harda toenailOriginal postSE Missouri · Sep 11, 2013#1Hey guys I have a 08 yaris with 60/40 split back seats. They side forward and fold completely flat and i can cover them with the plastic protector pieces.
My dad just bought a 07 with non 60/40 back seats. When he folds it down it doesn't come close to folding flat. And they don't slide up. Also the plastic pieces don't lay down on the seat well at all. He wanted to use it as a work car instead of driving his v10 cargo van. But he can't situate his toolbox in the back right because he can't get the flat surface.
Is this just something you have to live with in the non 60/40 yaris hatchbacks or is there a way to make it flatten? My mom's is a single back seat too but I never messed with folding it down.
Replies 12
yarisugiハワイ · Sep 11, 2013#2You are correct. Non-60/40 seats do not fold flat.
Your dad bought the cheap-ass model Yaris like I did.
He must live with it or trade/sell it. 🙂
CTScottUSA, CT · Sep 11, 2013#3You can actually swap the bench with a 60/40 (as I did with my red one), if you can track one down (someone on here had one for sale for quite some time without interest).
There are two missing threaded inserts on a bench seat car. That is the one challenge to doing the swap.
Bluevitz-rsOshawa, Ontario, Canada · Sep 12, 2013#4why doesn't he just remove the bottom seat cushion to give the back more room to fold?
justjesusOrange County · Sep 12, 2013#5Like CTScott said, finding one isn't easy, but they are out there. (I wonder how much Toyota sells them for?)
Or kind of like Bluevitz said, but going even further, remove the entire seat. Some guy did a neat setup involving removal of the backrest and lower seat cushion, and utilized the lower frame to make a flat piece. He needed the room for his equipment. His thread is on here somewhere....just gotta look.
GolddeenohColumbia, SC · Sep 12, 2013#6or do what i did for a while, since i wasn't using the rear seats, i took them out. might solve the problem until he can find a replacement seat.
harda toenailThread starterSE Missouri · Sep 13, 2013#7I'll mention to him that he may want to just take the back seats out. Thanks for the replies guys. Just wanted to be sure we weren't missing anything
rcvminiVancouver BC · Sep 21, 2013#8I just got a 2009 woth 40/60 seats and they don't fold down flat either? I don't think they slide forward because they seem mounted without sliders
CTScottUSA, CT · Sep 21, 2013#9 Originally Posted by
rcvmini ↑ I just got a 2009 woth 40/60 seats and they don't fold down flat either? I don't think they slide forward because they seem mounted without sliders
There are two levers on the back of the rear seats. One allows you to slide the seat forward and the other folds the seat. To lay the 60/40 flat you first have to slide them forward. The base of the front is mounted rigidly, so the sliders are just under the rear portion (you can see back of the sliders if you lift the cover over the spare tire).
RevssonSoutheast Wisconsin · Sep 21, 2013#10Also, make sure you don't have anything on the floor behind the front seats. When
they fold down, it will smash into anything down there. I have to remember that
from time to time. Other than that, I love that they fold down flat compared to by
buddy's 2007 with non-split seats.
harda toenailThread starterSE Missouri · Sep 21, 2013#11Ya I slide mine all the way forward then they fold completely flat. Looks so nice :). I have to move my driver seat up until I fold them down then I can move the driver seat back again.
rcvminiVancouver BC · Sep 23, 2013#12 Originally Posted by
CTScott ↑ There are two levers on the back of the rear seats. One allows you to slide the seat forward and the other folds the seat. To lay the 60/40 flat you first have to slide them forward. The base of the front is mounted rigidly, so the sliders are just under the rear portion (you can see back of the sliders if you lift the cover over the spare tire).
Thanks for the tip, I even went and looked at a `how to` on youtube. It seems my seats will fold down but they are completely missing the second leaver to slide the seats (only one leaver on each seat to fold down).
Odd I thought all 60/40 seats could slide.
Not a big deal as I was still able to fit our new dining table top from ikea into the back and just able to close the hatch this weekend! 👍
After driving an austin mini for so long the yaris feels so big to me like a mini-van! 👍
EDIT: Just looked in the manual and it seems mine is an 'option B' so it doesn't slide forward if I had the 'option a' it would
CTScottUSA, CT · Sep 23, 2013#13 Originally Posted by
rcvmini ↑ Thanks for the tip, I even went and looked at a `how to` on youtube. It seems my seats will fold down but they are completely missing the second leaver to slide the seats (only one leaver on each seat to fold down).
Odd I thought all 60/40 seats could slide.
Not a big deal as I was still able to fit our new dining table top from ikea into the back and just able to close the hatch this weekend! 👍
After driving an austin mini for so long the yaris feels so big to me like a mini-van! 👍
EDIT: Just looked in the manual and it seems mine is an 'option B' so it doesn't slide forward if I had the 'option a' it would
That is wild. I have never seen the 60/40 fold only version. That must have been a Canada only option.