About 3 months ago my passengerside highbeam stopped working, I thought it was just the bulb, I install Sylvania SilverStar Ultra bulbs part #9003SU-2. And the passenger side high beam still doesnt work. any suggestions? Should i just replace the socket or the whole assembly?
High Beam Problem
10 posts · 6,724 views
Replies 9
I would double check the replacement bulb, as the silverstars are very fragile. If the bulb filament is good, then it is likely the socket (which will be visibly melted or corroded).
The bulb is in working order the socket looks burned out, any ideas on replacement sockets and the easiest way to do that?
Replacement H4 sockets are easy to come by. Most autoparts stores stock them. You will have to cut the existing one off and splice the new one on. Solder and heatshrink is the best way to do so.Originally Posted by chillmaster89 ↑The bulb is in working order the socket looks burned out, any ideas on replacement sockets and the easiest way to do that?
Thank you for your help...now to find an excuse to install foglights...
It is easier to replace the connector with the headlight removed. which requires disconnecting the top of the bumper, and hence is the perfect time to do the fog light install.Originally Posted by chillmaster89 ↑Thank you for your help...now to find an excuse to install foglights...
i'm thinking i should probably replace my sockets too. i had silverstar ultras for a couple years and they melted them pretty good! went back to regular headlight bulbs as i couldn't afford to keep replacing them every 6 months or so. fortunately, as bad as those sockets look they still work!
Can you recommend a good pair of fog lights that for the 2008 sedan non S model?Originally Posted by CTScott ↑It is easier to replace the connector with the headlight removed. which requires disconnecting the top of the bumper, and hence is the perfect time to do the fog light install.
The Micro image kit:Originally Posted by chillmaster89 ↑Can you recommend a good pair of fog lights that for the 2008 sedan non S model?
http://shop.microimageonline.com/Fog...?categoryId=-1
UPDATE: I replaced the socket and yet the passengerside high beam still does not work...any suggestions? The fuses are all in working order.