Yarisworld Archive

Spark plug torque

10 posts · 37,278 views

Geoff PeaceOriginal postWigan · Mar 20, 2013#1
Does anyone know the correct torque for the spark plugs on the new Yaris. 1.33 litre. 1NR-FE engine? I have the information the plugs are ILKAR7B11. (NGK). and the torque is 15 - 20 Nm. This seems high to me, can anyone supply the correct information please?
Regards Geoff Peace.

Replies 9

Geoff PeaceThread starterWigan · Mar 21, 2013#2
Originally Posted by Yarflana ↑
spark plug data

You may recognize yourself here:).
Oh yes! I quite forgot about that. Must be old age! However I never did get a definite answer as the information given was for the 16mm.plug, the new Yaris has 14mm. The torque I have been given is 15 - 20 Nm. which seems high especially as the plugs have an anti-seize coating to prevent corrosion. Just trying to get the correct information to prevent damage by overtightening.
Regards Geoff Peace.
CTScottUSA, CT · Mar 21, 2013#3
38. INSTALL SPARK PLUG


(a) Using a 14 mm spark plug wrench, install the 4 spark plugs.


Torque: 20 N•m (204 kgf•cm, 15ft•lbf)
Geoff PeaceThread starterWigan · Mar 22, 2013#4
Originally Posted by CTScott ↑
38. INSTALL SPARK PLUG


(a) Using a 14 mm spark plug wrench, install the 4 spark plugs.


Torque: 20 N•m (204 kgf•cm, 15ft•lbf)
Thankyou C.T. If anyone is to be relied upon for the correct information it is your good self. Thankyou again.
Regards Geoff Peace.
badPennsylvania · Aug 16, 2014#5
I have an '08 hatch back. 1.5 liter. My spark plugs don't fit in a 14 or 15 mm socket. They fit in a 16 mm socket.
_
I could be wrong, it could be the burnt carbon, but I think it is taking me 22 ft*lbs to take the old ones off.
_
I'm going with 15 ft*lbs of torque. Is 15 ft*lbs incorrect?
_
Does the addition of an extension have to be taken into account when calculating the torque?
_
there is this that I found too:
_
http://www.autolite.com/media/11853/torquespecs.pdf
_
It only gives specs for 14 or 17 mm. Is this a sign that even though mine don't fit in a 14 mm socket, that they are called that anyway?
ExiwolfmanWasaga beach · Aug 16, 2014#6
Honestly ur putting way to much thought in to it ...just change ur plugs ,use antsieze and snug them up that's it

sent from my S4 on Mars
badPennsylvania · Aug 16, 2014#7
Thanks, I did use antiseize btw. I'm still curious to any other answers though.
268iNZ · Aug 18, 2014#8
apparently NGK Reccomend AGAINST the use of anti-seize provided you don't leave them for 150K+ miles. Nonetheless I used it when replacing my stock ones with NGK Iridium IX plugs..
jadzCanada · Apr 27, 2021#9
Spark plugs x Cylinder head assembly
18 N*m
13 ft.*lbf
2021-04-27 19_07_39-2008 Toyota Yaris Factory Service Manual � Mozilla Firefox.png
CorbenNorthern california · May 5, 2021#10
Is a couple grunts about the same?