Yarisworld Archive

Will not shift into park

8 posts · 6,310 views

AlaskaYarisOriginal postAlaska · Feb 18, 2013#1
Hello All!

Im new to this forum and would like to say hello to all my fellow Yaris owners!

Well first off I have a 07 Yaris Sedan with AT. I recently plowed into a snow bank, not very surprising since Im in alaska.

Anyways, Ever since the "incident" it is hard to shift from Park to Drive, the transmission is fine but the shift lever inside my car is hard to move. My car also no longer recognizes that it is in Park and does not turn on the "P" light or lock the front tires, ie Engange Park.

Where should I start in diagnosing the problem?

Any help would be appreciated!

Thanks!

Replies 7

CTScottUSA, CT · Feb 18, 2013#2
There is a 9 pin grey connector on the top of AT, which provides the shift position indication to the ECM (who actually controls the transmission). I would check to make sure that the connector didn't get damaged.
CoryMWhite Rock BC · Feb 18, 2013#3
Check the cable and brackets on the front of the transmission. If you have someone move the shifter in the car, you will see it moving and pulling a lever. I would guess either the cable bracket or the lever the cable moves is bent.
AlaskaYarisThread starterAlaska · Feb 18, 2013#4
Do I need to get my car into the air to see the cables and levers? Also is it on the driver or passenger side?
CTScottUSA, CT · Feb 18, 2013#5
You can get at them better from above. They are both on the front driver's side, but the air intake and battery make it a bit difficult to see them. In the picture below you can see the shift linkage and the grey connector above it.

Automatic Transmission.jpg
CoryMWhite Rock BC · Feb 18, 2013#6
To use the picture that the ever helpful CTScott posted. Most likely the cable or lever is bent. Check all the things the arrows point to.
Could also be ice or rocks stuck in there too.
Automatic Transmission.jpg
AlaskaYarisThread starterAlaska · Feb 18, 2013#7
Well it appears that I have bent the crap out of the these assemblies. Looks like Ill have to find a friends garage.

Thanks for all of your help!
CoryMWhite Rock BC · Feb 19, 2013#8
Originally Posted by AlaskaYaris ↑
Well it appears that I have bent the crap out of the these assemblies. Looks like Ill have to find a friends garage.

Thanks for all of your help!
Bugger, but at least now you know.

Cheers.