Yarisworld Archive

AC pulley

7 posts · 5,618 views

yaris9876Original postusa · Jul 26, 2013#1
has anyone pulled the AC compressor pulley off and replaced the bearing on the 1.5 litre??
it has a strange disc with holes around the perimeter...any pics also??

Replies 6

lanemeyer14charlotte, nc · Sep 11, 2013#2
Still wondering about this myself. Anyone ever done it?
CTScottUSA, CT · Sep 11, 2013#3
Check out the following post. I pulled the pulley off one one using a home built tool:
AC pulley
lanemeyer14charlotte, nc · Sep 11, 2013#4
Originally Posted by CTScott ↑
Check out the following post. I pulled the pulley off one one using a home built tool:
AC pulley
Awesome! Thanks for the info👍
lanemeyer14charlotte, nc · Sep 13, 2013#5
Well, swapped the pulley but part of it broke when I installed it! Dammit!! Now I need just the piece in the middle that has the fins on it that fit inside the pulley itself😠
CTScottUSA, CT · Sep 13, 2013#6
Originally Posted by lanemeyer14 ↑
Well, swapped the pulley but part of it broke when I installed it! Dammit!! Now I need just the piece in the middle that has the fins on it that fit inside the pulley itself😠
This piece? If so, I might just be able to help you with that.

DSCN2546.jpg
lanemeyer14charlotte, nc · Sep 13, 2013#7
Yep, that's the piece! I didn't know the torque specs when I put it back on and cranked it down a little too tight I guess. That crappy pot metal broke right at the three points where it's really thin. I had to fight back the tears when I realized it broke, haha! If you can help me out you would be a life saver! This car is going to be for my gf and she's gotta stay cool😎