but I think that would help squeak some more miles per gallon out on the highway.
Body gap trim would be another idea, but I would think a belly pan that is usable, and wouldn't over heat the engine or trans would be a good thing for mileage.
Thoughts ?
Micro Image used to sell one that went from the bumper to the subframe (almost identical to the one made by C One, but easier to take on and off). Below is a link to the thread on it. There is also a thread on the Micro Image forum on a rear one that someone fabricated (and added a rear diffuser to).

Sitting under mine while they are on the lift I strongly believe that the Yaris would benefit from as much underpanel as one could possibly add.

Micro Image underpanel install DIY
tk-421Dagobah · Jan 21, 2014#3
I have the MI one and it's great. It keeps the engine bay cleaner for longer. I also got it because I wanted to prevent the car from wobbling so much on the highway. I'd like to think that it worked, but I can't say for sure since I added a rear sway bar at the same time. 🙂
RJayHolland · Jan 21, 2014#4
That MI one looks very, very interesting. I'm going to keep that idea in mind if you please.
:)
dragoonmcIllinois · Jan 21, 2014#5
Micro Image no longer sells theirs.
JimKellyfanThread starterthe good Carolina · Jan 22, 2014#6
The alum. looks nice. I wonder on the weight it adds, as well as does the engine optimum temp change and the fan runs more or no ?
tk-421Dagobah · Jan 22, 2014#7
Not heavy at all. Engine temps are fine since there's still enough air flowing through.
It's one of those mods that complement the car really well.
CTScottUSA, CT · Jan 22, 2014#8
Originally Posted by tk-421 ↑
Not heavy at all. Engine temps are fine since there's still enough air flowing through.
It's one of those mods that complement the car really well.
I really should have bought a couple while Micro Image was selling them. I am in the process now of fabricating one myself for one of my cars which is missing the OEM plastic pieces. If it comes out good, then I will make two more for my other two streetable Yaris.
cali yarisCanoga Park, CA · Jan 22, 2014#9
We are talking to the fabricator about making more sets of these. Stay tuned. There's a thread on our forums about it.
RJayHolland · Jan 22, 2014#10
Originally Posted by dragoonmc ↑
Micro Image no longer sells theirs.
I want it for my BMW :) With a splitter up front. So I'd have to design it myself anyway.

@ M-I / Cali Yaris: Do you ship them to Europe as well for a p1?
CrankyOldManWest Michigan · Jan 22, 2014#11
Originally Posted by cali yaris ↑
We are talking to the fabricator about making more sets of these. Stay tuned. There's a thread on our forums about it.
^This. Do want.
ezhacker1San Francisco · Jan 22, 2014#12
I was thinking of making one that extended to the bottom edge of the bumper to protect it from driveway scrapes. I can care less about my stock bumper now, but when I ever do get a JDM one imported.
YaristeveLos Angeles · Jan 23, 2014#13
Those MI panels look really nice. But, would it be possible to modify it by installing little access doors (for oil filter and drain) instead of having to remove it completely (even though removal of the panel is made easier with the Dzus fasteners)?
AstromanWenatchee, WA · Jan 24, 2014#14
Originally Posted by cali yaris ↑
We are talking to the fabricator about making more sets of these. Stay tuned. There's a thread on our forums about it.
I looked and couldn't find the thread. I am interested in one as my plastic one is gone and I hated it anyway.
cali yarisCanoga Park, CA · Jan 26, 2014#16
Those MI panels look really nice. But, would it be possible to modify it by installing little access doors (for oil filter and drain) instead of having to remove it completely (even though removal of the panel is made easier with the Dzus fasteners)?
If you had one, you're welcome to cut a door and add hinges and a latch. From my side, that added to much cost to the part.
tk-421Dagobah · Jan 26, 2014#17
... not to mention, more moving parts = bigger possibility for failure. It might be a better idea to simply cut the hole and skip on the latch/hinges.
YaristeveLos Angeles · Jan 28, 2014#18
Originally Posted by cali yaris ↑
If you had one, you're welcome to cut a door and add hinges and a latch. From my side, that added to much cost to the part.
Originally Posted by tk-421 ↑
... not to mention, more moving parts = bigger possibility for failure. It might be a better idea to simply cut the hole and skip on the latch/hinges.
OIC. More a cost issue (nothing wrong with that) than a structural issue. Thanks.
JimKellyfanThread starterthe good Carolina · Jan 31, 2014#19
I just scarfed a rattling one from a Fusion at work. The insulation rattles cuz rookies didn't take off the oil filter or drain plug access covers, but pulled the whole thing and threw it on the floor repeatedly for 70k....If it fits kinda, I will make it work, of course after fixing said rattles.....I would think, scarfing one from a Prius would be best case scenario, though not sure which would fit best....Before I even mess with my underbelly though, I am awaiting 4 GTSpec bars first to be mailed to me then I will install, although, I will look at it plain and hold it up to see if I can do it....In any case, the thinner and lighter the better...