FHT_RacingOriginal postHouston, TX · Apr 30, 2013#1JUST BECAUSE I'M CURIOUS, WHO ALL IS PASSING OBD2 EMISSIONS TESTING AND BOOSTED? NO CHECK ENGINE LIGHTS?
THANKS,
ANDREW
Replies 28
fnkngrvIn The Hotbox · May 1, 2013#2First of all...lay off the all caps...please.
Not many if any folks are actually not throwing at least one code with a turbo setup while still using the stock ECU. Have heard of folks using an SC without codes. Which are you looking for info on?
FHT_RacingThread starterHouston, TX · May 1, 2013#3Apologize about the caps. We use all caps at work...
I'm just interested to see what people are doing to get rid of the O2 code if they are catless. Especially folks that are turbo WITHOUT going standalone.
Thanks,
Andrew
cali yarisCanoga Park, CA · May 1, 2013#4If your motor is tuned properly, you shouldn't have check engine lights or codes.
If you've deleted your cats, you won't pass a sniff test no matter what.
FHT_RacingThread starterHouston, TX · May 1, 2013#5We don't have sniff tests in my county if the car is OBD2. Just plug into the computer.
No check engine light/codes, it will pass :) How is everyone not getting a CEL when turbo/straight pipe/catless on stock computer?
47_MasoN_47Northwest Alabama · May 2, 2013#6I've got a Blitz, AFe intake, DC header, midpipe (cat delete), and HK axle back and I don't throw any codes. All that stuff is on a stock ECU. I'm sure it would fail emission testing but AL doesn't have any of that stuff anyway.
^^ If you have no codes and canada does not do sniff test on exhaust you will pass inspection without a cat installed. If they do sniff test you will fail if you have no cat.
FHT_RacingThread starterHouston, TX · May 2, 2013#8 Originally Posted by
47_MasoN_47 ↑ I've got a Blitz, AFe intake, DC header, midpipe (cat delete), and HK axle back and I don't throw any codes. All that stuff is on a stock ECU. I'm sure it would fail emission testing but AL doesn't have any of that stuff anyway.
So you have no catalytic converters at all between the two O2 sensors?
Thanks,
Andrew
Focus_Sh1ftNew Jersey · May 3, 2013#9 Originally Posted by
kou ↑ ^^ If you have no codes and canada does not do sniff test on exhaust you will pass inspection without a cat installed. If they do sniff test you will fail if you have no cat.
I've been wondering this for awhile, since you're 'supposedly' allowed one unready status. If you have both O2 sensors in, only the catalytic converter efficiency threshold would show up as unready...
If that's the case, I need to go get inspected. 👍
If you know someone with an OBD scanner that tells you if your emmisions ready and your in the green you should have no issues.
Originally Posted by
Focus_Sh1ft ↑ I've been wondering this for awhile, since you're 'supposedly' allowed one unready status. If you have both O2 sensors in, only the catalytic converter efficiency threshold would show up as unready...
If that's the case, I need to go get inspected. 👍
Oh and if you dont have a cat or something that looks like a cat in place you may have problems if they get the mirror out to look under the car. Take it to a private shop may be better as long as OBD is clear they might not mind as much if you have no cat.
FHT_RacingThread starterHouston, TX · May 3, 2013#12I work at Toyota and have no problem getting the car inspected as far as visual goes, but i'm looking for an answer for the CEL question...
Who is running no cats on stock ECU without a CEL? Possibly using defoulers?
Thanks,
Andrew
^^^ Yes you can run a o2 sensor extender/adapter to keep the cel off.
cali yarisCanoga Park, CA · May 3, 2013#14FHT_RacingThread starterHouston, TX · May 3, 2013#15 Originally Posted by
cali yaris ↑
I'll take it! :)
Is your turbo manifold ok compliant with AC lines? If so, I'll take one of those too!
Thanks,
Andrew
cali yarisCanoga Park, CA · May 3, 2013#16^ Yes!
And remember you owe me a bunch of interior pieces? (for money)
pimp my yarischicago · May 5, 2013#17I am going to test in the next week. First test ever after 4 years. My turbo is still attached to my lower compression built motor. I opened the wastegate and attached my k&n filter and mass air directly to my throttle body bypassing the turbo. I put back in the stock injectors and lowered my fuel pressure back to stock and dissconnected the vac line to my regulator. Also installed the fic bypass plug. I installed a converter on my car. So far I only have a evap. Emissions code because I lost the purge solinoid under the hood. I have it on order at the toyota dealer.
What a pain in the ass. Next time I will register this thing in some far away place or get a older car to build.
fnkngrvIn The Hotbox · May 5, 2013#18How many places are actually requiring this type of inspection now anyway and from what years?
cali yarisCanoga Park, CA · May 5, 2013#19California 1976 and up.
Originally Posted by
pimp my yaris ↑ I am going to test in the next week. First test ever after 4 years. My turbo is still attached to my lower compression built motor. I opened the wastegate and attached my k&n filter and mass air directly to my throttle body bypassing the turbo. I put back in the stock injectors and lowered my fuel pressure back to stock and dissconnected the vac line to my regulator. Also installed the fic bypass plug. I installed a converter on my car. So far I only have a evap. Emissions code because I lost the purge solinoid under the hood. I have it on order at the toyota dealer.
What a pain in the ass. Next time I will register this thing in some far away place or get a older car to build.
Be carefull you dont over spin that turbo with you wastgate stuck open.
Focus_Sh1ftNew Jersey · May 6, 2013#21 Originally Posted by
kou ↑ Be carefull you dont over spin that turbo with you wastgate stuck open.
Won't be a problem with it stuck open. If it were stuck closed, however... 😲
Pimp, does Illinois have visual inspection too or just OBD? It looks like you're going way overboard with prepping for inspection. What codes were you throwing with your current setup?
JerkrattFair Lawn, NJ · May 6, 2013#22havent really been reading every post but im running blitz SC, AEM FiC no cats ect ect and i pass just fine with OBD2. i throw no codes unless i use my WOT box (cuts ignition so i would hope it throws a code)
47_MasoN_47Northwest Alabama · May 7, 2013#23 Originally Posted by
FHT_Racing ↑ So you have no catalytic converters at all between the two O2 sensors?
Thanks,
Andrew
That's correct.
JerkrattFair Lawn, NJ · May 7, 2013#24Nether do I.. I have three resonators
FHT_RacingThread starterHouston, TX · May 7, 2013#25I'm guessing everyone without cats is using a defouler or has their 2nd O2 sensor spaced out from the exhaust flow then?
JerkrattFair Lawn, NJ · May 7, 2013#26I am yea
pimp my yarischicago · May 9, 2013#27Well I got all my emission parts on the car but I am still getting a po420 cat. efficiency code. My cat converter is on the pipe with clamps. I think I will need to get it welded on to eliminate all leaks. I hope that works. Also my evap. Monitor is showing incomplete. I think I will need a cold start up in order for it to test. I have added a return line with a external regulator. I hope it passes the test. Pain in the ass.
if its an $80 dollar magnaflow highflow cat like I have on mine they only keep the cel off for 6months or so.
pimp my yarischicago · May 22, 2013#29Well I finally passed my emissions test yesterday. I had to have a new cat. Converter installed to clear my p0420 code. 140$. Today I reinstalled my wideband and hooked the turbo back up. I left the factory o2 sensors attached to see if I could keep the light off with the turbo working at 12-13 psi. Before all this crap started I was running 13-1 afr with the factory o2 sensors disconnected at a steady cruise and it would richen up to 11 to 11.5 to 1 afr when at full throttle.
Now with the factory fuel trim working Im at 14-1 afr at all times except for full throttle where Im still in the 11-1 range.
This does wory me when at partial throttle and in the boost being so lean. I am not sure how this will work out in the long run. But honestly the car never ran better. It feels just like a factory turbo car. Runs perfectly, just like stock only much more power. The check engine light is off. I checked long term fuel trim and its at -18%. So the factory computer is certainly leaning out my tune from the FIC. Except at full throttle.
On a side note with the FIC hooked up previously I was never able to go over 5700rpm. I thought their was a problem with my FIC. Now with the o2 sensors hooked up. I am reaching the full 6300 redline with no problems.