Yarisworld Archive

Wilwood brake kit now available***

33 posts · 7,481 views

Replies 32

AstromanWenatchee, WA · Dec 17, 2013#2
mmmm car porn
junorico24Sydney · Dec 17, 2013#3
Are these for the rears?
WeeYariGeorgetown, Ontario, Canada · Dec 17, 2013#4
^ No
ViperoniBrampton, ON · Dec 17, 2013#5
Good price! Make it happen people!
cali yarisThread starterCanoga Park, CA · Dec 17, 2013#6
This is a FRONT brake kit. The rear kit I carry is made by RunStop.
1.5Tampa · Dec 17, 2013#7
that looks beautiful I want so bad
Jason@SportsCarDebary, FL · Dec 17, 2013#8
Now you can get to work on phase two, the two-piece rotor upgrade. 😲

Picture not included in this copy
xnamerxxso cal · Dec 17, 2013#9
Guess the guy at SEMA wasn't completely full of $h1t and they actually made something.
WeeYariGeorgetown, Ontario, Canada · Dec 17, 2013#10
In the picture of Garm's kit, what is the purpose of the 5th hole on the disc hub face?
CTScottUSA, CT · Dec 17, 2013#11
Originally Posted by WeeYari ↑
In the picture of Garm's kit, what is the purpose of the 5th hole on the disc hub face?
For screwing a bolt into to pop the rotor loose when removing.
cali yarisThread starterCanoga Park, CA · Dec 17, 2013#12
2-piece rotor is in the works, according to them. Meanwhile, who wants the "only" one?
1.5Tampa · Dec 17, 2013#13
sponsor me lol
cali yarisThread starterCanoga Park, CA · Dec 17, 2013#14
I already adopted you. I can't sponsor you now. 😛
1.5Tampa · Dec 17, 2013#15
hahah conflict of interest lol
cali yarisThread starterCanoga Park, CA · Dec 17, 2013#16
That's correct... son.

meanwhile...
ilikericesavannah, ga · Dec 18, 2013#17
I hate you.. You are making my life really difficult garm...... really difficult
WeeYariGeorgetown, Ontario, Canada · Dec 18, 2013#18
Originally Posted by CTScott ↑
For screwing a bolt into to pop the rotor loose when removing.
That's what I figured. Just found it odd that the hole was countersunk, and, no matter how closely I looked at photos in the store, could not see evidence of threads.
Jason@SportsCarDebary, FL · Dec 18, 2013#19
Originally Posted by WeeYari ↑
In the picture of Garm's kit, what is the purpose of the 5th hole on the disc hub face?
A number of Honda/Mazda/other applications still use one or more screws to locate the rotor on the hub. 🤷 The rotor used in this kit is likely based on (or is) the same as a number of other 4-100 Wilwood applications, so the hole is in place.

Picture not included in this copy
cali yarisThread starterCanoga Park, CA · Dec 18, 2013#20
Yes, I think it's a rotor for another car, machined for the Yaris application. The beveled hole is not threaded.
UberSilverAlameda,Ca. · Dec 18, 2013#21
Any clearance issues? Need to run larger wheels?🙂


Originally Posted by cali yaris ↑
The Wilwood brake kit discussed in another thread is now available and I have a kit in stock!

here's the link:
http://shop.microimageonline.com/Wil...FB-bbk-ww1.htm

Picture not included in this copy
cali yarisThread starterCanoga Park, CA · Dec 18, 2013#22
They should fit *most* 15" wheels. Older designs like Enkei RPF1's may present problems because of narrow barrels. Newer designs like SSR, Volk Racing or Wedsport present no problems.

I will try and get a PDF template for anyone wanting to test with their wheels.
fnkngrvIn The Hotbox · Dec 18, 2013#23
I would like a copy of the template. My current OEM calipers with the slotted rotors that I bought from Scott didn't seem to do badly decelerating from the 147, but it will be interesting to see how well they do from 175+.
CrankyOldManWest Michigan · Dec 18, 2013#24
Are the pads not included? All I see is the pots...
wildmongoose26Dallas, TX · Dec 18, 2013#25
I think this is the first production kit him and I talked about. I was out of the country for almost 2 weeks for work and wasnt able to really do much about the kit.
Kinda disappointing actually....
cali yarisThread starterCanoga Park, CA · Dec 18, 2013#26
Cranky the pads are included, I forgot to take a picture of them. I'll add it to the site tomorrow.

mongoose, care to share more detail? Seemed like a positive new contribution to the Yaris community to me.
wildmongoose26Dallas, TX · Dec 18, 2013#27
Well, if you contacted who I think you did, the kit you have on hand was the kit that he was working on to send to me, but due to traveling I wasnt really able to stay in that close of contact with him.

And I agree its a positive contribution, that's why I initiated it with fast brakes in the first place.
MUSKOKA800Chatham, Ontario, Canada · Dec 23, 2013#28
Originally Posted by cali yaris ↑
They should fit *most* 15" wheels. Older designs like Enkei RPF1's may present problems because of narrow barrels. Newer designs like SSR, Volk Racing or Wedsport present no problems.

I will try and get a PDF template for anyone wanting to test with their wheels.
I would like the template to test the OEM alloys and 14" steelies. Surely no issue for the 18" TRD's.
cali yarisThread starterCanoga Park, CA · Dec 24, 2013#29
might be a few days before I can set some time for this, the holidays are getting in my way right now. 😆
AznGoukiCalgary · Aug 5, 2014#30
Just came across this. Anybody have this kit? I have 15" rpf1 so I would like to know the clearance.
IllusionXBrossard, QC · Aug 5, 2014#31
Originally Posted by AznGouki ↑
Just came across this. Anybody have this kit? I have 15" rpf1 so I would like to know the clearance.

I think you need 17" wheels to clear this big disk brake kit.


Edit: just read that Garm said they should fit 15". But might not fit the rpf1
mr_milesPortland, OR · Aug 6, 2014#32
These would clear my massive rotiforms lol. Someone sponsor me puh-leeeaaase 😁

♡
cali yarisThread starterCanoga Park, CA · Aug 6, 2014#33
They will clear most 16" wheels, or a 15" wheel like the PF01, which has a larger barrel design behind the face.

The 11.7" kit won't clear your 15" Enkeis BUT, I can make you an 11" kit that will.

PM me or email me at mcroimg@gmail.com for more information.