Yarisworld Archive

Yaris Cattle Guard for the GhostTurd

22 posts · 11,772 views

GhostrdOriginal postUnited States · Apr 26, 2013#1
I almost hit a coyote on the way to work last fall and thought to myself, "Boy, this would spell doomsday for the GhostTurd."

I did this with the following tools: Drill, welder, chopsaw, angle grinder, plasma cutter (although you could get by with other), and of course, paint.

It is very solid, supported at 4 points. I'm new to this site but have done several fun modifications to the car to make it more comfortable and safe to drive.

If there is a lot of interest in the cattle guard, I can post some more pictures and explanations.

Replies 21

BT91Burlington, Ontario, Canada · Apr 26, 2013#2
Curious to see how it turned out. Post some pics
CTScottUSA, CT · Apr 26, 2013#3
Definitely post pics. There has been quite a bit of interest on doing something like that.
ilikericesavannah, ga · Apr 26, 2013#4
Originally Posted by Ghostrd ↑
I almost hit a coyote on the way to work last fall and thought to myself, "Boy, this would spell doomsday for the GhostTurd."

I did this with the following tools: Drill, welder, chopsaw, angle grinder, plasma cutter (although you could get by with other), and of course, paint.

It is very solid, supported at 4 points. I'm new to this site but have done several fun modifications to the car to make it more comfortable and safe to drive.

If there is a lot of interest in the cattle guard, I can post some more pictures and explanations.
Where were the first pictures? Im so angry right now!
B2FiNiTYUS · Apr 26, 2013#5
of course... post some pics!
Flipper_1938Kentucky · Apr 26, 2013#6
I hit one of those damn things in my Yaris. It broke the lower grill and cracked the bumper cover below the lower grill. I also had to replace a handful of those little push-pin retainers.

It was a lot less damage than I expected. I was running 60mph at the time.
AstromanWenatchee, WA · Apr 27, 2013#7
I hit a giant jack rabbit, this would have saved me...
GhostrdThread starterUnited States · Apr 28, 2013#8
I'd posted this in the tech section but thought it could benefit someone here. I nearly hit a coyote one morning with the Ghost Turd so this was the solution. It took about 45 hours start-to-finish and is very solid.

1 attachment not included in this copy

GhostrdThread starterUnited States · Apr 28, 2013#9
OK, pics.... How do you upload pictures when the 'Insert Image' icon wants you to point to a URL? (help...)
mazillaSan Jacinto California · Apr 28, 2013#10
Originally Posted by Ghostrd ↑
OK, pics.... How do you upload pictures when the 'Insert Image' icon wants you to point to a URL? (help...)
You can either upload to a file hosting site like Photobucket or there should be an another option to add the pic as an attachment to the thread in the "advanced" menu.

I use photobucket...
mazillaSan Jacinto California · Apr 28, 2013#11
NM, I see you figured out how to post pics. That is intense...
Black_griffin6Atlanta Georgia · Apr 28, 2013#12
Now put some big round foglights in the cattle guard and make it look like a rally car.
GhostrdThread starterUnited States · Apr 28, 2013#13
All of the bends are done with a chopsaw, welder & angle grinder. Tedious.

The trickiest part is building your grommet mounts. You have to buy slightly longer metric bolts with which to replace the bumper mounting bolts because your grommets (what you see sticking out of the plastic bumper cover) have a 1/4" base that require more bolt shank. I just used a generic holesaw & drill to get the 2nd bumper hole made (the driver side). The passenger hole is already there for your tow hookup.

If someone is really serious about building one, I can put the car back on the rack and take some pictures of the underside for the lower supports. Without solid under-support, this would only be for decoration.

3 attachments not included in this copy

MadMaxSan Antonio, Texas! · Apr 28, 2013#14
I gotta say, that's different!
mr_milesPortland, OR · Apr 28, 2013#15
Wow. That thing is intense.
ilikericesavannah, ga · Apr 28, 2013#16
I think I will be the first yaris in destruction derby with this setup... challenge accepted
CTScottUSA, CT · Apr 28, 2013#17
I am very impressed with the fabrication technique for achieving the bend. Some serious work went into that.
CrankyOldManWest Michigan · Apr 28, 2013#18
I've contemplated this once or twice, but I'm not sure how I'd go about anchoring the lower portion of it. I think I would go with mandrel bent round tubing attached to square/rectangular uprights, like on a police cruiser. Since I'm not skilled with a welder and don't have a mandrel bender, it's just going to be a pipe dream for me.

That, and there's probably some interference with pedestrian crash safety regulations. =(
AstromanWenatchee, WA · Apr 29, 2013#19
Just put some nerf padding on there and it'll pass.
mazillaSan Jacinto California · Apr 29, 2013#20
Holy shit, you cut and welded all that bend!?!

Hats off to you on that...
eTiMaGoBangkok, Thailand · Apr 29, 2013#21
hello Clarice....
B2FiNiTYUS · Apr 30, 2013#22
that is sooo cool