Yarisworld Archive

Biggest spacers?

20 posts · 5,135 views

TickleTimeTimOriginal postArkansas · Jun 5, 2013#1
What's the biggest spacers you can throw on the yaris with only adding spacers? If you wanted more than just a few mm, what would be the route from there?

Replies 19

CTScottUSA, CT · Jun 5, 2013#2
That will depend on what you are running for tires and rims. With stock sized tires and rims, 10mm would be about the limit for the fronts.
TickleTimeTimThread starterArkansas · Jun 5, 2013#3
So I take the backs have a little more play? Yeah, on stocks currently.
CTScottUSA, CT · Jun 5, 2013#4
Originally Posted by TickleTimeTim ↑
So I take the backs have a little more play? Yeah, on stocks currently.
Correct - The rear wheels are set in more than the fronts. Also, since the rears don't turn, that also helps.
cali yarisCanoga Park, CA · Jun 5, 2013#5
13mm hub spacer kit works well. You can use anything from 5mm-30mm, but you'd need a reason to do so.
Kaotic LazagnaCentral Valley, CA · Jun 5, 2013#6
I also wouldn't use anything thicker than 5 or 7mm wheel spacers unless you install some extended lug studs, otherwise, you'll only catch 3-5 threads.
TickleTimeTimThread starterArkansas · Jun 5, 2013#7
So it's worthless on stocks. I might as well wait for wider wheels then get spacers? Well I ordered my lip kit today and next is a good from Garm, wheels and spacers will have to wait til after that.
TickleTimeTimThread starterArkansas · Jun 5, 2013#8
Hood* from Garm. Autocorrect hates the word hood
TickleTimeTimThread starterArkansas · Jun 6, 2013#9
These bad boys are $100 but located 4 hours from where I live. They don't include tires. 4x100 14"

1 attachment not included in this copy

Kaotic LazagnaCentral Valley, CA · Jun 6, 2013#10
What are the specs, such as width, offset, and center bore?
TickleTimeTimThread starterArkansas · Jun 6, 2013#11
He just sold them. He didn't have it listed and sold before I could ask
TickleTimeTimThread starterArkansas · Jun 22, 2013#12
Has anyone here ever done the 2" (50mm) spacers with the studs? I'm interested to see how much that would look like a go cart
G-AmmoThe Netherlands · Jun 22, 2013#13
I had 30mm in the back.. but then I had 16x6j original toyota rims... the wheel just poked out. Also... it rubbed alot when i had people in the back, hahah... serious rubbing!!! still a cool sight though!

I now have 15x7 (ET25) and i want to do 15mm/20mm spacers in a few months...
TickleTimeTimThread starterArkansas · Jun 22, 2013#14
I was thinking at least an inch width if I was to do it with the stock 15" rims. Do you have any pictures of how it looked?
1.5Tampa · Jun 23, 2013#15
1" currently. But I have a lot of fender work done
TickleTimeTimThread starterArkansas · Jun 23, 2013#16
Notice any extra wear on your tires?
d3310nflorida · Jul 1, 2013#17
how big could i go with 17x205?
1.5Tampa · Jul 1, 2013#18
Originally Posted by TickleTimeTim ↑
Notice any extra wear on your tires?
you mean on the contact patch or sidewall?

contact patch: yes because im running -~6 camber

sidewall: depends on the wheel/tire size

the spacer alone wont cause any wear
cali yarisCanoga Park, CA · Jul 1, 2013#19
So it's worthless on stocks. I might as well wait for wider wheels then get spacers?
Not correct. Widening your track will improve handling, even on stock wheels.
cali yarisCanoga Park, CA · Jul 1, 2013#20
how big could i go with 17x205?
"17" is a wheel size, "205" is a tire size. Not enough information.

Wheels: diameter x width x offset
Tires: width x height x wheel size (diameter)