Yarisworld Archive

Underdrive Pulley + Blitz

6 posts · 3,413 views

47_MasoN_47Original postNorthwest Alabama · Aug 21, 2013#1
It just occurred to me to ask.. Since I have one of the old NST 10% underdrive pulleys installed, am I also underdriving my Blitz? Would I be better off getting one of the MI OEM sized pulleys to swap in?

Replies 5

CTScottUSA, CT · Aug 21, 2013#2
Do you have a boost gauge, as that would let you see any effect from the underdrive. The Blitz seems to be internally limited to 6 psi, so the only effect you would see is the boost being developed 10% later.
47_MasoN_47Thread starterNorthwest Alabama · Aug 21, 2013#3
Boost gauge usually shows about .7kpa

So it would just delay the boost slightly rather than giving me 10% less boost? That makes sense actually.
cali yarisCanoga Park, CA · Aug 21, 2013#4
You are getting less boost, and later. You're S/C pulley is now turning more slowly at all times than it would with an OEM sized pulley. 10% is the diameter. You'd probably have to do some wicked math to convert that to the difference in rpm's.

You should get the MI pulley and enjoy full on-demand boost AND lighter weight with your s/c.

Scott, how is the blitz blower limited to 6psi? I'm unfamiliar with the inner workings I have to admit. We know of at least one user who had a fixed underdrive pulley made for the Blitz, and another had an overdrive crank made for it. Both increased horsepower.
CTScottUSA, CT · Aug 21, 2013#5
Originally Posted by cali yaris ↑
You are getting less boost, and later. You're S/C pulley is now turning more slowly at all times than it would with an OEM sized pulley. 10% is the diameter. You'd probably have to do some wicked math to convert that to the difference in rpm's.

You should get the MI pulley and enjoy full on-demand boost AND lighter weight with your s/c.

Scott, how is the blitz blower limited to 6psi? I'm unfamiliar with the inner workings I have to admit. We know of at least one user who had a fixed underdrive pulley made for the Blitz, and another had an overdrive crank made for it. Both increased horsepower.
I have no idea as to how it is limited, but once it gets to 6 psi the boost gauge never climbs any further. It may be some type of internal wastegate or it may just be something to do with how the paddles work.
47_MasoN_47Thread starterNorthwest Alabama · Aug 21, 2013#6
I'll have to snag one of those MI pulleys. Ugh at having to redo those freaking belts again, lol.