Yarisworld Archive

New Seats / New Engine mods / New Suspension mods / updates (also added 201hp)

10 posts · 7,725 views

3cyltrboOriginal postOttawa · Aug 6, 2013#1
I've been working on the Yaris for a while in my free time (free time on weeknights and weekends)

Here's what I've added in this round of modifications.

-TRD Rear anti-roll bar.
-Sparco Chrono Road seats
-Sparco Sliders
-Planted Technologies seat brackets
-KEYS racing suede shift knob (mad tyte JDM yo)
-CF mirror covers
-Tooter manifold
-Corolla Throttle body ( I polished it)
-DC Sports Header
-MicroImage Red Silicone Rad hoses
-Mishimoto colder Thermostat (65?deg instead of 82?)
-Throttle body coolant bypass
-Ecliptech sequential shift light (not wired yet)
-Custom Blue valve cover
-Diehard Platinum series battery (Comes from the same factory as the odyssey Car-Audio batteries but its grey and cheaper) (yes this battery is a heavy monster but I need it for my audio pursuits)


At a local show this weekend

Picture not included in this copy

Picture not included in this copy

Seats & Planted Technology brackets

Picture not included in this copy

Mad Tyte Jdm shift knob

Picture not included in this copy


Picture not included in this copy


Picture not included in this copy


Picture not included in this copy

Picture not included in this copy

.
.
.


I also wanted some more power and luxury amenities, so rather than try to figure out how to cram them into the Yaris, I instead went out and got a 2013 Civic Si as a Daily driver.

Its staying relatively simple (Daily driver status) and so far it only has

-H&R sports springs
-Takeda Intake
-TSW Interlagos forged wheels


Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 9

TerenceCruzCali · Aug 6, 2013#2
Very nice, man!
FreestylinCalgary, Alberta · Aug 6, 2013#3
Before I clicked on the thread, I was stoked to see a 300hp Yaris! Sweet new ride though :)
3cyltrboThread starterOttawa · Aug 7, 2013#4
Originally Posted by TerenceCruz ↑
Very nice, man!
Thanks man
3cyltrboThread starterOttawa · Aug 7, 2013#5
Originally Posted by Freestylin ↑
Before I clicked on the thread, I was stoked to see a 300hp Yaris! Sweet new ride though :)
Lolz

Nope, although I am thinking on how to get more power out of it (the Yaris)

Will
D&DAustin, TX · Aug 7, 2013#6
Nice cars! What are the specs on the Yaris rims?
BEEFnorth carolina · Aug 7, 2013#7
have you done anything with the exhaust on the yaris?

I saw your other thread and wondered that there too but didn't post.

I know you have done the header but what about the rest of it?

I am very happy with the gains I have gotten on mine and all I have done (for power) is the intake, header, exhaust (not axle back), and light weight pulley.

I have done other things like springs, sway bar, short shifter (x2), and so on.

you may want to consider the exhaust as it seemed to help a lot for me. Malibuguy made mine and it is mandrel bent 2" with a glass packed muffler. I painted it with barbecue paint (black) so as not to be too showey.

Love the Si. I think 2004 was the last year of the hatchback Si. Great looking cars all around.
3cyltrboThread starterOttawa · Aug 7, 2013#8
Originally Posted by D&D ↑
Nice cars! What are the specs on the Yaris rims?
Thanks

16x6.5 (+42mm?)

I'm the exact opposite of stance / stretch / poke (which I despise)

I'm all about function, hence why I searched for a rim that was only 6.5" wide (not the usual 7") and with a proper offset to allow me to aggressively lower the car with zero clearance issues whatsover

With this "fitment" I have no fender rub / no body damage / its not wearing the wheel bearings at an accelerated rate / I haven't had to compromise the paint or the wheel wells with fender modifications etc...

And as an added bonus they are only 11.xx lbs
3cyltrboThread starterOttawa · Aug 7, 2013#9
Originally Posted by BEEF ↑
have you done anything with the exhaust on the yaris?

I saw your other thread and wondered that there too but didn't post.

I know you have done the header but what about the rest of it?
I have a full exhaust (manifold back) sitting on the floor of my garage, but I haven't installed it yet out of not knowing how loud it might be and the fact that it doesn't have a Cat.


Originally Posted by BEEF ↑

I am very happy with the gains I have gotten on mine and all I have done (for power) is the intake, header, exhaust (not axle back), and light weight pulley.

I have done other things like springs, sway bar, short shifter (x2), and so on.

you may want to consider the exhaust as it seemed to help a lot for me. Malibuguy made mine and it is mandrel bent 2" with a glass packed muffler. I painted it with barbecue paint (black) so as not to be too showey.
I've got the stuff that you mentioned, I guess the exhaust is the next thing.

I'd prefer one from Malibuy guy to the one I have now (the not installed one), but I never seemed to be able to resolve pricing / options etc. with him

Originally Posted by BEEF ↑

Love the Si. I think 2004 was the last year of the hatchback Si. Great looking cars all around.
Yup, 2004/5 was the last year of the Hatchback, that was the "EP3" (with the shifter on the dash). I had one of those from 2002-04 and I loved it.

I also had an 8th Gen (the version in between the last Hatchback and the current 9th gen) , and that was also a great car.
BEEFnorth carolina · Aug 7, 2013#10
I will say that it took him a while to get back to me on mine... a long while. it was worth the wait though.

Mine is a resonator back (state inspections are a bitch) though it makes it 2" all the way through.

I don't have the intake manifold as I can't justify the $700 garm wants for it yet (though I have tried) and I am still iffy on tooters.

you could also see if your car is getting into closed loop. that T-stat of yours is running really cold. What is that, like 160F or so? I thought for performance, you wanted to go hotter? I always heard that for performance go from a 180 to a 195 but that was years ago (damned americans and their Fahrenheit). not sure if you have a scangauge but you could check loop being open or closed using it.

The shifter on the 2004's looked way too much like a falice. I will say that they were very strong for their weight. I miss the old honda hatches. kind of the reason I got a yaris. not a big fan of the fit. I miss the low and wide honda civics of my youth...