Yarisworld Archive

Nathan K3LA

24 posts · 5,699 views

sqcompOriginal postBack at home · Feb 26, 2013#1
Okay gentlemen...

I've taken it up a notch. You guys remember the air horns I put on the car a couple years back?

😈😈😈😈

I've taken it up a notch...a BIG notch.

Picture not included in this copy

Over the next few months, I'll be using a specialized relocation kit to take the individual horns off the original manifold to fit them into the same area that I have the current Buell four horn setup.

I'm upgrading the air lines, electric valve and tank. I'll be fitting 1/2" lines from a 5 gallon tank that. This upgrades from the 2 1/2 gallon tank with 3/8" main line I have now.

I'll be upgrading this thread with pics of the build.

Replies 23

sqcompThread starterBack at home · Mar 2, 2013#2
The RTH relocation kit arrived tonight.

Picture not included in this copy

What you're seeing is a CNC aluminum manifold that reroutes the air that would normally go into the stock Nathan manifold. The three steel pieces behind the manifold will mount onto the three Airchime horns.

The air lines will be 1/2" from the tank all the way to the horns. This is a massive upgrade in volume potential from what is run now; 3/8" from the tank to the manifold...then 1/4" to the current horns. The tank will be twice as large in capacity over my current piece. That is needed for the amount of air that the K3LA can put out.

I've already upgraded the compressor so fill time will be reduced over the old compressor.

Be ready for more updates...
sqcompThread starterBack at home · Mar 2, 2013#3
Originally Posted by TOLMACH ↑
Do you really need that thing in your car?
"Need"? Yes. It is an integral part of my alarm system. I can guarantee that if someone breaks into the car, I will know. I'm simply protecting my investment from thieves. :D

The real reason I purchased the horn setup was to wake people up. Several years ago I was run off the road by a truck whose driver wasn't paying any attention. The stock horn didn't work well enough to wake him up over the sound of his own engine.

This...if this doesn't wake you up you're already dead...

I say that because not only is it loud. And let's say you are deaf, but at close ranges it also has serious pressure it puts out. You can actually feel the horn blasts.

Now, revisiting the "need" part. Does on truly NEED something like this? No. I just choose not to be a victim of other driver's stupidity, carelessness and apathy.

This will also save lives as well. The moment I ever have a road rage incident, and the other party wants to exit their vehicle...they'll get this instead of a laser from a S&W 40 Tactical with CTC grips painted on their melon...I'd rather not have to explain the latter option.

It is for both public safety and personal protection. I use the current horn regularly, at least once a week, for good reasons. For example, on Thursday, I had some soccer mom decide she wanted to be in my lane and didn't even think about looking over her shoulder before she turned into the lane I was in. Did I freak? Nope. I just let her know I was there.
CrankyOldManWest Michigan · Mar 2, 2013#4
Madness! (But genius!)
Kar98DFW · Mar 2, 2013#5
Looks like it would blow the body panels off your Yaris. Now make it play Dixie! ;)
sqcompThread starterBack at home · Mar 2, 2013#6
Originally Posted by CrankyOldMan ↑
Madness! (But genius!)
People said that same thing when I put those two surfboard amplifiers in the trunk of the car...and made it to IASCA world SQ finals. I've been hearing all knids of negatives from people about what I've been trying to do over the years. Actually, my whole soundsystem start was because some rube on the YW forums (from my area) told me I couldn't make a Yaris sound good. He ate his words with secret sauce and hasn't been seen from since on here. I still see negativity and I just feed off it and move forward.

The whole thing is just another level to take modification to the vehicle. I need to look at rims but...I'd really rather have an airbag system on the car first.

This all depends on my deployment to Afghanistan. If it goes forward, I'll be putting the Yaris on pause and playing with old American muscle instead.

@ KAR98 - The horns will be arranged in generally the same manner as the current airhorn setup. The brunt of the SPL will be felt by the concrete which, in turn, will spread the sound more completely versus simply firing it off in the air...not that a train horn NEEDS to be coupled with anything to be loud. This is simply, for lack of a better term, horn loading the sound off the concrete for better sonic spread.
Kar98DFW · Mar 2, 2013#7
LOL, I wasn't hating on your setup, I love it. I think I'll get me a Euro market dual or triple horn though.
sqcompThread starterBack at home · Mar 2, 2013#8
Kar - I know you weren't hating. You'd sound more like post #3 if you were. If you're looking for a small horn setup, look at the Hella electric horn setups available.
why?harnett county NC · Mar 2, 2013#9
that is just awesome. There have been some times I would have loved to be able to let some driver or other have it with something that loud.
sqcompThread starterBack at home · Mar 2, 2013#10
As long as I'm signaling out of necessity to prevent an accident or to warn of danger, I'm perfectly legal.
why?harnett county NC · Mar 2, 2013#11
precisely. And the stock horns are worthless. And nowadays where everyone drives insanely aggressively, including the semi truckers, any advantage you can get is necessary.
sqcompThread starterBack at home · Mar 6, 2013#12
I wonder what this is going to be for? Hmmmmm....let me think...


Picture not included in this copy


Picture not included in this copy
09sedantoronto · Mar 7, 2013#13
i want train horns on my sedan too 🙁 🤤
sqcompThread starterBack at home · Mar 7, 2013#14
I'll be working up a primer on how to do a project like this. Stay tuned.
why?harnett county NC · Mar 7, 2013#15
oh my, that thing is gigantic.
sqcompThread starterBack at home · Mar 7, 2013#16
I get that a lot...

Just kidding.

Seriously though, that's a 5 gallon, eight 1/2" inlet tank. I'll be redoing the entire trunk setup to optimize the use of the trunk for this and the compressor. The amplifiers are going to go back "up" on a 45 degree panel that will butt up against that back plate I have in the trunk already. I'll be fitting that amplifier panel in over the current layout once the tank and compressor is in. That new panel will give me a space in between the two panels for wiring runs on the three new amplifiers. The valve is a nickel plated brass piece with a 12 Volt relay to wire directly into the OEM horn switch like I have now with the smaller kit.

Just for longevity's sake, I'll be working with a silica dehumidifier pack in the trunk seeing as I don't have a lot between the panels and the MDF.
sqcompThread starterBack at home · Mar 9, 2013#17
Picture not included in this copy

...Let the madness begin! The new horns will be installed on the 18th. I'll start around noon and work until I'm finished. I cannot wait until I get to test these on some SOB who likes to cut people off or tailgate...
sickpuppy1Kansas · Mar 10, 2013#18
So you gonna just mail off your old set up to me? lol
sqcompThread starterBack at home · Mar 18, 2013#19
MWAHAHAHA!!!

These horns rock the concrete! Now, I have to make or find a custom grill. I was able to keep the stock manifold BUT...it looks hokie. I had to take the grill off of the front to aim it like I wanted.

I forgot that I had upgraded to 1/2" main from the old tank already, so there was no need to run any line. The hardest part of this whole deal was to place the horns.

Pictures to follow.

http://youtu.be/YuKjZVsDNVY

I think the laughter after the truck's horn says it all. The recording phone's mic can't begin to give you the "feel" of the horns. We had a complaint from the auto repair shop next door. They said something to the effect of, "you're shaking our walls with that damned horn!"
MyzticZ3r0Las Vegas, NV · Mar 19, 2013#20
Oh that is too hilarious what you equipped your yaris with. No one will know what hit them! Er.. Honked em.
sqcompThread starterBack at home · Mar 23, 2013#21
Picture not included in this copy

Picture not included in this copy
^Old Setup

Picture not included in this copy

Picture not included in this copy
^"Adjustment" of the OEM front crash bar. Thank you plasma cutter!

Picture not included in this copy

Now, I have to get the horns powder coated flat black and fit in a 2008 front grill and/or take out the OEM plastic "mesh". The air fitting is 1/4" too high to fit the OEM grill back on there. I've got a whole new trunk to construct. Three class D amps going in and a brand new processor...the factory programmer and I are talking and it seems that I'll be what is basically a beta tester for this piece. Oh yeah, all new 3 way speakers as well.

...I'll make it work...

Picture not included in this copy
mazillaSan Jacinto California · Mar 23, 2013#22
Dope
sqcompThread starterBack at home · Mar 24, 2013#23
That's what my wife called me.

Then I "horned" her. Love is grand!
sqcompThread starterBack at home · Mar 28, 2013#24
roughed in test fit of the dual 400c:

Picture not included in this copy

Now I'll carpet the boards, zip tie the wiring, and work a "surround deck" to fit the old side panels in to make this trunk look sweet!