Yarisworld Archive

exhaust systems

38 posts · 24,407 views

japleOriginal postKuala Lumpur, Malaysia · Dec 23, 2013#1
I do believe there is a thread for this topic, but i cant seem to find it, so i will just ask here, i am driving an automatic 1.5 bone stock, except for the H&R sport springs and whole lot of UR bars, what would be the best combination exhaust for low and mid range power / torque?

Replies 37

tk-421Dagobah · Dec 23, 2013#2
Honestly, OEM is the best for low end power. Any aftermarket axleback should give you slight mid and high end power, but tread carefully if you really don't want to lose too much torque on the low end.
japleThread starterKuala Lumpur, Malaysia · Dec 23, 2013#3
Problem is i am losing power on the whole band.... torque is very unstable. Seems like the car has got a unstable pms. Sometimes there is power, sometimes she feels like sleeping.
willygoodnessqld · Dec 23, 2013#4
try an engine ground cable kit thingo. made a difference to may engine acceleration through the revs from 2000 to near redline
cali yarisCanoga Park, CA · Dec 23, 2013#5
Start with an axle-back, see how you like it, then add a header if you want more top end.
Tanabe Medalion Touring is my favorite exhaust for this car ever, but we also carry DC Sports, Megan, Nitto, etc.

I will respectfully disagree with tk-421. Here is a recent dyno showing that an axle-back can make more power THROUGHOUT the power range, including low end:
(thanks to tooter for going to the trouble and expense of dynoing his car and posting the results)

Picture not included in this copy
tooterLos Angeles · Dec 24, 2013#6
I think that chart represents the approximate gain you would get for any of the axle back exhaust systems that use a 2.25" pipe with a 2.25" core muffler even if they are shorter than this one...

Picture not included in this copy
japleThread starterKuala Lumpur, Malaysia · Dec 24, 2013#7
so what you are saying is that i change my piping to 2.25? what else do i change? i am bone stock. do i mess around with a rear cat delete?
japleThread starterKuala Lumpur, Malaysia · Dec 24, 2013#8
Originally Posted by tooter ↑
I think that chart represents the approximate gain you would get for any of the axle back exhaust systems that use a 2.25" pipe with a 2.25" core muffler even if they are shorter than this one...

Picture not included in this copy
axleback is just this section? i dont get the definition
japleThread starterKuala Lumpur, Malaysia · Dec 24, 2013#9
Originally Posted by willygoodness ↑
try an engine ground cable kit thingo. made a difference to may engine acceleration through the revs from 2000 to near redline
i might have found a small problem, my airfilter was clogged.... after washing it, the response was slightly better, but still.....
tk-421Dagobah · Dec 24, 2013#10
Originally Posted by cali yaris ↑
Here is a recent dyno showing that an axle-back can make more power THROUGHOUT the power range, including low end
Were those dyno runs measured on a "bone stock AT Yaris" by any chance? 😉

I've read multiple reports from members complaining about low end power loss after an axleback swap with no other exhaust mods. All I'm saying is that opening up the exhaust on one end without making up for it on the other end is less likely to give worthwhile results.

To the OP: The way I was personally able to avoid losing low end power was to make the car lighter and swapping pulleys first. Only after doing that did I feel comfortable moving on to the exhaust. Personally I had great results starting from the front, so i started with an SRI, then the 1ZZ throttle body, then header, and finally a custom exhaust with 2.25 piping from the resonator back.

Obviously, I'm not saying "don't get an exhaust", just take the time to read some posts about some people's experiences and do it right the first time. Otherwise it's almost not worth it IMHO (althought the looks and deeper sound are very nice extras).
cali yarisCanoga Park, CA · Dec 24, 2013#11
<<Were those dyno runs measured on a "bone stock AT Yaris" by any chance? >>

I'm not sure how that's relevant. What matters is what was changed on the car between the runs. The only thing that was changed was the axle-back exhaust. The gains are clearly proven.
tooterLos Angeles · Dec 24, 2013#12
Originally Posted by japle ↑
axleback is just this section? i dont get the definition

Yes.

Axle back is just the section of the exhaust system behind the rear axle, and actually bolts on just in front of the rear axle.

If I were you, I wouldn't mess around with any of the rest of your exhaust, except perhaps an exhaust header right behind the engine. Those also don't require any cutting or welding and are relatively simple to install. This is my Weapon R header...

Picture not included in this copy

It's a beautiful design, even though no one ever sees it.

Many different axle back exhausts are available, and the nice part is that all of them are very easy to install as they just bolt on and use all of your existing stock rubber hangers. 👍

The Tanabe Medalion Touring axle back exhaust is especially nice and has a really mellow tone.

Picture not included in this copy
Greg
tooterLos Angeles · Dec 24, 2013#13
Originally Posted by tk-421 ↑
Were those dyno runs measured on a "bone stock AT Yaris" by any chance? 😉

I've read multiple reports from members complaining about low end power loss after an axleback swap with no other exhaust mods. All I'm saying is that opening up the exhaust on one end without making up for it on the other end is less likely to give worthwhile results.
That's an excellent point, tk. 🙂

The stock Yaris muffler has a pressure operated valve inside of it which provides more backpressure for better low end torque, and then opens up at higher rpms for better top end horsepower. I really didn't think it would hurt my engine's performance and got curious enough to find out. The dyno told the tale... a definite loss across the board. So my wife will just have to get used to the sound. 😉

While my engine block is totally stock with no tuning and stock ECU, the comparative dyno runs were all done with exactly the same bolt on parts with the axle back exhaust as the only change.

Equipment used in both dyno runs:

BLOX velocity stack air filter with short ram intake tube.
Corolla 55mm 1ZZ throttle body
tooter et aluminum intake manifold
Weapon R 4-2-1 exhaust header
japleThread starterKuala Lumpur, Malaysia · Dec 25, 2013#14
Originally Posted by tooter ↑
Yes.

Axle back is just the section of the exhaust system behind the rear axle, and actually bolts on just in front of the rear axle.

If I were you, I wouldn't mess around with any of the rest of your exhaust, except perhaps an exhaust header right behind the engine. Those also don't require any cutting or welding and are relatively simple to install. This is my Weapon R header...

Picture not included in this copy

It's a beautiful design, even though no one ever sees it.

Many different axle back exhausts are available, and the nice part is that all of them are very easy to install as they just bolt on and use all of your existing stock rubber hangers. 👍

The Tanabe Medalion Touring axle back exhaust is especially nice and has a really mellow tone.

Picture not included in this copy
Greg
problem is that in malaysia, nobody seems to sell the tanabe exhaust or the header. only cheapo china made headers which arent even equal length are for sale.
tooterLos Angeles · Dec 25, 2013#15
Originally Posted by japle ↑
problem is that in malaysia, nobody seems to sell the tanabe exhaust or the header. only cheapo china made headers which arent even equal length are for sale.

That's too bad... I sometimes see really neato aftermarket parts available in Japan that no one will ever get here in the US. Europe gets super economy 6 speed manual trans diesel Yaris' that we'll never see.

Can you buy online through ebay? They're a real convenient way to get stuff from outside the country as they automatically take care of the currency conversion.

Greg
japleThread starterKuala Lumpur, Malaysia · Dec 26, 2013#16
Originally Posted by tooter ↑
That's too bad... I sometimes see really neato aftermarket parts available in Japan that no one will ever get here in the US. Europe gets super economy 6 speed manual trans diesel Yaris' that we'll never see.

Can you buy online through ebay? They're a real convenient way to get stuff from outside the country as they automatically take care of the currency conversion.

Greg
The thing i really wish is to get JDM 1.5 4WD system that is only available in japan, either that or the british 1.8 that is only available there.

Ebay items are overpriced. I rather get it through japanese websites, but problem is that some sellers dont do international
BEEFnorth carolina · Dec 26, 2013#17
I'm pretty sure garm will ship wherever though i don't know how customs or taxes would be.

Several of us have done resonator back exhausts. just after the resonator is where the exhaust shrinks from 2" to 1.75". I went with a mandrel bent 2" exhaust with a glass packed muffler. I don't have any dyno sheets but am happy with it. it did require welding though.
japleThread starterKuala Lumpur, Malaysia · Dec 26, 2013#18
Originally Posted by BEEF ↑
I'm pretty sure garm will ship wherever though i don't know how customs or taxes would be.

Several of us have done resonator back exhausts. just after the resonator is where the exhaust shrinks from 2" to 1.75". I went with a mandrel bent 2" exhaust with a glass packed muffler. I don't have any dyno sheets but am happy with it. it did require welding though.
Can you post a picture of it? I mean the picture of the exhaust
cali yarisCanoga Park, CA · Dec 26, 2013#19
problem is that in malaysia, nobody seems to sell the tanabe exhaust or the header.
Happy to ship internationally, and those parts are usually in stock. 👍

I sometimes see really neato aftermarket parts available in Japan that no one will ever get here in the US.
I can import any product you can find from Japan. If you want to pay for it! 🙂

I'm pretty sure garm will ship wherever though i don't know how customs or taxes would be.
Thank you, yes I do, and we help minimize duties and fees as best we can.
japleThread starterKuala Lumpur, Malaysia · Dec 27, 2013#20
Originally Posted by cali yaris ↑
Happy to ship internationally, and those parts are usually in stock. 👍



I can import any product you can find from Japan. If you want to pay for it! 🙂



Thank you, yes I do, and we help minimize duties and fees as best we can.
You have somebody in japan that helps you to ship them? Can you do a direct shipment to malaysia instead of routing it to us then to malaysia? It would be a round the world for that item, lol
cali yarisCanoga Park, CA · Dec 28, 2013#21
I'm not sure. What's the part you have in mind?
japleThread starterKuala Lumpur, Malaysia · Dec 30, 2013#22
Exhaust, headers, bodyparts, 4wd tranny set...
yariseggvvtiCali · Dec 31, 2013#23
Originally Posted by BEEF ↑
I'm pretty sure garm will ship wherever though i don't know how customs or taxes would be.

Several of us have done resonator back exhausts. just after the resonator is where the exhaust shrinks from 2" to 1.75". I went with a mandrel bent 2" exhaust with a glass packed muffler. I don't have any dyno sheets but am happy with it. it did require welding though.
I got the same set up. 2 inch from resonator to TRD muffler. The sound is okay.
I just wondering what if I delete second cat and resonator with 2.5 all the back to
TRD muffler. I believe i will lose little bit of low end and got more high end. Also, I got DC 4-1 header.
Any suggestion or has anyone done it yet.
japleThread starterKuala Lumpur, Malaysia · Jan 28, 2014#24
would losing the 2nd cat lose low end?
RJayHolland · Jan 28, 2014#25
There are 2 cat's on these toyotas? No way.
Losing any cat increases torque, since it's basically a really thin straw the engine tries to breathe through. You might have issues with the emissions test though.
tk-421Dagobah · Jan 28, 2014#26
The second one isn't as important as the first one, but I wouldn't remove any of them.
malibuguyWestminster, MD · Jan 28, 2014#27
The flow is already set by the first cat...so removing the 2nd cat is only going to gain more noise then power.
cali yarisCanoga Park, CA · Jan 29, 2014#28
There are 2 cat's on these toyotas? No way.
Way!

Picture not included in this copy
japleThread starterKuala Lumpur, Malaysia · Feb 6, 2014#29
Originally Posted by cali yaris ↑
Way!

Picture not included in this copy
Yes, thats the stock yaris exhaust system that is on everyones beloved, including mine. I wouldnt mind removing the 2nd cat if it does increase torque in anyway, besides in malaysia there is no such a rule for emisions... the rules here are all bendable. Can anyone here prove that removing the 2nd cat increases or decreases power?

2nd issue is, i want an axleback exhaust, but i just cant find any here in malaysia, so it would have to be custom. Any suggestions? Mine is an automatic,.

3 issue is, changing the cat, i would like to change the 1st cat to a high flow, any suggestions on that too?

Thanks guys
WeeYariGeorgetown, Ontario, Canada · Feb 6, 2014#30
Isn't it 1 cat and 1 resonator, not 2 cats?
cali yarisCanoga Park, CA · Feb 6, 2014#31
^ No. Look at the diagram, you'll see both cats before the resonator (#5).
japleThread starterKuala Lumpur, Malaysia · Feb 7, 2014#32
Originally Posted by japle ↑
Yes, thats the stock yaris exhaust system that is on everyones beloved, including mine. I wouldnt mind removing the 2nd cat if it does increase torque in anyway, besides in malaysia there is no such a rule for emisions... the rules here are all bendable. Can anyone here prove that removing the 2nd cat increases or decreases power?

2nd issue is, i want an axleback exhaust, but i just cant find any here in malaysia, so it would have to be custom. Any suggestions? Mine is an automatic,.

3 issue is, changing the cat, i would like to change the 1st cat to a high flow, any suggestions on that too?

Thanks guys
Bump....
japleThread starterKuala Lumpur, Malaysia · Feb 16, 2014#33
Had this installed yesterday... noticeable gain in torque and reduction in engine grunt, especially when uphill drive, and much more smoothness, i mean it wont hold back the car when i release throttle....

Its a 4-2-1.

1 attachment not included in this copy

DJYojimboChicago · Feb 16, 2014#34
Weapon r header?
tooterLos Angeles · Feb 17, 2014#35
Originally Posted by DJYojimbo ↑
Weapon r header?
No. But it's a smoother flowing design than weapon R...

Picture not included in this copy

Picture not included in this copy


Who makes that?

Greg
japleThread starterKuala Lumpur, Malaysia · Feb 17, 2014#36
A company here called undersix exhaust. Malaysian made.

And its very light...
japleThread starterKuala Lumpur, Malaysia · Feb 17, 2014#38
Yep, i am proud of them, at least i know they are the real deal instead of rip offs...

Planning to do my full exhaust system with them soon.