jambo101Original postMontreal Canada · Jan 20, 2014#12008 sedan, used to be i could activate the lights and locks from a good distance away now i have to be standing almost next to the car for the key to unlock the doors, after 7 years i'm assuming the battery in the key is finally needing replacement. i'm also assuming its just a matter of splitting the key taking out the old battery and installing a new one..
What battery am i looking for?
Thanks.
Nevermind ..i should have checked first.
Replacing automatic open and lock key.Replies 5
IllusionXBrossard, QC · Jan 20, 2014#2i'm still on my original battery, and it has not failed me so far.
I'm not sure if the chip key does something to the battery.. it shouldn't though. But it also depends where you are.. these keyless frequencies seems to be easily disrupted.
I'm able to activate it inside the office at work, while it wont do 10 cars length in a parking lot.
CTScottUSA, CT · Jan 20, 2014#3The transponder chip is a separate device from the remote.
You do just split the case to get at it, and the battery is a CR2016.
jambo101Thread starterMontreal Canada · Jan 20, 2014#4Transponder?😕 Will it need a replacement battery at some point?
CTScottUSA, CT · Jan 20, 2014#5 Originally Posted by
jambo101 ↑ Transponder?😕 Will it need a replacement battery at some point?
No. It is a passive transponder, which gets powered by the radio frequency from the reader which is built into the ignition switch assembly.
auxmikeLI, New Yawk · Jan 20, 2014#6So glad my 2008 doesn't have that. I put in the $49 Viper keyless entry....
Also, I can get my keys made at the hardware store for about $2.50. No transponder chip!