Yarisworld Archive

Replacement of interior light bulb (New Yaris)

11 posts · 13,320 views

Geoff PeaceOriginal postWigan · Jun 10, 2013#1
I need to replace a bulb in the interior light of the new Yaris TR. (Mk.3 Yaris). There are no instructions in the handbook and I can only find guides on the internet for the Mk.1 and Mk.2 I have tried to locate locking tabs etc. without success. I do not want to pry too hard and break the plastic. It is unclear whether the outer cover detaches or the light is a complete unit. Does anyone know the correct procedure please? Photographs would be of great help if that is possible.
Regards Geoff Peace.

Replies 10

Eren_13London, UK · Jun 11, 2013#2
Hi Geoff

I've changed both the interior map reading lights and dome. Both of which I just pried on the plastic bits and they eventually do pop off. Can get you reference photos of where I pulled if you wish? Are you changing the centre lights or the ones above driver and passenger?

Eren.
Geoff PeaceThread starterWigan · Jun 11, 2013#3
Originally Posted by Eren_13 ↑
Hi Geoff

I've changed both the interior map reading lights and dome. Both of which I just pried on the plastic bits and they eventually do pop off. Can get you reference photos of where I pulled if you wish? Are you changing the centre lights or the ones above driver and passenger?

Eren.
Thankyou for your reply Eren. It is the centre light bulb I need to change, the ones over the passenger/driver, vanity lights I think they are called are OK. Photographs would be an enormous help, I am very wary of plastic parts and simply do not wish to break anything. Once again, thankyou for your help.
Regards Geoff Peace.
screenprintrNew Jersey · Jun 11, 2013#4
I hate those plastic screws or whatever they call them. now.
Eren_13London, UK · Jun 12, 2013#5
Originally Posted by Geoff Peace ↑
Thankyou for your reply Eren. It is the centre light bulb I need to change, the ones over the passenger/driver, vanity lights I think they are called are OK. Photographs would be an enormous help, I am very wary of plastic parts and simply do not wish to break anything. Once again, thankyou for your help.
Regards Geoff Peace.
You're very welcome. The centre lights I literally just pulled at the sides of the plastic cover and off it popped. Seeing as there was no help in the manual I did in fact take a risk as I wasn't sure if the whole unit would come out. I'll try and upload some photos this evening Geoff and hopefully they'll help. I don't want to suggest pulling in case it does go the opposite way for you and then it breaks but that's what I did so if you feel up to it then give it a go.
Geoff PeaceThread starterWigan · Jun 12, 2013#6
Originally Posted by Eren_13 ↑
You're very welcome. The centre lights I literally just pulled at the sides of the plastic cover and off it popped. Seeing as there was no help in the manual I did in fact take a risk as I wasn't sure if the whole unit would come out. I'll try and upload some photos this evening Geoff and hopefully they'll help. I don't want to suggest pulling in case it does go the opposite way for you and then it breaks but that's what I did so if you feel up to it then give it a go.
Thankyou for your help Erren, I will wait for your photographs before I try. Just to be on the safe side!
Regards Geoff Peace.
Geoff PeaceThread starterWigan · Jun 16, 2013#7
Originally Posted by Geoff Peace ↑
Thankyou for your help Erren, I will wait for your photographs before I try. Just to be on the safe side!
Regards Geoff Peace.
Eren 13. I wonder if you would be so kind as to post a photograph or two showing how to remove the interior light on the Mk.3 Yaris. I have tried pulling and prising but the thing does not want to cooperate. I notice there is now another thread on the same subject on the forum. If you can spare the time I would be most grateful.
Regards Geoff Peace.
Eren_13London, UK · Jun 17, 2013#8
Hi Geoff

Apologies for not replying sooner - I've been away for the weekend! I have taken one photo and I hope it's good eh ought, it's literally to show where I pulled the plastic part from.

Picture lost · i1266.photobucket.com

At the sides where the plastic looks different and looks like two clips is where I got underneath to pull out. It does feel very stiff and like it won't come off but then I moved to the front of the cover where the switches are and pulled it down that way. After a while it does loosen and come off. I was gentle with it but after a bit of perseverance it did pop off.

Hope this helps!
Geoff PeaceThread starterWigan · Jun 17, 2013#9
Originally Posted by Eren_13 ↑
Hi Geoff

Apologies for not replying sooner - I've been away for the weekend! I have taken one photo and I hope it's good eh ought, it's literally to show where I pulled the plastic part from.

Picture lost · i1266.photobucket.com

At the sides where the plastic looks different and looks like two clips is where I got underneath to pull out. It does feel very stiff and like it won't come off but then I moved to the front of the cover where the switches are and pulled it down that way. After a while it does loosen and come off. I was gentle with it but after a bit of perseverance it did pop off.

Hope this helps!
Thankyou very much for your time and trouble Eren. The light you show is exactly the same as mine, so I will follow your instructions this week. Once again many thanks.
Regards Geoff Peace.
Eren_13London, UK · Jun 18, 2013#10
Not a problem :) Hope this helps. I hope it was clear enough as I explained it. I also found a lack of instruction in the hand book when it came to changing these lights and also the map/vanity lights.

Regards!
RedRideMiddletown, NY · Jun 18, 2013#11
FWIW......

Even it it looks different due to different model years etc, they all remove the same way. :)