yaris9876Original postusa · Jun 12, 2013#1rear hub 07 hatch
I beat on these rear hubs with a wood mallet for a long time and there was NO sign
of them coming off or even loosening. Do I need a special tool to get the hubs off???
Are the front ones the same also??
I meant the brake drum...not the inner hub...its the drum thats stuck.
Replies 17
If you are trying to take the drum off you will need 2 bolts that thread into the 2 holes on the front off the drum. Screw in the bolts evenly and they will push the drum off.
I think the bolt size you need is M8x1.25 but I am not positive.
yaris9876Thread starterusa · Jun 12, 2013#5I honestly dont rememeber seeing holes in the drum.....I guess I have to take off the wheels again??
I didnt see them.
CTScottUSA, CT · Jun 12, 2013#6Here's a picture of the location of the threaded holes. Also, make sure the ebrake is off, or you will never get the drums off.

yaris9876Thread starterusa · Jun 13, 2013#7that helps....
btw is there a good pictorial of doing the front wheel bearings, not a video,just a good tutorial from someone who has done it..??
yaris9876Thread starterusa · Jun 15, 2013#8justjesusOrange County · Jun 18, 2013#9 Originally Posted by
yaris9876 ↑ that helps....
btw is there a good pictorial of doing the front wheel bearings, not a video,just a good tutorial from someone who has done it..??
I have some pics from when I did it. I didn't get pics of every step, as I got frustrated not having the proper tools.
Question: are you going to buy a new wheel bearing / hub assembly, or just a wheel bearing? I've been told to do the hub assembly as a unit. I didn't have that much at the time I did it, so I only did the wheel bearing.
I will TRY and get something going tonight.
edit: yikes. removing the pics from my windows phone isn't as easy as it was with my iPhone. damn it.
yaris9876Thread starterusa · Jun 18, 2013#10I am doing the whole hub///do you know the bolt torque on the hub bolts?? hope you get the pics up
it would help..
justjesusOrange County · Jun 19, 2013#11the hub isn't bolted to the spindle assembly. It's pressed on. For that part, I took it to a shop (Pep Boys). - If you're talking about the lugs, those too are pressed on (and should be part of the hub assembly you buy new)
I brought a blank CD to help me move the files off my phone and onto the internet. I'll be doing it little by little during the day
yaris9876Thread starterusa · Jun 19, 2013#12the rear hub assembly is bolted on to the rear axle. There are 4 bolts and I am looking at them right now. Anyone know the torque..???
justjesusOrange County · Jun 19, 2013#1367 ft lbs for the four bolts
racerbLeland, NC · Jun 19, 2013#14yaris9876Thread starterusa · Jun 19, 2013#15I got the whole assembly today... same as the pic but mine were Timken and look good. I dont have a torque wrench, is 67 pounds reachable with a regular open end wrench???
yaris9876Thread starterusa · Jun 22, 2013#16can someone verify that the hub screw holes are M8 1.25 ????
eddie054EB NJ · Jun 23, 2013#17 Originally Posted by
yaris9876 ↑ can someone verify that the hub screw holes are M8 1.25 ????
Yes, did it yesterday and got them at Home Depot.
yaris9876Thread starterusa · Jun 23, 2013#18I got into it only to realize I didnt have a 14 mm.I was going to buy one and then I called a Les Schwab
and they said 90$ if I had the parts. So they did it . It took 3 hours by an experienced brake mechanic
who needed an air chisel to get the hubs off. I would not have gotten 1/4 of the way thru it.
Glad I hired someone else.