Yarisworld Archive

About to call Bravo Sierra

7 posts · 4,480 views

NEexpatOriginal postS.E. New England · Mar 22, 2013#1
Has anyone here had any luck adjusting their Hand/E brake by driving in reverse and braking, or hard braking?

I have tried this a couple times, no difference, at least none that I have noticed. On a Toyota forum they say you really have to slam on the brakes to get them to self adjust.

Replies 6

fnkngrvIn The Hotbox · Mar 22, 2013#2
never heard of this
bronsinnj · Mar 23, 2013#3
As a former car mechanic I saw a lot of self adjusting brakes that didnt work as advertised.
2005rsBeaverton ON · Mar 23, 2013#4
The adjusters in the rear drums adjust shoe clearance, not ebrake cable tension
bronsinnj · Mar 23, 2013#5
Originally Posted by 2005rs ↑
The adjusters in the rear drums adjust shoe clearance, not ebrake cable tension
Right.

But my point was you REALLY want to hand adjust your rear brakes at the wheel or a least check them once a year or so.
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Mar 23, 2013#6
Originally Posted by bronsin ↑
Right.

But my point was you REALLY want to hand adjust your rear brakes at the wheel or a least check them once a year or so.
👍 I imagine this is why (when I took my car in last year re the noise the brakes were making) they cleaned out all the brake dust AND adjusted the cable (tight enough to pull past no more than one click when the car was ready). Thirty some odd dollars total for both.
frog13Ohio · May 30, 2013#7
Let the car roll down a slight decline and depress the brake pedal quite hard....do this a couple of times....that is how it is "suppose" to assist adjusting the rear drum brakes.As the folks said above,it is much better to adjust with the drum off. Don't forget the e-brake handle has an adjustment also....you have to remove the plastic around the lever to gain access to the nut.