Yarisworld Archive

AT to MT Conversion Kit Clearance Sale

27 posts · 22,259 views

CTScottOriginal postUSA, CT · Dec 20, 2013#1
I now have two complete Automatic to Manual transmission conversion kits on hand and really need to free up some space, so I offering them for a small fraction of the sum of the parts.

Price per kit: $400 plus shipping
One kit left - Clearance special: $250 + shipping


Kit includes:

Clutch and Flywheel:
Picture not included in this copy

Shifter and Shifter Cable:
Picture not included in this copy
Picture not included in this copy

Clutch and Brake Pedals:
Picture not included in this copy

Clutch Master and Slave Cylinders and lines:
Picture not included in this copy

Brake Master Cylinder:
Picture not included in this copy

Brackets and Hardware:
Picture not included in this copy


Optional:
2007-2008 MT ECM (programmed with your car's VIN): $50
If you have a 2009 or newer you will need to purchase an appropriate ECM from ebay, junkyard, etc. If you ship it to me I will reprogram it for you VIN for no charge.

C150 Manual Transmission (one available, needs rebuilding as synchros are bad): $100 + shipping

7 attachments not included in this copy

Replies 26

AstromanWenatchee, WA · Dec 21, 2013#2
Hm that's a pretty good deal.... do you have an idea what it would cost to have the trans rebuilt?
CTScottThread starterUSA, CT · Dec 21, 2013#3
Originally Posted by Astroman ↑
Hm that's a pretty good deal.... do you have an idea what it would cost to have the trans rebuilt?
No idea what a rebuild would run. The sum of the synchro rings looks to be about $150.

You could also pick up a used good MT from a local junkyard. They tend to run about $250 to $350 from what I have seen.
cali yarisCanoga Park, CA · Dec 22, 2013#4
That's awesome Scott. How many kits do you have on hand?
CTScottThread starterUSA, CT · Dec 22, 2013#5
Originally Posted by cali yaris ↑
That's awesome Scott. How many kits do you have on hand?
Two kits. One from a Yaris that I parted and one from one that I did a MT to AT conversion on.
47_MasoN_47Northwest Alabama · Dec 23, 2013#6
Man....

If I wasn't balls deep into rebuilding my truck's engine I'd buy one of these.
Ryze268Antigua & Barbuda · Dec 23, 2013#7
What's the shipping weight if you don't mind me asking? :)
CTScottThread starterUSA, CT · Dec 23, 2013#8
Originally Posted by Ryze268 ↑
What's the shipping weight if you don't mind me asking? :)
With the clutch and flywheel it is 68 lbs.
scottbebadboyGeorgetown ky · Jan 1, 2014#9
Scott. Is it very expensive to go from manual to auto? How hard of a job is it?
CTScottThread starterUSA, CT · Jan 1, 2014#10
Originally Posted by scottbebadboy ↑
Scott. Is it very expensive to go from manual to auto? How hard of a job is it?
What I have spent doing the manual to auto conversion is:

1. Automatic Transmission: $300

2. AT Shifter Assembly: $75

3. AT Shifter Cable: $107

4. AT Rear Frame Mount: $22

5. Shifter Cable mounting brackets and AT cooler hoses: $67

6. AT Wiring Harness: $80

7. AT ECM: $50

8. AT Brake Pedal: $50

9. AT Flywheel: $25


Labor-wise it is not that bad, as in my case I already had the engine out.
yarisgeo13North Lauderdale, FL. · Jan 1, 2014#11
Not bad idea but where I live, it's to much traffic and way to many stop lights to warrant a switch. I'll keep my car the way it is, stock auto transmission.
fnkngrvIn The Hotbox · Mar 24, 2014#12
Originally Posted by Astroman ↑
Hm that's a pretty good deal.... do you have an idea what it would cost to have the trans rebuilt?
I can tell you that so far from my research since I burned through my first C50 it was going to run me in the neighborhood of 1k-1200 to do a rebuild with two new gears from the Vibe. A good portion of that cost will be the tools as I have been informed at the least there is 400 in specialty tools alone. The biggest issue is that there really isn't a call for C50 rebuilds so most shops would need to procure the proper tools. 👎
White lightingCanada · Apr 1, 2014#13
Do you still
Have any left?


Sent from my iPhone using Tapatalk
mazillaSan Jacinto California · Apr 1, 2014#14
Well, it doesn't get much easier than that...



Bravo
CTScottThread starterUSA, CT · Apr 1, 2014#15
Originally Posted by White lighting ↑
Do you still
Have any left?


Sent from my iPhone using Tapatalk
Yes.
CTScottThread starterUSA, CT · Nov 18, 2014#16
I still have one of these kits left and to get it out of my garage, I will let it go for $250 + shipping.
CrankyOldManWest Michigan · Nov 18, 2014#17
Can I put it on layaway? I just started my first "real" job as a salaried engineer, and I'll have some money to play with in about 2 weeks.
CTScottThread starterUSA, CT · Nov 18, 2014#18
Originally Posted by CrankyOldMan ↑
Can I put it on layaway? I just started my first "real" job as a salaried engineer, and I'll have some money to play with in about 2 weeks.
Sure. And, congrats on the new job!
CrankyOldManWest Michigan · Nov 19, 2014#19
Thanks! I've got my pre-swap C50 sitting on the workbench, with dreams of using it to convert an auto to a manual since they're so much easier to find. I want to start rallyX or stage rally soon, but don't want to feed rocks to the undercarriage of my DD, so this would be an excellent starting point!
07dirtyarishillview, ky · Apr 26, 2015#20
Did you end up selling this to him? I see it's been several months now but thought I would check. I'm planning on doing the conversion later this summer, I'd love to buy that kit for that price

I've done a decent amount to my car so far, a long way to go and learned A LOT from these forums. On my first post I wanted to thank you CTScott among others like Garm and TTR, your research and insight on the yaris has let me believe I can actually build my own stage rally car!!
CTScottThread starterUSA, CT · Apr 26, 2015#21
I still have one kit on hand
AstromanWenatchee, WA · Apr 27, 2015#22
How much is the full swap kit again? Auto to manual.
07dirtyarishillview, ky · Apr 27, 2015#23
I think I remember reading you could flash the ECM to the VIN on my car for 50? If that's the case I'd definitely want to do that.
CTScottThread starterUSA, CT · Apr 28, 2015#24
Originally Posted by Astroman ↑
How much is the full swap kit again? Auto to manual.

$200 + shipping. This kit is just missing the narrower brake pedal.
CTScottThread starterUSA, CT · Apr 28, 2015#25
Originally Posted by 07dirtyaris ↑
I think I remember reading you could flash the ECM to the VIN on my car for 50? If that's the case I'd definitely want to do that.

Yes. I can reflash the VIN into the ECM. I don't have an MT ECM on hand, but they can typically be found for under $50.
07dirtyarishillview, ky · Apr 28, 2015#26
Consider it sold! I'll PM you when I get off work later today
CTScottThread starterUSA, CT · Jun 8, 2015#27
Both kits are now sold.