evo165Original post*tIny dOts iN AsiA* · Nov 26, 2013#1Hi all,
Ever since mid of this year, i felt my AC is getting worst... 👎
From very cooling to moderate coolness & somehow i need to turn the AC fan knob up by 1 speed to feel the air.
Tried the below steps:
1. Top up AC gas. Improve just a little.
2. Replace radiator fan motor as it seem like the turning speed is weaker than before. Improve just a little.
The 2 steps above only last me for 3 months and the AC is back to square one. Decided to bite the bullet and go for AC evaporator/cooling coil replacement. (Required huge job of removing the entire dash board panel)
I am glad I did that... Have a look below on the 6 1/2 years old of evaporator with 99, 500km mileage. Please be aware that my local weather is summer all year round, Singapore 🤘
The evaporator have the moldy jelly alike blocking 3/4 of the entire evaporator. This causes the blockage of air going through it and also affect the purpose of evaporator task. 😁
Now, my AC cooling is so effective and powerful with just the AC speed knob no.1 👍👍👍
2 attachments not included in this copy
Replies 8
IllusionXBrossard, QC · Nov 26, 2013#2eww.. that's totally nasty
but i think you would've prevent that by letting the evap dry up before shutting down.
evo165Thread starter*tIny dOts iN AsiA* · Nov 26, 2013#3 Originally Posted by
IllusionX ↑ eww.. that's totally nasty
but i think you would've prevent that by letting the evap dry up before shutting down.
What do you mean to wait for evap to dry up before shutting off the AC/car? 😁
In fact there is a pipe connected from the evap box to external for excess of vapor water...
How long to wait to make sure the evap is dry? As you should know, we will not be able to see it without removing the dash panel & the evap box...🙄
IllusionXBrossard, QC · Nov 26, 2013#4It might be hard in your area.. but i turn off the AC and let the fan blow until all the ducts are dry when i get off the highway.. (there is still a while before i arrive home)
I take this is not a good suggestion lol. Might as well leave it like this, and continue using it the way you were before.
I wonder how mine looks like.
evo165Thread starter*tIny dOts iN AsiA* · Nov 27, 2013#5 Originally Posted by
IllusionX ↑ It might be hard in your area.. but i turn off the AC and let the fan blow until all the ducts are dry when i get off the highway.. (there is still a while before i arrive home)
I take this is not a good suggestion lol. Might as well leave it like this, and continue using it the way you were before.
I wonder how mine looks like.
😁 Instead of waiting up to 7 years to replace the evap... I might do it in every 3 years...😆
CTScottUSA, CT · Nov 27, 2013#6I think it may be worthwhile to coat the evaporator with some form of a paint/coating designed for radiators. I think that the rough surface of the bare aluminum is the majority of the problem with the evaporators getting nasty. I have not seen one with mold like that, but the couple that I have had apart here in the US have all had a black coating on them that smelled very musty.
evo165Thread starter*tIny dOts iN AsiA* · Nov 28, 2013#7 Originally Posted by
CTScott ↑ I think it may be worthwhile to coat the evaporator with some form of a paint/coating designed for radiators. I think that the rough surface of the bare aluminum is the majority of the problem with the evaporators getting nasty. I have not seen one with mold like that, but the couple that I have had apart here in the US have all had a black coating on them that smelled very musty.
Thanks CTScott for your advice on coating.... 👍
Will do the coating on next Evap change.😁
tiiamsDexter, NM · Aug 28, 2022#8Any easy way to remove the evap coil other than removing the hole dash apart. And how long does it normal take to replace a evap coil, not looking forward to this project.
sh0rtlifepacific north WET · Aug 28, 2022#9 Originally Posted by
tiiams ↑ Any easy way to remove the evap coil other than removing the hole dash apart. And how long does it normal take to replace a evap coil, not looking forward to this project.
have a look at this...while its a total install of a new system it will walk you thru the R/R of the dash..and no there is no easy way out
2007 ac swap, will update untill finished/solved