Yarisworld Archive

Finally, my motor went.

40 posts · 16,777 views

Blown_xaOriginal postVirginia · Jul 16, 2013#1
I must say, I pushed it for a long time... so this was bound to happen. I was simply driving home a few nights ago and did a full boost (30psi) pull, right at redline in 2nd gear I got valve float. I have had the rev limiter set at 7500 for about 5 months, but it was pure luck I made it that long on a stock head. I was barely able to make it home, the car barely ran.

Im hoping the bottom end is ok, and just some minor damage done to piston tops.

Garm, I noticed you carry upgraded valve springs, Ill be contacting you soon about those and a intake manifold. Also cam options, if there are any.

I was able to squeeze 60k miles out of this motor without any snags until now!

Replies 39

fnkngrvIn The Hotbox · Jul 16, 2013#2
The BC Valves come highly regarded. There is also the JUN Cam pair designed specifically for turbo applications.
cali yarisCanoga Park, CA · Jul 16, 2013#3
You did great, made us all proud with your build. We can grind cams for half what JUN charges, I would never pay their prices.
kounj · Jul 17, 2013#4
You had great numbers before and beat it up for a long time so I cant wait for your next build.
GolddeenohColumbia, SC · Jul 17, 2013#5
*Engine :P

but besides that, it is time to go crazy, you know grind some cams, up grade the valves, port and polish, all that stuff that makes more ponies 😈
Blown_xaThread starterVirginia · Jul 17, 2013#6
Regrind cams sounds fine to me. Ill do those, springs, and possible port and polish. I am interested in the golden eagle manifold, what tb flange options are there?
The SpectacleTampa, FL · Jul 17, 2013#7
Do you have a link to your build thread? I don't want to ask a bunch of questions that you have already posted answers to.

Did you do a teardown already? Interested to see what the motor internals look like.
ilikericesavannah, ga · Jul 18, 2013#8
I don't see an actual full thread build. But if you look up his name and all the threads Blown xA started, you will find alot of the answers you seek.

Link to a thread or page that is not in the archive
Blown_xaThread starterVirginia · Jul 18, 2013#9
I never made a build tread, Im weird lol
cali yarisCanoga Park, CA · Jul 18, 2013#10
I am interested in the golden eagle manifold, what tb flange options are there?
Whatever you want, it comes 1ZZ/1NZ, but we've made 1NZ cable (xA/xB) and larger (70mm) flanges as well. All available.
cali yarisCanoga Park, CA · Jul 18, 2013#11
Do I smell 10's on the horizon? 😁
Blown_xaThread starterVirginia · Jul 18, 2013#12
that is the plan yep. I need another 50-70hp, that should get me there if not very close .
YodaFL · Jul 19, 2013#13
Hey when you ran that 12.9 in your sig, what was your whp?
1.5Tampa · Jul 19, 2013#14
good news for this little guys!
Blown_xaThread starterVirginia · Jul 19, 2013#15
Originally Posted by Yoda ↑
Hey when you ran that 12.9 in your sig, what was your whp?
286whp at that time, with oem steelies. The 11.9 was with slicks and 318whp. I am currently at 352whp but haven't run it yet ( not that I could now anyays🙂 )
xnamerxxso cal · Jul 20, 2013#16
Have you popped the top see what failed yet?
Blown_xaThread starterVirginia · Jul 20, 2013#17
Originally Posted by xnamerxx ↑
Have you popped the top see what failed yet?
Ill probably do so next month, have a bore scope at the shop too. Right now, my focus is elsewhere (downhill/streetluge racing).
scioncrewHB · Jul 21, 2013#18
Originally Posted by Blown_xa ↑
I must say, I pushed it for a long time... so this was bound to happen. I was simply driving home a few nights ago and did a full boost (30psi) pull, right at redline in 2nd gear I got valve float. I have had the rev limiter set at 7500 for about 5 months, but it was pure luck I made it that long on a stock head. I was barely able to make it home, the car barely ran.

Im hoping the bottom end is ok, and just some minor damage done to piston tops.

Garm, I noticed you carry upgraded valve springs, Ill be contacting you soon about those and a intake manifold. Also cam options, if there are any.

I was able to squeeze 60k miles out of this motor without any snags until now!

I sad to hear about your motor but i think the motor has had a good life. good luck on your next build.
Blown_xaThread starterVirginia · Jul 21, 2013#19
Originally Posted by scioncrew ↑
I sad to hear about your motor but i think the motor has had a good life. good luck on your next build.
Thanks, yea the motor did have a good life. Im not too upset because I feel I got a lot out of it. Even though It has been a week, I do miss driving that car.
Flipper_1938Kentucky · Jul 21, 2013#20
When are you going to tear into it to see what needs to be fixed?
Blown_xaThread starterVirginia · Aug 24, 2013#21
I have time finally, and plan to pull the head tomorrow here at home. Ill take a few pics
GolddeenohColumbia, SC · Aug 24, 2013#22
finally i was starting to think you forgot about us. :P
fnkngrvIn The Hotbox · Aug 25, 2013#23
very curious!
Blown_xaThread starterVirginia · Aug 25, 2013#24
Originally Posted by Golddeenoh ↑
finally i was starting to think you forgot about us. :P
my focus was in another place for a while, so my xA was on the backburner. I attended a world cup downhill race a couple weeks ago, and had a good spill during a practice run. Im back to normal now after a concussion, which took a while to shake. Unrelated, but here is the video... I was on the outside of another rider and ran out of road, sherrif found me unconsciousness face down in the water. http://youtu.be/Udk_TqRY4rc

1 attachment not included in this copy

cali yarisCanoga Park, CA · Aug 25, 2013#25
😲

wow.
Blown_xaThread starterVirginia · Aug 25, 2013#26
Bent cylinder 3 intake valve. Cly 4 damage is from a detonated spark plug ( 6 months ago or so). I reported about that on here in another thread ( Ill bump it). The valve definately indented an impression on the piston, but It isnt structural damage. The damage in cylinder 4 from the spark plug ceramic floating around is rather bad. The wall is really scored, the piston top is knicked up and blasted.

My plan for now is to put another head on, with stiffer valve springs, and higher lift cams. I want to then find the structural limit of this motor (40psi?) . Instead of starting over with a fresh bottom end now and risk damaging it (because im greedy), Id rather not waste a whole new build on experimentation.

2 attachments not included in this copy

cali yarisCanoga Park, CA · Aug 26, 2013#27
Yes!
justjesusOrange County · Aug 26, 2013#28
face down in the water! DAAAAMN

glad you made it out (and 3rd place! wow)
Blown_xaThread starterVirginia · Aug 28, 2013#29
replacement head, ready to go on this weekend. Supertech valve springs installed, head decked and cleaned.

1 attachment not included in this copy

ilikericesavannah, ga · Aug 28, 2013#30
sooo shiny
JustDidItUnited States · Aug 30, 2013#31
Originally Posted by Blown_xa ↑
Unrelated, but here is the video... I was on the outside of another rider and ran out of road, sherrif found me unconsciousness face down in the water. http://youtu.be/Udk_TqRY4rc
Holy...crud! Your lucky!! Glad everything appears ok...
Blown_xaThread starterVirginia · Sep 1, 2013#32
xA is together and running !
GolddeenohColumbia, SC · Sep 2, 2013#33
pictures/video or it didn't happen. :P
Blown_xaThread starterVirginia · Sep 2, 2013#34
I drove it around last night, the valve springs alone have made a noticable improvement in power above 6600rpm. With the oem springs the car was probably experiencing valve float robbing the power. The dyno will tell the story. I was going to do more work (cams, maybe valves), but I need my car squared away and dialed in for an event coming up. However, expect a good gain because this thing is going to be tuned for some crazy boost levels .
GolddeenohColumbia, SC · Sep 2, 2013#35
Originally Posted by Blown_xa ↑
I drove it around last night, the valve springs alone have made a noticable improvement in power above 6600rpm. With the oem springs the car was probably experiencing valve float robbing the power. The dyno will tell the story. I was going to do more work (cams, maybe valves), but I need my car squared away and dialed in for an event coming up. However, expect a good gain because this thing is going to be tuned for some crazy boost levels .
you excite us too much!!
fnkngrvIn The Hotbox · Sep 3, 2013#36
I bet once next summer roles around you and I would have a bunch of fun!
Blown_xaThread starterVirginia · Sep 4, 2013#37
Originally Posted by fnkngrv ↑
I bet once next summer roles around you and I would have a bunch of fun!
yea! Id like to try the land speed thing too, maybe go with Roland (Harley streetluge guy).
fnkngrvIn The Hotbox · Sep 4, 2013#38
Originally Posted by Blown_xa ↑
yea! Id like to try the land speed thing too, maybe go with Roland (Harley streetluge guy).
If you do give me a hollar...they get pretty picky about the safety requirements and gear. A lot of folks come from other realms of racing thinking they can just use what they have, for example plating for rollcage assemblies, and get turned around.
fnkngrvIn The Hotbox · Jan 19, 2016#39
Anything ever move forward with this?

Sent from m-o-b-i-l-e
bairjoJan 19, 2016#40
Originally Posted by scioncrew ↑
I sad to hear about your motor but i think the motor has had a good life. good luck on your next build.
Is this thread about a Prius?...if not, it was an engine that failed...