Yarisworld Archive

AEM FIC tuning tips

55 posts · 24,196 views · page 1 of 2

kouOriginal postnj · May 9, 2013#1
Thought I would start a thread so anyone who has an AEM FIC installed can share what they know.
I will start with what I have, I am running a customized Zage turbo kit running around 8psi at sea level. My car right now is running like it should from the factory I am running the z107 firmware and my injector response time is set to 810us on stock injectors and your MAF clamp should be set at 4.95v here is my tune so far as I may need to add some fuel up top but I haven't been there to find out yet,this is what it looks like in the program.

6 attachments not included in this copy

Replies 54

kouThread starternj · May 9, 2013#2
And here is some stock fuel trim info.
AFR-fuel trim
11:0-39
11:3-35
11:5-34
11:7-32
11:9-30
12:0-28
12:2-25
12:6-23
12:8-20
13:0-18
13:2-17
13:5-15
13:7-12
14:0-10
14:3-9
14:7-6
14:9-1
15:2-0
kouThread starternj · May 9, 2013#3
Originally Posted by TOLMACH ↑
WOW!!

Thanks, man
You are welcome
Focus_Sh1ftNew Jersey · May 9, 2013#4
Good information, thanks. I have nothing to contribute that you haven't already covered lol.
kouThread starternj · May 9, 2013#5
^ Thank you for earlier I put 6's in all my 0's on the fuel map and it really cleaned everything up nice after I fixed my MAF clamp.
yariSB86OH · May 9, 2013#6
If you guys right click the Fuel map window there is an option to change the fuel injector size. has anyone messed with this?

BTW Thanks Kou 🙇
kouThread starternj · May 9, 2013#7
Not me yet. But i would think you would need a tune that is working with stock injectors then it would be easier to increase the size.
yariSB86OH · May 9, 2013#8
I'm not using stock injectors. I've tried several things to get my car to idle right.

With how i have it setup now, I'm running 14.7s AFR but the car still bogs down to 500-600 rpms and stalls when the engine is warm.

I'm running the 1zz injectors, I've tried increasing and decreasing the response timing, I've tried to increase the injector size on the fuel map, I've tried negative numbers in the fuel map (reduces the amount of fuel used by injectors?), nothing i do gets the car to idle like stock...
kouThread starternj · May 9, 2013#9
I can only suggest you open a new file copy my tune put it on the FIC see how it idles then adjust for the fuel injectors. You can always go back to your original file.
yariSB86OH · May 9, 2013#10
@Kou - Thanks tons man! 🙌 🙇

Started the car, letting it warm up now. Everything looking great so far. Once its warm I'm going to drive it around for a bit. Can't wait!
kouThread starternj · May 9, 2013#11
Cool. Try it out see what happens.
yariSB86OH · May 9, 2013#12
AHHHHH!

still stalls once warm....I don't get it.
yariSB86OH · May 9, 2013#13
With the FIC and the Boomslang harness, how do i connect the bypass harness?


EDIT: This is crazy, car idles great, then out of nowhere RPMs fall below 600 and the car stalls...any ideas guys?
kouThread starternj · May 9, 2013#14
connect the bypass harness into the boomslang harness
kouThread starternj · May 9, 2013#15
did you adjust for injector size. how was it to drive with the tune I gave you? If you let it idle until its warm will it stall or is it when you are coming to a stop?
kouThread starternj · May 9, 2013#16
Do you have the stock throttle body? do you have a vacuum leak?
yariSB86OH · May 9, 2013#17
Originally Posted by kou ↑
did you adjust for injector size. how was it to drive with the tune I gave you? If you let it idle until its warm will it stall or is it when you are coming to a stop?
i did adjust for injector size, i made the number bigger (i think lol)
yariSB86OH · May 9, 2013#18
Originally Posted by kou ↑
Do you have the stock throttle body? do you have a vacuum leak?
stock throttle body yes. idk if i have a leak or not...ill have to check all my hoses tomorrow.


after the drive it is idling good in my garage. but it still stalled as i mentioned earlier.
kouThread starternj · May 9, 2013#19
There is an option to change size.
yariSB86OH · May 9, 2013#20
Just to make sure we are both on same page, when you right click in the Fuel map window, the option to change injector size is click able. Default number is 1000. The only change i did to the file you gave me was enter a new size number of 1250.

Having a vacuum leak never a cured to me. Thinking more about it, thats most likely the culprit behind my stalls. I think, if it is in fact a vacuum leak, it is because I have the boost gauge, the fic, and the bov bypass all tied into the same vacuum line. Think having all those on that one line would cause a stall? Or am i going in the totally wrong direction lol.
fnkngrvIn The Hotbox · May 9, 2013#21
Originally Posted by yariSB86 ↑
Just to make sure we are both on same page, when you right click in the Fuel map window, the option to change injector size is click able. Default number is 1000. The only change i did to the file you gave me was enter a new size number of 1250.

Having a vacuum leak never a cured to me. Thinking more about it, thats most likely the culprit behind my stalls. I think, if it is in fact a vacuum leak, it is because I have the boost gauge, the fic, and the bov bypass all tied into the same vacuum line. Think having all those on that one line would cause a stall? Or am i going in the totally wrong direction lol.

your best bet is to trace all the vacuum lines that you touched/hacked/modified for your installation. one of the leading vacuum leak points is actually the one on the FIC itself so pay close attention there too. I cannot recall right off hand what you would have your size at for the 1zz injectors as also unless they were flow tested then there would actually be a range they could be in. CTScott may recall, but I can also look into it as well. I have been running the last month or so without any piggyback or management so I haven't been into the AEM software for a while. The last time that I messed with it was November I think. If you tach the motor up a few grand and let off the throttle is is settling in for a little bit at the 5-600 rpm then into a stall or does it almost stall right off?
yariSB86OH · May 9, 2013#22
It stalls right off. It is not every time however. I'll upload a video of it over the weekend. Show you what my rpms do at idle.

I'll double check all my hoses also. I bet it is from the FIC itself.
kouThread starternj · May 9, 2013#23
When you change injector size you have to put original size then the new size. 250-55ishcc for 1zz 190-200 for 1nz.
kouThread starternj · May 10, 2013#24
I am going to put my 1zz injectors in today to see if I get the same problem as you. But i am leaning more towards you have a vacuum leak somewhere.
Focus_Sh1ftNew Jersey · May 10, 2013#25
still stalls once warm
I second a vacuum leak. Especially if you used the worm gear clamps with the Zage kit. They're pretty finicky.

Have you gotten any crankshaft codes? I know that's a pretty common problem with the Boomslang, but iirc they addressed that issue.
yariSB86OH · May 10, 2013#26
only code that constantly comes back is p0335
yariSB86OH · May 10, 2013#27
bypass harness is installed. car idles great. cant get it to stall even when im trying to. gotta be something im doing wrong with the fic...
yariSB86OH · May 10, 2013#28
:) thanks man
kouThread starternj · May 10, 2013#29
Thats good you have no leaks. I installed 1zz injectors and car is running fine. It sucks you have that crankshaft positon code I think that is an issue with 07 yaris.
yariSB86OH · May 11, 2013#30
Did you adjust injector size after you installed them?
kouThread starternj · May 11, 2013#31
Yes i did with the software put in new and old injector sizes 250/200. Which will calculate the 25% difference for you.
yariSB86OH · May 11, 2013#32
Did your fuel map automatically change? And did you have to adjust any of those numbers?
kouThread starternj · May 11, 2013#33
If you are using the tune I gave you just go to change fuel injector size make the new ones 245 make the old ones 190 this should feel stock until boost. I have notice that it will lean at when really getting on it in 1st and 2nd even with 1ZZ injectors. So i will be putting in my return line for fuel and putting a adjustable fuel pressure regulator in and a bigger fuel pump.
yariSB86OH · May 13, 2013#34
So after being on duty all weekend, I drove home with the FIC bypass harness connected. The car ran like stock even in boost. Wasn't lean or rich at WOT.
kouThread starternj · May 13, 2013#35
Be careful driving like that in boost. Detonation is a killer.
ilikericesavannah, ga · May 13, 2013#36
I could have sworn there was a thread that did some investigation with the 06-08 ecu will throw that code when running the FIC. That person used a 09-11 ecu and it fixed the problem. I can't remeber where I read that
kouThread starternj · May 13, 2013#37
Originally Posted by ilikerice ↑
I could have sworn there was a thread that did some investigation with the 06-08 ecu will throw that code when running the FIC. That person used a 09-11 ecu and it fixed the problem. I can't remeber where I read that
That thread is on MicroImage the op has not been on to let us know if it worked.
He has an 07hb and having issues with the cps code so he bought an 08+ ECU to see if that would fix it. There are a lot of cases of this issue with earlier scion models.
yariSB86OH · May 13, 2013#38
Originally Posted by TOLMACH ↑
interesting boost present but still not lean?
Yes, boost present and not lean. was running slightly rich actually, around mid ~13s


Originally Posted by ilikerice View Post
I could have sworn there was a thread that did some investigation with the 06-08 ecu will throw that code when running the FIC. That person used a 09-11 ecu and it fixed the problem. I can't remeber where I read that
That thread is on MicroImage the op has not been on to let us know if it worked.
He has an 07hb and having issues with the cps code so he bought an 08+ ECU to see if that would fix it. There are a lot of cases of this issue with earlier scion models.



@kou - I was only seeing that code, p0135 i believe, while the fic was connected.

The only code ive seen since it has been bypassed is p0172 (system too RICH). And that only came up when i was boosting up to hwy speeds from 2nd-4th gears.
kouThread starternj · May 14, 2013#39
Some more info, your MAF clamp should be set at 4.95v I learnt that this is why I was leaning out up top in every gear I had it set at 4.1v which was what I was maxing out at when NA wot at the top of 5th gear.
cali yarisCanoga Park, CA · May 14, 2013#40
Yes, boost present and not lean. was running slightly rich actually, around mid ~13s
That is lean if you're in boost.
kouThread starternj · May 14, 2013#41
^+1
yariSB86OH · May 15, 2013#42
So I tried adjusting the injector size. First changed the numbers, new: 245 old: 190. That threw the fuel map off A LOT. To where the car stalled immediately.

I calculated a 25% reduction from the new:1000 and old: 1000 default. I entered 750 for new, and 695 for old. That ran ok until i revd it up and let it fall. It stalled.

So i reverted back to the original tune you gave me Kou. I went into the ignition map and changed where the car idles from 0 to -3. I revd it up again and it didnt fall. I won't know for sure how it runs seeing how im on duty until friday.

I'll be sure to let you guys know how my drive home goes.
kouThread starternj · May 15, 2013#43
Good look set your maf clamp to 4.95. I have revised my tune a few times now to get it where it needs to be. I am waiting on a friend so I can do a real street tune, its hard to drive and tune at the same time so I have to pull over change something get back on the road. I am cleaning up the top of my fuel map so its smoother.
yariSB86OH · May 16, 2013#45
Nice find with the injector site. Thanks kou!
kouThread starternj · May 17, 2013#47
I am not sure maybe you should ask ctscott. I am still waiting to see if that is a fix as someone is trying it an another forum but the have not been on the site in a while. Some have tried a variable resister on the crank wires to adjust until the crank code stops coming up,that fix would be cheaper but will take two people one to adjust and one to drive.
yariSB86OH · May 17, 2013#48
So nothing has been confirmed what causes the 07 ECU to throw the cps cel with the fic?
Bluevitz-rsOshawa, Ontario, Canada · Aug 14, 2015#49
Bumping for reference.
Bluevitz-rsOshawa, Ontario, Canada · Sep 1, 2015#50
Did anyone ever build a MAF map like in the instructional videos?

I'm having an issue where it seem to go pig rich while transitioning into open loop. But if I run all zero maps it's fine.