Yarisworld Archive

Went to the Drag Strip and this happened

16 posts · 8,558 views

Ryze268Original postAntigua & Barbuda · Nov 11, 2013#1
Picture not included in this copy

This is from my 1300cc Automatic Vitz

I feel great that I won but how do I improve this time? Everything is stock at the moment 👎

Replies 15

tooterLos Angeles · Nov 12, 2013#2
71+ mph in the 1/4 is good for a 1300cc auto! 👍

As far as faster, if the 1.216 is your reaction time, you could try anticipating the green light to reduce that time. Even if you could cut that time in half, 6 tenths of a second is a lot of time to cut off your quarter without needing your car to be any faster than it is right now.

Removing any excess weight for your drag runs, like the spare tire and jack, would help. On a little light car, any removed weight will make it faster. You could also pump up your rear tires to 45 psi to lower their rolling resistance. Also run with all of your windows up and vents closed to lower the wind resistance. All these little refinements can really add up. 🙂

Greg
Ryze268Thread starterAntigua & Barbuda · Nov 12, 2013#3
Originally Posted by tooter ↑
71+ mph in the 1/4 is good for a 1300cc auto! 👍

As far as faster, if the 1.216 is your reaction time, you could try anticipating the green light to reduce that time. Even if you could cut that time in half, 6 tenths of a second is a lot of time to cut off your quarter without needing your car to be any faster than it is right now.

Removing any excess weight for your drag runs, like the spare tire and jack, would help. On a little light car, any removed weight will make it faster. You could also pump up your rear tires to 45 psi to lower their rolling resistance. Also run with all of your windows up and vents closed to lower the wind resistance. All these little refinements can really add up. 🙂

Greg
Thanks a lot for the kind words, I'll give all this a try and let you know of the improvements
cali yarisCanoga Park, CA · Nov 12, 2013#4
And, you beat the Civic. 🙂

Even if you could cut that time in half,
That would make it nearly perfect. (.5 sec is built into that number) Difficult, but possible.

How many passes did you get?
Ryze268Thread starterAntigua & Barbuda · Nov 12, 2013#5
Originally Posted by cali yaris ↑
And, you beat the Civic. 🙂



That would make it nearly perfect. (.5 sec is built into that number) Difficult, but possible.

How many passes did you get?
It was my first and only pass, do you know if 06 Yaris headers would fit in my Vitz?
cali yarisCanoga Park, CA · Nov 12, 2013#6
^ that's a 2NZ-FE motor right?
Ryze268Thread starterAntigua & Barbuda · Nov 12, 2013#7
Originally Posted by cali yaris ↑
^ that's a 2NZ-FE motor right?
Indeed it is
ilikericesavannah, ga · Nov 12, 2013#8
what civic were you running against? unrelated, but curious.
Ryze268Thread starterAntigua & Barbuda · Nov 13, 2013#9
Originally Posted by cali yaris ↑
^ that's a 2NZ-FE motor right?
Originally Posted by ilikerice ↑
what civic were you running against? unrelated, but curious.
I think it was a US spec EG with a B15B VTEC Engine (obviously there was something wrong with it)
cali yarisCanoga Park, CA · Nov 13, 2013#10
We don't have a bolt-on header for the 2NZ-FE. We *think* the 1NZ header will fit the head, but I don't know about clearance or alignment with the exhaust.
ilikericesavannah, ga · Nov 13, 2013#11
Originally Posted by Ryze268 ↑
I think it was a US spec EG with a B15B VTEC Engine (obviously there was something wrong with it)
Vtec must not have kicked in 🙄
Ryze268Thread starterAntigua & Barbuda · Nov 14, 2013#12
Originally Posted by cali yaris ↑
We don't have a bolt-on header for the 2NZ-FE. We *think* the 1NZ header will fit the head, but I don't know about clearance or alignment with the exhaust.
Yes it should bolt up the same, I'll take a pic of the stock setup when I get a chance

Originally Posted by ilikerice ↑
Vtec must not have kicked in 🙄
lol seems like it
RJayHolland · Jan 15, 2014#13
As said before indeed remove everything that does not have to be in your car for it to run (I know people who take jerrycans and a fuel syphon with them to remove those extra kg's of fuel) and buy 2 sticky tires for the driven wheels whilst inflating the undriven wheels.
If you really want to go nuts on tires try and see if you can find the skinnyest rubber out there for the rear wheel..... But be carefull under breaking!

All things you can do before working on your actual -car-

And something to ponder about is that higher tire walls will give you higher top speed, but lower tire walls will convey a bit more torque to the asphalt :) Lower pressure in the driven tires will also stop wheel spin off the line to a point because the sidewall can work a bit more before the contact surface slips.

And another thing, once you're on the line with your car all warmed up, turn the heater on -full-. It will suck out all the hot air from the engine bay. It's what we did back in the bmw E30 cup.
tk-421Dagobah · Jan 15, 2014#14
Take out the rear seat. It's only 4 bolts and it takes 10 mins. You will feel a difference for sure. 👍
ezhacker1San Francisco · Jan 16, 2014#15
Unless im reading the sheet wrong, that Civic only topped out at 62mph?
JimKellyfanthe good Carolina · Jan 31, 2014#16
Originally Posted by ezhacker1 ↑
Unless im reading the sheet wrong, that Civic only topped out at 62mph?
62.15
blazingly slow for a Honda product

agreed on reaction time, get that down
how is cold air supply ?
have a K & N or something of the like ?