Yarisworld Archive

LOTEK Springs installed.

14 posts · 4,800 views

Wisher23Original postBay Area · May 5, 2013#1
Decided to be a guinea pig and tried these ebay springs out.
Picked them up for $80 shipped to my door.

Picture not included in this copy

They claim to be a -1.9" drop front and rear. I have no idea what the spring rates are. Here is a before pic.

Picture not included in this copy

4x4 status. Then about a 45 minutes later here is the end result

Picture not included in this copy

Another one.

Picture not included in this copy

They are just as low as my tein s-techs were. The ride is comparable. Handling is way better then stock.

Happy !

Replies 13

WeeYariGeorgetown, Ontario, Canada · May 5, 2013#2
You did 4 springs in 45 min.! 🙇

Will be interesting to see how well the powdercoat stands up.
FreestylinCalgary, Alberta · May 6, 2013#3
Nice..need to see a speedrun on the 45 minute job though.
Wisher23Thread starterBay Area · May 6, 2013#4
The rears take 5 minutes, you don't even have to take off the wheels. 15 min per a corner in the front. I've done it many times already, plus the use air tools makes it wicked fast! 🤘
marcustoronto, canada · May 7, 2013#5
did you have to take out the plastic panel and the windshield wipers.. coz its kinna hard to get to that hex nut that requires hex keys...plus the bolt around it..
cali yarisCanoga Park, CA · May 7, 2013#6
^ Not if you have a 17mm OFFSET box wrench.
1.5Tampa · May 7, 2013#7
ahhh air tools lol it takes 15 minutes just to work some of the bolts off on my fronts lol
47_MasoN_47Northwest Alabama · May 7, 2013#8
It took me nearly 12 hours to do my suspension job. About 10 trips to the hardware store trying to find a dang wrench that would remove that nut on top of the front towers.
mr_milesPortland, OR · May 7, 2013#9
Originally Posted by cali yaris ↑
^ Not if you have a 17mm OFFSET box wrench.
Offset box wrenches are the best inventions ever.
malibuguyWestminster, MD · May 7, 2013#10
Looks like the rear springs need about a 10mm spacer
Wisher23Thread starterBay Area · May 10, 2013#11
Yeah i lost the rubber pieces a few installs ago. its just metal on metal. After riding around for a few days the ride is ok. Its not as nice as my tein springs were. The teins gave a smoother ride, these feel the road alot more.
1.5Tampa · May 10, 2013#12
I agree with Malibu. I really like the low you get in the rear but it looks awkward since the front doesnt go as low.
d3310nflorida · Jul 15, 2013#13
so 2 months later how are these? can we get an update?
racerbLeland, NC · Aug 2, 2013#14
Originally Posted by cali yaris ↑
^ Not if you have a 17mm OFFSET box wrench.
You must have mighty small hands!!🙇 I had to remove all the cowl pieces just to get enough room for using the 6mm allen wrench, then again all mine are T-handle!😢 Now that I know the trick, it will be much easier next time, even still, it only took a few hours to change 2 struts/springs and 2 shocks/springs, didn't think that was too bad for an old man!!

racerb 👏