suuuuucks man. Youll be back to modding soon.
Yaris Stanced!
400 posts · 128,324 views · page 6 of 8
Replies continued
Awesome sound!Originally Posted by G-Ammo ↑
How's the throttle response after the pipe?
Were there any engine warning lights?
Thanks! Love the sound!! :D
Eeehm the throttle response is a bit better, not much :O cuz ofthe stupid electrical gas pedal thing... but together with the injen cold air intake i felt improvement.
No warning lights whatsoever ;)
Eeehm the throttle response is a bit better, not much :O cuz ofthe stupid electrical gas pedal thing... but together with the injen cold air intake i felt improvement.
No warning lights whatsoever ;)
Thanks man! Enjoy that tone!
Sounds great man!
Looks great. Cool modifications too!
I have Urban Cruiser wiperblades for a cleaner look.
Do you still have the Eibach springs for sale?
I have Urban Cruiser wiperblades for a cleaner look.
Do you still have the Eibach springs for sale?
Thanks Eric!
yes they're still for sale! I sent you a PM :)
Also!
For my next update I'm going to buy these in a few weeks probably:
Picture not included in this copy
Looks nice! clean too :) and I might throw out the backseat though :) who knows
yes they're still for sale! I sent you a PM :)
Also!
For my next update I'm going to buy these in a few weeks probably:
Picture not included in this copy
Looks nice! clean too :) and I might throw out the backseat though :) who knows
hi man you have sell your air filter ?
Nope :)
I love those seats!
Me too... but to get them to holland would cost total of 340$ (just mailed the seller)... so I'm not going to do that :( Going to find some seats here in europe probably.
Also they wont make custom brackets for me to fit in the yaris.
Also they wont make custom brackets for me to fit in the yaris.
new updates in a few weeks:
''Stance'' stickers on the rims (on one spoke per rim)...
And in March im going to blind the 3 rear windows! 97% dark :D
''Stance'' stickers on the rims (on one spoke per rim)...
And in March im going to blind the 3 rear windows! 97% dark :D
Alright guys... the horn has been fixed... the problem was: the steering hub was pressing the connector for the horn and airbag wires down into the steering mechanism, which resulted to be broken when we put on the steeringhub. They replaced the steering mechanism and had to drill into the steering wheel hub to make the space bigger and deeper so the connectors wouldnt get pressed together again... total price: 530 Euro's...
Almost a new set of 15'' wheels man :( jesus....
Almost a new set of 15'' wheels man :( jesus....
Made some new pictures!
Got rid of the stickerbombing... added a TRD leather shift
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Got rid of the stickerbombing... added a TRD leather shift
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Cleaninggggg :D It's finally back on the rims and back scraping the ground! Wooohooo!!
Going to make more pictures when the last updates are in the mailbox, some details!
Picture not included in this copy
Picture not included in this copy
Going to make more pictures when the last updates are in the mailbox, some details!
Picture not included in this copy
Picture not included in this copy
Winter is over for you guys. Lucky sob!
So clean! ;)
Nah winter isn't over for us yet... but we aren't getting any snow anymore... haven't had snow the whole f*king winter!!!
I think this could be the warmest winter ever.
I just lowered it again because I couldn't take it anymore riding on steelies, haha :D
Thanks BenDelSol!
I think this could be the warmest winter ever.
I just lowered it again because I couldn't take it anymore riding on steelies, haha :D
Thanks BenDelSol!
Earliest I've been able to go summer mode was end of first week of March. Sadly, that ain't going to happen this year.
That pipe sounds so sick and I'm glad to see the wheels back on. Let's see that new wide setup you were talking about now!
Well yeah... I'm not going to do that anymore man... the fender flares aren't working on the yaris :(
Apart from that... Going for the XXR531 in the future: 15x8 ET20 :) or maybe 16''.
We'll see! More pics of the wheels coming soon with the new d1 spec stuff! Just waiting for the center caps from ebay.
Apart from that... Going for the XXR531 in the future: 15x8 ET20 :) or maybe 16''.
We'll see! More pics of the wheels coming soon with the new d1 spec stuff! Just waiting for the center caps from ebay.
Wait you are getting new wheels or got them already? 531s in 15x8 +20 was my first wheel setup ever on this car
Nah im not getting new wheels yet... maybe this year or next year...
the setup wanted to do was not going to work because of those fender flares that didn't fit ;(
the setup wanted to do was not going to work because of those fender flares that didn't fit ;(
Picture not included in this copy
15x8 +25 Avid AV12 any suggestions for coilovers?
15x8 +25 Avid AV12 any suggestions for coilovers?
BC Racing, Tein... :)
BC Racing or Megan no Tein not low enough lol and not enough adjustability. If you have money to spend Cusco or Silk Roads are probably the best kits you can find for the Yaris/Vios
You look like G-Ammo's sedan twin tho lol
You look like G-Ammo's sedan twin tho lol
Hahahahaha xD LOL
New updates:
Picture not included in this copy
Shit part: I only bought 1 TRD center cap... I thought they came in a set of 4.
So I ordered a full set now... will be here around 21st of feb / 2nd of march :'(
Looks dope doesn't it :D
D1 Spec long open wheel nuts
D1 Spec valve cap
Picture not included in this copy
Picture not included in this copy
OMP steering wheel 300mm
D1 spec carbon shift knob
TRD shift coat-thingy
Picture not included in this copy
Just made some pictures during the day... other pictures were mostly at night so not that visable.
Hope you guys like the updates :D
New updates:
Picture not included in this copy
Shit part: I only bought 1 TRD center cap... I thought they came in a set of 4.
So I ordered a full set now... will be here around 21st of feb / 2nd of march :'(
Looks dope doesn't it :D
D1 Spec long open wheel nuts
D1 Spec valve cap
Picture not included in this copy
Picture not included in this copy
OMP steering wheel 300mm
D1 spec carbon shift knob
TRD shift coat-thingy
Picture not included in this copy
Just made some pictures during the day... other pictures were mostly at night so not that visable.
Hope you guys like the updates :D
Those caps look like they fit the color perfectly
Yeah and it looks nicer with the red in it :D
New idea!!!!!
Sport seats:
NRG ones... I love the look of these, clean and simple!
Hope garm has the right brackets for them (already messaged him on this)!
They are 400 - 450 euro's for 2 seats, cloth & red stitching!!
http://www.avb-sports.be/toyota/yari...r/seats/15213/
And I'll probably throw out the back seat and replace the whole empty spot with a plank cut in the shape of the back part of the yaris (floor) and then going to use the same material like i used in my trunk on the audiosystem, to cover the wood: black velvet.
:D nice idea... when everything goes as plan.. i should have this next month!!!
Sport seats:
NRG ones... I love the look of these, clean and simple!
Hope garm has the right brackets for them (already messaged him on this)!
They are 400 - 450 euro's for 2 seats, cloth & red stitching!!
http://www.avb-sports.be/toyota/yari...r/seats/15213/
And I'll probably throw out the back seat and replace the whole empty spot with a plank cut in the shape of the back part of the yaris (floor) and then going to use the same material like i used in my trunk on the audiosystem, to cover the wood: black velvet.
:D nice idea... when everything goes as plan.. i should have this next month!!!
love the wheels and the set up...do u have the part number for the TRD center wheel cups my new rims did not come with any ...those would be perfect
Both myself and vten went that false floor route. I got suck of no backseat though
you missed your back seat .. or ? what do you mean? XD
Yup I got sick of road noise and nowhere to put crap
Aah ok.. haha :P I'll probably get a new idea for that :)
I wont have any more road noise, because im only gonna rip out the seats :)
I wont have any more road noise, because im only gonna rip out the seats :)
Bought hte Recaro Type-R seats :) black & red stitching... going to get them this saturday and hopefully build them in the same day as well as get rid of the rear seats!!
Few updates... and a downgrade :(
Updates!
Picture not included in this copy
NRG long open wheel nuts & gold valve caps! These lug nuts won't let go of that coating!
Worth the 90 euro's!
I also removed the center caps... dunno... gives it a more awesome look for some reason :P
Downgrades:
I had to remove my rear 15mm spacers... I think I have driven into a puthole here in belgium (which the roads are known for) and I think the wheel and spacer got quite a big hit on them... 1 rim has a very tiny dent in it and the spacer isnt straight anymore (wheel is shaking when I put them on). Also... the screws from the spacers pushed the wheels outside, but that probably is because of the puthole... who knows!
So now my rear wheels are pretty much underneath the fenders (which i don't really like)...
Picture not included in this copy
(my car is on an unlevel surface, so the gap isnt that big normally!! haha)
But my next plan is to buy the rims in staggered setup with keeping the front wheels and going for 15x8 ET0 in the rear!! But that has to wait 2 more months probably :(
Annnndddddd the Wedge Brackets arrived! only took 3/4 days to go from USA to Belgium... thats some priority shit right there.
Picture not included in this copy
(i also ordered a rising sun flag, to cover the rear empty space i'm going to have when my rear seats are out!! :D)
Now some advice from you guys... which screws/bolts should I use to mount the brackets on the sliders?
Thanks!!!!
Updates!
Picture not included in this copy
NRG long open wheel nuts & gold valve caps! These lug nuts won't let go of that coating!
Worth the 90 euro's!
I also removed the center caps... dunno... gives it a more awesome look for some reason :P
Downgrades:
I had to remove my rear 15mm spacers... I think I have driven into a puthole here in belgium (which the roads are known for) and I think the wheel and spacer got quite a big hit on them... 1 rim has a very tiny dent in it and the spacer isnt straight anymore (wheel is shaking when I put them on). Also... the screws from the spacers pushed the wheels outside, but that probably is because of the puthole... who knows!
So now my rear wheels are pretty much underneath the fenders (which i don't really like)...
Picture not included in this copy
(my car is on an unlevel surface, so the gap isnt that big normally!! haha)
But my next plan is to buy the rims in staggered setup with keeping the front wheels and going for 15x8 ET0 in the rear!! But that has to wait 2 more months probably :(
Annnndddddd the Wedge Brackets arrived! only took 3/4 days to go from USA to Belgium... thats some priority shit right there.
Picture not included in this copy
(i also ordered a rising sun flag, to cover the rear empty space i'm going to have when my rear seats are out!! :D)
Now some advice from you guys... which screws/bolts should I use to mount the brackets on the sliders?
Thanks!!!!
looks like a good start, keep it up
What wheel and tire combo u have looks good ...I have same wheel nuts in green on my car very nice and light ( 40$ Canadian ) helps to have friends that get stuff cost ...I find them little long but still looking good
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I have 15x7 ET20 Gunmetal Rota Grid - V rims with 185/45/15 nangkangs.
But my rear are going to have 15x8 ET0 Gunmetal ones with 195/45/15 toyo proxes, but that'll have to wait a few months :(|
Thanks for the replies!
But my rear are going to have 15x8 ET0 Gunmetal ones with 195/45/15 toyo proxes, but that'll have to wait a few months :(|
Thanks for the replies!
Picture not included in this copy
Tadaaaa! :D with a little bit of pushing (the seatbelt is pushing the plastic console inside, where the e-brake is) it went it pretty well... they really feel good and i'm sitting a bit lower (oh the irony).
hope you like it!
Also... I folded down the back seat... because when we tried to take it out; there were cables running underneath it and we didn't know what they were. so we kept the back seat in.
As a finishing touch I put the rising sun flag over it! :D
Tadaaaa! :D with a little bit of pushing (the seatbelt is pushing the plastic console inside, where the e-brake is) it went it pretty well... they really feel good and i'm sitting a bit lower (oh the irony).
hope you like it!
Also... I folded down the back seat... because when we tried to take it out; there were cables running underneath it and we didn't know what they were. so we kept the back seat in.
As a finishing touch I put the rising sun flag over it! :D
Wooow I love those seats man
thanks! me 2! although they are reps... the ystill look good!
but you notice because the RECARO letters aren't beautifully lined up. But hey... it's still ''just'' a yaris so... not going to pay 800 euro's for 1 seat haha
but you notice because the RECARO letters aren't beautifully lined up. But hey... it's still ''just'' a yaris so... not going to pay 800 euro's for 1 seat haha
Picture not included in this copyPicture not included in this copyPicture not included in this copy
Diamomd race wheels +0 offsets. Still need the dpacers for the fronts :(
Sent from my iPhone using Tapatalk
Diamomd race wheels +0 offsets. Still need the dpacers for the fronts :(
Sent from my iPhone using Tapatalk
Originally Posted by G-Ammo ↑Picture not included in this copy
Tadaaaa! :D with a little bit of pushing (the seatbelt is pushing the plastic console inside, where the e-brake is) it went it pretty well... they really feel good and i'm sitting a bit lower (oh the irony).
hope you like it!
Also... I folded down the back seat... because when we tried to take it out; there were cables running underneath it and we didn't know what they were. so we kept the back seat in.
As a finishing touch I put the rising sun flag over it! :D
Where did you find those replicas ? And did you change the seat mounts ?
Sent from my iPhone using Tapatalk
Oh i just saw ur answer Deadliest..
I found them on Jappower.nl (dutch site)... Yes the seat mounts are from Wedge Engineering... they make them for the Yaris! Only downside is that the seatbelt spot is more outwards into the center console which results that the plastic will bend inside (don't really care about that)...
They are Recaro Type-R seats (they are replica's!)
I found them on Jappower.nl (dutch site)... Yes the seat mounts are from Wedge Engineering... they make them for the Yaris! Only downside is that the seatbelt spot is more outwards into the center console which results that the plastic will bend inside (don't really care about that)...
They are Recaro Type-R seats (they are replica's!)
Woooh! I got my full stainless steel midpipe, from cat till my exhaust! Sound is deeper now and no more leaking, finally!!!
also remounted 20mm spacers in the back. But i did find out that my rear left wheel is a liiiiiitle bit bend :( maybe its best to balance them out again.
25th of May its JAPFEST here in Holland :D so stoked!!!!
Picture not included in this copy
Picture not included in this copy
also remounted 20mm spacers in the back. But i did find out that my rear left wheel is a liiiiiitle bit bend :( maybe its best to balance them out again.
25th of May its JAPFEST here in Holland :D so stoked!!!!
Picture not included in this copy
Picture not included in this copy
back in action!!! Nice!
Ok thanks a lot im going too look into getting those too! Do you have any experience with fender flares? Your yarisis super clean but mine is heavily offset ...but ive heard of ppl just buying 4 front scion xb fender flares to fit nicely all around .. Any thoughts? Picture not included in this copyPicture not included in this copyPicture not included in this copyOriginally Posted by G-Ammo ↑Oh i just saw ur answer Deadliest..
I found them on Jappower.nl (dutch site)... Yes the seat mounts are from Wedge Engineering... they make them for the Yaris! Only downside is that the seatbelt spot is more outwards into the center console which results that the plastic will bend inside (don't really care about that)...
They are Recaro Type-R seats (they are replica's!)