Yarisworld Archive

YarisSedans Ongoing Modification Thread

15 posts · 6,295 views

YarisSedanOriginal postCalifornia - Bay Area · Jun 16, 2013#1
So I decided to start a thread to store all my mods that I currently have and on going as I have many more planned over the course of the next few months.

Current Performance and Suspension Mods

TRD Exhaust
TRD Swaybar
TRD Springs
Tokiko Shocks
Tannabe Front Strut Brace
Ultra Racing Rear Strut Brace
Megan Racing Front and Mid Lower Braces
Nonstop Tuning Pulley Set
Nitto Torque Dampener
Weapon R Electronic Throttle Controller
Konig Helium Rims

Cosmetic Mods

Carbon fiber engine cover
Carbon fiber ebrake handle
Black chrome/carbon fiber front and rear emblems
Color matched rear trunk trim (used to be chrome)
Rear trunk lip spoiler
S Body kit
Black chrome headlight tint
Rear tail light tint
Rear tail light chrome bulbs
Front Fog Lights with tint

Upcoming/waiting to be installed mods

Corolla Throttle body
powergrid swaybar links
Silicon radiator hoses

Replies 14

YarisSedanThread starterCalifornia - Bay Area · Jun 16, 2013#2
So my current mod I did for today was black chrome tint my headlights I was going to go with a strait tint film but I still wanted to retain the headlights reflectiveness from the chrome and gave it a rather unique look. It ended up coming out exactly as I envisioned.

This was the product I used it comes in a kit with the black chrome tint and clear coat

Picture not included in this copy

Same product I used in my other post for my emblems Lexus Black Pearl Emblems on the Yaris ie Black Chrome

And Here is how it looked before on the stock headlights

Picture not included in this copy

Picture not included in this copy

And after the black chrome tinting

Picture not included in this copy

And this is with the eyelids with black chrome tint
YarisSedanThread starterCalifornia - Bay Area · Jun 16, 2013#3
Picture not included in this copy

So here is a side by side comparison you can see how the light reflects of the headlight a little different than if you use just a typical headlight tint film. I went ahead and put only 2 very light coats of the tint and then 4 coats of clear coat. All the pictures I am currently posting the lenses have not been wet sanded and polished yet, I expect them to give a bit more gloss. Since they are clear coated they should be able to take a automotive paint wax to give the lenses even more of a shine as well as UV protection from fading.

When I took the headlights out I noticed there is already a factory spot to mount a HID ballast

Picture not included in this copy

So I came up with the idea of using 2 zip ties and some screws and washers to make a proper mount to hold the ballast to the headlight, I was going to use mounting tape but the ballast wasn't a perfect fit and wouldn't stay flat. With the zip ties its easy to remove and replace if my ballast ever burn out down the road so its a less permanent install.
Picture not included in this copy

Picture not included in this copy

Zip tied the wires along the factory wires for a super clean install looks almost like thast the way it came from the factory.

Since i had my eyelids off I took the time to clear coat them as well

Picture not included in this copy

And it turns out good I didnt waste my mounting tape one roll was just barely enough to do my eyelids

Picture not included in this copy
YarisSedanThread starterCalifornia - Bay Area · Jun 16, 2013#4
Here are a few more shots later in the day in the shade as well as close up

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
YarisSedanThread starterCalifornia - Bay Area · Jun 23, 2013#5
Decided to black chrome my head unit to go well with my dash this is how it looked like before

Picture not included in this copy

And this is how it turned out

Picture not included in this copy
YarisSedanThread starterCalifornia - Bay Area · Jun 23, 2013#6
Also tinted my tail lights as well today. Here is a side by side comparison

Picture not included in this copy
YarisSedanThread starterCalifornia - Bay Area · Jun 23, 2013#7
And here they are installed. I think it came out perfect. It has just enough of a toned down shade that it looks almost factory and wont attract cops.

Picture not included in this copy

Picture not included in this copy
YarisSedanThread starterCalifornia - Bay Area · Jun 23, 2013#8
I also modified my center cap I wasnt a fan of the chrome konig ones and there was nothing available in black so i decided to make my own!

Picture not included in this copy
Picture not included in this copy


First i had to remove the sticker in the center and it turns out it was covering a hole in the middle, I then fiberglased over it and sanded down the top part lip.

Picture not included in this copy

Picture not included in this copy
YarisSedanThread starterCalifornia - Bay Area · Jun 23, 2013#9
Ive been tinkering with the idea of converting to a single wiper blade since the passanger side is only a 13 and dosnt do much. I like the style and look of the wipers from the honda civic heres a comparison

Picture not included in this copy
ChiftePA · Jun 23, 2013#10
You should definitely do it, I like the single blade that comes with the '12s.
1.5Tampa · Jun 24, 2013#11
My front lip did the same thing as yours where it sags lower on one side even though the mounting points are even lol
willisjm193NC · Jun 30, 2013#12
Did you do your tail lights from the outside, or did you take them apart? I've got the same paint you have and I like the outcome on your lights.
YarisSedanThread starterCalifornia - Bay Area · Jun 30, 2013#13
I painted them from the outside
MyzticZ3r0Las Vegas, NV · Aug 17, 2013#14
Originally Posted by YarisSedan ↑
And here they are installed. I think it came out perfect. It has just enough of a toned down shade that it looks almost factory and wont attract cops.

Picture not included in this copy

Picture not included in this copy
What paint did you end up using for your taillights? VHT nightshade? I am comtemplating doing this myself.
BLOODY_STONEAlexandria , Egypt · Oct 17, 2013#15
keep up the good work ! u got a fan here