vaironlOriginal post-- · Aug 16, 2013#1Hello Everone,
After debadging the yaris and opening the dash panel to fix the power outlet, I felt the greatness of fixing and bonding with the car. Now I want more...
Because of my financial situation I will only be able to buy 1 product in the next couple of months. I was thinking about something I can learn myself and can hopefully get nice performance or visuals out of. I was thinking air intake, exhaust tip (my state doesn't allowd these, but a silent one shouldn't be a problem). I'm not looking to go all crazy, but rather make my car look like its "mine".
I'm hoping to stay around $100, for this mod. I will shell out more depending on which part it is, but it will take me more time to buy 🙁.
Please I'd you have any ideas post them here, think I should just wait and save more? Anything counts.
Replies 34
djhuddy2442pittsburgh pa · Aug 17, 2013#2well for performance you may need to save up some Garm will be able to help you with that but for visual you need to take a look at PlastiDip its a very easy way to make your car your own...
heres mine done a little with it
https://www.facebook.com/photo.php?f...size=960%2C291 MadMaxSan Antonio, Texas! · Aug 17, 2013#3I wasn't aware that exhaust tips were illegal in VA, but I bought a large one at Walmart for fifteen bucks and it looks a heckuva lot better than the stock pipe just sticking out there...
Picture not included in this copy
It was one of the first mods I did to Sprocket.
And yes, that is snow in San Antonio. Happens about one every ten years or so... 👍
Cheers! M2
vaironlThread starter-- · Aug 17, 2013#4 Originally Posted by
MadMax ↑ I wasn't aware that exhaust tips were illegal in VA, but I bought a large one at Walmart for fifteen bucks and it looks a heckuva lot better than the stock pipe just sticking out there...
Picture not included in this copy
It was one of the first mods I did to Sprocket.
And yes, that is snow in San Antonio. Happens about one every ten years or so... 👍
Cheers! M2
I actually was seeing that exhaust tip might be a good small mod to do until I can save some bucks for the ones at micro image. Do you have any recommendations for a liftback 2010? hopefully not silent but not annoyingly loud?
vaironlThread starter-- · Aug 17, 2013#5 Originally Posted by
djhuddy2442 ↑ well for performance you may need to save up some Garm will be able to help you with that but for visual you need to take a look at PlastiDip its a very easy way to make your car your own...
heres mine done a little with it
https://www.facebook.com/photo.php?f...size=960%2C291
I heard a couple of comments from people saying to avoid plastiDip on the car itself. Do you risk the paint coming off or something?
cali yarisCanoga Park, CA · Aug 17, 2013#6An exhaust tip alone doesn't change the sound or the performance of the car. A bolt-on axle-back exhaust (two bolts, right in front of the passenger rear wheel) will open up a few horsepower, but they are louder than the stock exhaust system.
vaironlThread starter-- · Aug 17, 2013#7 Originally Posted by
cali yaris ↑ An exhaust tip alone doesn't change the sound or the performance of the car. A bolt-on axle-back exhaust (two bolts, right in front of the passenger rear wheel) will open up a few horsepower, but they are louder than the stock exhaust system.
Oh noes, ricer mod?
I had a guess that an exhaust tip probably just adds visuals and sound. Guess its better to wait for axleback itself.
UberSilverAlameda,Ca. · Aug 17, 2013#8My vote is for a rear SwayBar.👍
Originally Posted by
vaironl ↑ Hello Everone,
After debadging the yaris and opening the dash panel to fix the power outlet, I felt the greatness of fixing and bonding with the car. Now I want more...
Because of my financial situation I will only be able to buy 1 product in the next couple of months. I was thinking about something I can learn myself and can hopefully get nice performance or visuals out of. I was thinking air intake, exhaust tip (my state doesn't allowd these, but a silent one shouldn't be a problem). I'm not looking to go all crazy, but rather make my car look like its "mine".
I'm hoping to stay around $100, for this mod. I will shell out more depending on which part it is, but it will take me more time to buy 🙁.
Please I'd you have any ideas post them here, think I should just wait and save more? Anything counts.
CrankyOldManWest Michigan · Aug 17, 2013#9 Originally Posted by
UberSilver ↑ My vote is for a rear SwayBar.👍
This. You can install it in about 15 minutes if you have access to a car lift. If not, your stock jack can get you up on jackstands. A pair of 14mm wrenches (and/or sockets) is all you need for the bolts.
vaironlThread starter-- · Aug 17, 2013#10 Originally Posted by
CrankyOldMan ↑ This. You can install it in about 15 minutes if you have access to a car lift. If not, your stock jack can get you up on jackstands. A pair of 14mm wrenches (and/or sockets) is all you need for the bolts.
Does it only give handling performance? I'm completely new to car concepts, did a quick search and to my understanding sway bars help to stop sway on corners?
MadMaxSan Antonio, Texas! · Aug 17, 2013#11 Originally Posted by
cali yaris ↑ An exhaust tip alone doesn't change the sound or the performance of the car. A bolt-on axle-back exhaust (two bolts, right in front of the passenger rear wheel) will open up a few horsepower, but they are louder than the stock exhaust system.
Actually, I've had several Yaris owners comment that this tip does change the sound of the exhaust slightly. I don't know why, but I hear it as well.
Maybe it somehow distorts the gases as they exit the pipe, I don't know; but there is a difference.
Still, I did it more for looks. It is a nice improvement at the back of the car! 🤘
tk-421Dagobah · Aug 17, 2013#12 Originally Posted by
UberSilver ↑ My vote is for a rear SwayBar.👍
A big +1 on this one! 👍
You can find other ideas on the Best/Worst Investments thread (check my sig).
UberSilverAlameda,Ca. · Aug 18, 2013#13 Originally Posted by
CrankyOldMan ↑ This. You can install it in about 15 minutes if you have access to a car lift. If not, your stock jack can get you up on jackstands. A pair of 14mm wrenches (and/or sockets) is all you need for the bolts.
I did not need to lift the car when I installed my WhiteLine sway.
junorico24Sydney · Aug 18, 2013#14Cheapest and quite mods.
Light weight pulley and the sway bar.😁
hatcbackSydney · Aug 18, 2013#15Looks nice mate
vaironlThread starter-- · Aug 18, 2013#16 Originally Posted by
tk-421 ↑ A big +1 on this one! 👍
You can find other ideas on the Best/Worst Investments thread (check my sig).
Actually now that I think about it the short shifter and sway bar are needed mods.
The NST short shifter is what I will save up for due to its low price and simple installation.
FootPalm bay,Fl. · Aug 18, 2013#17Going to add I did not lift my car for the rear sway either.
tooterLos Angeles · Aug 18, 2013#18 Originally Posted by
vaironl ↑ Actually now that I think about it the short shifter and sway bar are needed mods.
The NST short shifter is what I will save up for due to its low price and simple installation.
A relatively inexpensive and easy to install mod is a shift knob. Since your hand is on it so much when driving it changes the feel of the car quite a bit. 🙂
Picture not included in this copy tooterLos Angeles · Aug 18, 2013#19 Originally Posted by
Foot ↑ Going to add I did not lift my car for the rear sway either.
Yeah, it's not really necessary. The rear sway bar was one of my first mods and definitely among the best. 🙂
I especially like the TRD rear sway bar as the fit is superb, and
nothing hangs down below the suspension. 👍
Picture not included in this copy MUSKOKA800Chatham, Ontario, Canada · Aug 19, 2013#20Top two upgrades IMO, both however nearly invisible.
-Rear anti-sway bar (much improved and safer driving experience)
-Shift kit (if you're in a manual)
vaironlThread starter-- · Aug 19, 2013#21 Originally Posted by
MUSKOKA800 ↑ Top two upgrades IMO, both however nearly invisible.
-Rear anti-sway bar (much improved and safer driving experience)
-Shift kit (if you're in a manual)
Shift kit as in the NST shortshifter?
junorico24Sydney · Sep 4, 2013#22Go with the shifter, Sway bar and pulley. These are quiet mods!!!
Then you can graduate to the loud ass header ( dc or weapon R) air intake combo.This will make you go deaf in one ear though.
cali yarisCanoga Park, CA · Sep 4, 2013#23junorico24Sydney · Sep 4, 2013#24 Originally Posted by
cali yaris ↑
Hey Cali what's the postage charge to 2750, Sydney, NSW, Australia?
Do you have TRD sway bar i don't see it on the site.
sqcompBack at home · Sep 4, 2013#25I like the Whiteline rear sway option. It was a great upgrade for me.
cali yarisCanoga Park, CA · Sep 4, 2013#26TRD/Toyota will not sell to third party vendors, sorry about that.
www.trdsparks.com might be willing to ship internationally.
I'll get a shipping quote for you and PM you shortly.
MUSKOKA800Chatham, Ontario, Canada · Sep 6, 2013#27 Originally Posted by
MUSKOKA800 ↑ Top two upgrades IMO, both however nearly invisible.
-Rear anti-sway bar (much improved and safer driving experience)
-Shift kit (if you're in a manual)
I use both the in-cabin and engine-bay short shifters.
Super short shift throws! 👏
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Sep 8, 2013#28 Originally Posted by
tooter ↑ A relatively inexpensive and easy to install mod is a shift knob. Since your hand is on it so much when driving it changes the feel of the car quite a bit. 🙂
Picture not included in this copy
Where did you find your shift knob! Online? Is it available in other colors?
vaironlThread starter-- · Feb 6, 2014#29To everyone that follows this thread... I bought the short shifter, sway bar, air intake, and axle back exhaust. Will probably add a couple of things in the future :).
Stay tuned
malibuguyWestminster, MD · Feb 6, 2014#30A larger exhaust tip can amplify the sound coming out of a muffler by a minor amount,...but really...i do exhausts for VA cars all the time, i dont know how they get away with it.
Rear sway bar is a great mod, def right up there on the first to do list.
Micro Image shifter bushings
remove carbon trap
Thats my top 3 recomended
Originally Posted by
vaironl ↑ To everyone that follows this thread... I bought the short shifter, sway bar, air intake, and axle back exhaust. Will probably add a couple of things in the future :).
Stay tuned
Well I was going to suggest that you start with 3M paint protection Film. Better to protect what you already have an investment in and then install the other "toys". JMO....
vaironlThread starter-- · Mar 23, 2014#32 Originally Posted by
bairjo ↑ Well I was going to suggest that you start with 3M paint protection Film. Better to protect what you already have an investment in and then install the other "toys". JMO....
A little late don't you think?😆
Originally Posted by
vaironl ↑ A little late don't you think?😆
No shit...That's why I said "I was going to" I should have added "but I was to late." I guess I left myself wide open on that one
MyzticZ3r0Las Vegas, NV · Mar 24, 2014#34 Originally Posted by
bairjo ↑ Well I was going to suggest that you start with 3M paint protection Film. Better to protect what you already have an investment in and then install the other "toys". JMO....
I wish I got the film when I first got my car. In all honesty, I didn't think I'd keep my yarii after I paid it off, but I couldn't convince myself afterwards =]. Every time I clean/wax my car, I kick myself because I see all the little knicks from small debris that hit the front of my car and left marks.
Originally Posted by
MyzticZ3r0 ↑ I wish I got the film when I first got my car. In all honesty, I didn't think I'd keep my yarii after I paid it off, but I couldn't convince myself afterwards =]. Every time I clean/wax my car, I kick myself because I see all the little knicks from small debris that hit the front of my car and left marks.
I have 60,000 miles on 2010,... freeway miles which are even worse for chipping and sand blasting affects. My Yaris looks like the day i bought it. Not one blemish...
You can still do it. You can buy it by the roll or pre cut kits on ebay. I did the hood, fenders, and mirrors myself. However, i had the bumper done by a pro. When I had my 08, i tried to do the bumper myself...it was a train wreck since the bumper is loaded with different angles, seams, and is such a large pieace to handle. It's worth considering for your next mod....