Am I to understand that there is a way to make my ecm (the cars computer) re learn my driving habits? My 2009 Yaris S is a used vehicle and I have no idea how it was driven by the previous owner. I would like to have my car react to my habits not some lead foot!!!
re-learning ecm?
9 posts · 11,782 views
Replies 8
The ECM can be made to re-learn the short term fuel trims, by simply disconnecting the negative battery terminal for a couple of minutes. As far as re-learning shifting patterns relative to your driving style - That requires resetting the automatic transmission control within the ECM via the Toyota TechStream tool. I did that on my 09 about two weeks after I installed my Blitz Supercharger and noticed that once I did so the tranny shift points seemed better relative to the extra boost from the S/C.
Can we use the same tool to create a 'sport mode' type of thing, where it will keeps the rev high?Originally Posted by CTScott ↑The ECM can be made to re-learn the short term fuel trims, by simply disconnecting the negative battery terminal for a couple of minutes. As far as re-learning shifting patterns relative to your driving style - That requires resetting the automatic transmission control within the ECM via the Toyota TechStream tool. I did that on my 09 about two weeks after I installed my Blitz Supercharger and noticed that once I did so the tranny shift points seemed better relative to the extra boost from the S/C.
To some extent yes. If you reset the ECM's tranny control and then drive it like you stole it the ECM should learn that shifting behavior.Originally Posted by caineroad ↑Can we use the same tool to create a 'sport mode' type of thing, where it will keeps the rev high?
I see... I wonder if is it possible to individually set each gear shift point using the techstream tool? or the minimum speed for cruise control?
NoOriginally Posted by caineroad ↑I see... I wonder if is it possible to individually set each gear shift point using the techstream tool? or the minimum speed for cruise control?
curious question CTScott, is it good for a manual tranny? I drive normally, but because of inconsistent fuel economy figures sometimes on a drive it like a stole it manner (some nights/highway).
I still can't figure out the best shifting points that will keep fuel economy figures high. the manual states the best shift points but they're usually on 3k rpm point. are those accurate? or should i unplug the negative terminal then drive normal 100% (or for most of the time)?
I still can't figure out the best shifting points that will keep fuel economy figures high. the manual states the best shift points but they're usually on 3k rpm point. are those accurate? or should i unplug the negative terminal then drive normal 100% (or for most of the time)?
The tranny related reset is purely for the AT. If you do a throttle body and/or MAF cleaning, doing the battery disconnect reset is a good idea to reset the fuel trims.Originally Posted by jcboy ↑curious question CTScott, is it good for a manual tranny? I drive normally, but because of inconsistent fuel economy figures sometimes on a drive it like a stole it manner (some nights/highway).
I still can't figure out the best shifting points that will keep fuel economy figures high. the manual states the best shift points but they're usually on 3k rpm point. are those accurate? or should i unplug the negative terminal then drive normal 100% (or for most of the time)?
oh i see. so i guess it's the inconsistent city traffic that i don't notice anymore (been living and driving in the city for more than a decade). sigh.
thanks a bunch scott! i wish there was a filipino version of you here. :)
thanks a bunch scott! i wish there was a filipino version of you here. :)