Yarisworld Archive

airbag/passenger seat belt light(s)

7 posts · 8,577 views

matthewaiOriginal postunited states · Feb 20, 2013#1
hi guys i have a question is there any way to reset the airbag lights on the dash ? (red dash light & yellow "passenger airbag off") does it have to do with a tripped airbag sensor even though no airbags were deployed ? and also the passenger seat belt light flashes even when someone is sitting in the seat with the seat belt plugged in . can i do it with a scanner tool or is this a "bring to the shop" deal

Replies 6

CTScottUSA, CT · Feb 20, 2013#2
Those lights flashing indicate that the passenger occupant classification system is not happy. check the grey and black connectors that plug into the little module mounted to the bottom of the front of the passenger seat.
matthewaiThread starterunited states · Feb 21, 2013#3
okay ill report back here tom haha
matthewaiThread starterunited states · Feb 24, 2013#4
damn no luck i unplugged them and the re plugged them . i doubt disconnecting the battery would do anything either

i might try the scanner with my buddy
CTScottUSA, CT · Feb 24, 2013#5
Unplugging the battery won't help. Only a techstream or a vehicle specific scanner can read the codes. Try the jumper method...
matthewaiThread starterunited states · Feb 26, 2013#6
i dont think i know that method haha