Yarisworld Archive

SCCA Houston Region B Spec build :)

127 posts · 57,591 views · page 2 of 3

Replies continued

racerbLeland, NC · Sep 15, 2013#51
Good to hear you haven't given up, I decided just to Auto-X my Yaris and build my Celica for road racing. If you need a good deal on safety gear for your car, check with Ron at Discovery Parts, he will give you package pricing for the works.....
http://www.discoveryparts.com/

Ron provides trackside support for all our races and even sponsors quite a few Drivers.

racerb 🎉
TRacingSouth East · Oct 1, 2013#52
Hey you all, any updates on this? I ran across this thread searching for any B-Spec Yaris projects after seeing there was no notes in the GCR so wasn't sure if a kit was available...guess not.

I was considering building one this winter for next season as the Yaris can be found much less than a Mazda or Honda. Please keep this updated to if any package will be approved.
Jason@SportsCarDebary, FL · Oct 1, 2013#53
Originally Posted by TRacing ↑
Hey you all, any updates on this? I ran across this thread searching for any B-Spec Yaris projects after seeing there was no notes in the GCR so wasn't sure if a kit was available...guess not.

I was considering building one this winter for next season as the Yaris can be found much less than a Mazda or Honda. Please keep this updated to if any package will be approved.
The CRB and B-Spec committee have been a challenge to deal with... The committee is made up of the manufacturers that support BS in Pro Racing (Mazda/Honda/Fiat/Ford/Mini/Kia), and they essentially don't want anyone to come in who is not committed to Pro Racing. Toyota had no official interest in BS until it became a National Club Racing class, and still have no interest in Pro Racing.

Because Toyota will not enter World Challenge the BS committee and CRB have made no effort to approve the kit we submitted on behalf of TRD over a year ago. We have had a number of exchanges via email and phone with members of the committee and got nowhere.

Finally at this years Runoffs we put them on the spot in front of other members at the CRB town-hall, asking why our kit had not been approved, as they let BS sit dead last in participation numbers. They alleged that they offered us the TRD kit with a 100lb weight penalty and we declined. This was completely untrue. We now have a verbal, of course I am not holding my breath, that we will get the kit with a 100lb weight increase to the car - moving it from 2420lbs to 2520lbs.

On the surface this sounds bad, but when you compare the Yaris to its nearest rival on paper, the Mazda 2, it should be ok. The Mazda 2 has had a number of weight hits over the last year, and as of next month will reportedly have to weigh 2450lbs ( http://scca.cdn.racersites.com/prod/...9%20prelim.pdf ) this was supposed to happen in Sept but they decided to wait until after the Runoffs. The Mazda 2 also just got a restrictor plate in World Challenge, and the CRB says it will follow the WC adjustments, so that car will get even slower.

Unfortunately these cars all continue to get slowed down in an effort to make the Fiat competitive.
Larry@CFROrlando, FL area · Oct 2, 2013#54
To those who have built a Yaris or are in the process, what weight is the gutted body and what is the weight with a full comp SCCA cage? I am looking for the difference in Andrew's 2009 & the 2012? Thanks!
Jason@SportsCarDebary, FL · Oct 2, 2013#55
Originally Posted by Larry@CFR ↑
To those who have built a Yaris or are in the process, what weight is the gutted body and what is the weight with a full comp SCCA cage? I am looking for the difference in Andrew's 2009 & the 2012? Thanks!
We have only built a 2008 and 2009 in B-Spec trim, our 2007 and 2012 were H Prod cars.

Our 2009 BS was raced this past January, without driver and 3/4 fuel at the end of the race it weighed: 2197
The driver was a 6'+ and 230lbs, so it just made minimum weight.
This car has a way overbuilt cage (because when we built these back in 2010 the thought was BS was going to use Grand Am specs for cages), 1.75"x .120 tubes, it is a heavy cage. The car also has a full fire system, and ran on steel wheels. Any normal size driver is going to need a lot of ballast and start with a full tank of fuel.

In H Prod trim when I weighed both the 2007 and 2012 with empty tanks the difference was 100lbs. However, the 2012 did not have the benefit of a carbon hood or hatch like the 2007, and at the time the 2007 was on a much lighter 13" wheel/tire package. I think the actual weight difference between the two cars if setup exactly the same would be less than 50lbs. With the longer, more stable wheelbase, and cleaner aero the 2012 should be the better choice.
Jason@SportsCarDebary, FL · Nov 14, 2013#56
From the latest tech bulletin (figures, just as we are stripping the BS car for the crusher)

B-Spec
1. #12883 (Club Racing Board ) Yaris Update for 2014 In B-Spec, Toyota Yaris (07-12), add to the spec line as follows:
Weight
2420 old
2500 new
Notes:
PTR04-52061 TRD Sport Shocks
PTR11-52070 TRD Spring Kit
FHT_RacingThread starterHouston, TX · Dec 7, 2013#57
No turning back now :) Dropped off the car for CAGE!
malibuguyWestminster, MD · Dec 7, 2013#58
Sweet build.

I'd love to build a yaris for track duty to eventually replace my turbo tercel track day car.

With the weight limits it looks like for bspec...it might be easier to build a sedan...take advantage of the slightly better aero
FHT_RacingThread starterHouston, TX · Jan 6, 2014#59
Originally Posted by Jason@SportsCar ↑
From the latest tech bulletin (figures, just as we are stripping the BS car for the crusher)

B-Spec
1. #12883 (Club Racing Board ) Yaris Update for 2014 In B-Spec, Toyota Yaris (07-12), add to the spec line as follows:
Weight
2420 old
2500 new
Notes:
PTR04-52061 TRD Sport Shocks
PTR11-52070 TRD Spring Kit
So we are weighted down an extra 80lbs with or without the TRD suspension?!
Jason@SportsCarDebary, FL · Jan 7, 2014#60
Originally Posted by FHT_Racing ↑
So we are weighted down an extra 80lbs with or without the TRD suspension?!
Not only is the weight now 2500lbs, the 2014 GCR still does not show the kit. 😆
Larry@CFROrlando, FL area · Jan 8, 2014#61
Originally Posted by Jason@SportsCar ↑
Not only is the weight now 2500lbs, the 2014 GCR still does not show the kit. 😆
Yes but the Mazda2 is back to 2350 & Chevy package is listed! 🤷 I would imagine if you printed the Fastrack 13-12 where it lists the TRD package you would be fine. Englewood or Topeka, they still can't keep it straight. 😉
I did notice all cars get adjustable swaybar links. Is there a good model to use with the TRD bars?
xnamerxxso cal · Jan 8, 2014#62
TRD bar isn't legal.
Larry@CFROrlando, FL area · Jan 8, 2014#63
Originally Posted by xnamerxx ↑
TRD bar isn't legal.
Correct, but the rest of the needed parts are going to have to be requested from SCCA and fight our way thru the approval process.
Larry@CFROrlando, FL area · Jan 8, 2014#64
If you guys want to see some great B-Spec pictures from SCCA Major at Sebring, check Facebook at 'Michael Lilley Photography and Design' and search for '2014 BFGoodrich Tires Sebring Super Tour'. The Saturday set starts with B-Spec group and a Fiesta getting punted on the 1st laps! 7 B-Spec's were entered and 6 showed up. PWC TCB driver Ernie Francis, Jr was DQ'd on Sunday due to "Unsafe Driving". Wonder where he learned that??
xnamerxxso cal · Jan 9, 2014#65
If it were me I'd start with trying to get another suspension approved, the TRD isn't good enough for track use. Given Bilstein has worked with my HR springs it should be pretty easy to adapt the HR coilovers to something useful.
xnamerxxso cal · Jan 29, 2014#66
Well throwing my hat into the pool with a B spec Yaris. Got 2 Honda Fits signed up for the license school so I should have some fun trying to keep up with the Hondas.

Been thrashing for the past few months trying to get the car ready and its finally close enough to be legal to race. Gotta add quite a bit of weight for it to hit the minimum 2500lbs

Picture not included in this copy

With the stock suspension car rides kinda high.

Picture not included in this copy
Jason@SportsCarDebary, FL · Jan 29, 2014#67
Originally Posted by xnamerxx ↑
Well throwing my hat into the pool with a B spec Yaris. Got 2 Honda Fits signed up for the license school so I should have some fun trying to keep up with the Hondas.

Been thrashing for the past few months trying to get the car ready and its finally close enough to be legal to race. Gotta add quite a bit of weight for it to hit the minimum 2500lbs

Picture not included in this copy

With the stock suspension car rides kinda high.

Picture not included in this copy
Should have grabbed the blue mirrors. Remember that weight is with driver at the end of the race.
xnamerxxso cal · Jan 29, 2014#68
Yeah it really would have matched the car better with the blue mirrors but I've got some ideas for livery on the car. There has been some talk at work about adding a corporate livery to the car but I don't think it'll gain any traction.

I figure the car would need about 100-120lbs with my weight when its all said and done.
Jason@SportsCarDebary, FL · Jan 29, 2014#69
Originally Posted by xnamerxx ↑
Yeah it really would have matched the car better with the blue mirrors but I've got some ideas for livery on the car. There has been some talk at work about adding a corporate livery to the car but I don't think it'll gain any traction.

I figure the car would need about 100-120lbs with my weight when its all said and done.
Put half a tank of gas in and see where you are. If you start full you won't get under half in a 40 min race.

Is the TRD suspension still on your car?
xnamerxxso cal · Jan 29, 2014#70
TRD is still on my car, everything is getting pulled off and replaced sometime this week. Although I've been really tempted to throw the STF Bilsteins on the car just to see what its like.
RJayHolland · Jan 29, 2014#71
2500 lbs? That's quite some weight for a little car, that's heavyer than stock or isn't it for your modelyears?

I weigh 1035 kilos / 2277 lbs with just my road car with the stuff I have in it on a normal day including me & half a tank of fuel. (Yes, that's my yaris. My bmw weighs about 30-70 kilos less depending on fuel and including me)
xnamerxxso cal · Jan 29, 2014#72
The car has never been vetted so the minimum weight might change in the future, depending on how competitive the car is with its competition.

I've been told the Fiat 500 is so slow that all the other cars had to be dumbed down so it could keep pace.

My autox car weighs 2110 with a full interior and a really lightweight exhaust, but it doesn't have a cage to deal with.
RJayHolland · Jan 29, 2014#73
Fiat 500? Wouldn't you be better off racing the scorpion-badged version?

Mine's bone stock. with spare tire and tools and such. Also airconditioning adds a little.
ilikericesavannah, ga · Jan 29, 2014#74
The Abarth is turbo charged pushing 180ish bhp. That would slaughter the others with the rules that allow certain upgrades for all vehicles. Best was is to just add weight to even out the playing field.
RJayHolland · Jan 29, 2014#75
I see the problem, bound to an average bph / weight ratio....
And it's cheaper to add weight than to add power.

A friend of mine had to ad about 140-150 lbs of lead to his Suzuki Swift cupracer last year, cause the caŕ's stripped out and he himself is little more than a twig....
xnamerxxso cal · Jan 31, 2014#76
Well final weight on the car is 2430 so I have to add some ballast but not a ton.
xnamerxxso cal · Jan 31, 2014#77
Almost looks like a racecar now.


Picture not included in this copy
xnamerxxso cal · Feb 11, 2014#78
Well finished up my Drivers school, got my competition License and attended my first B-Spec race. Its been a long weekend but I finally have some time to reflect over the past weekend at Buttonwillow. We ran configuration 14 cw

Picture not included in this copy

The car performed about as well as expected, the weight and suspension are holding it back, spinning the inside tire on every corner aside from Riverside was extremely frustrating. High speed stability is still questionable, but somewhat easy manage if you keep the speed below 95. The car really needs some more rear roll stiffness ala TRD bar or something. The stability issue was probably tire or alignment related, haven't figured that one out yet.

I had 2 Honda Fits to compete against and the 5 second gap between me and the faster driver of the Honda Fit is likely something I wont be able to overcome with the cars current setup. While it was quite fun dicing with the slower driver, but its difficult in knowing I have a long hill to climb if I want to keep up with the faster cars.

All in all I'm finding it very hard to get motivated with this car as penalized as it currently is. A few tweaks to the weight and suspension, and it should be good.
Larry@CFROrlando, FL area · Feb 11, 2014#79
Originally Posted by xnamerxx ↑
Well finished up my Drivers school, got my competition License and attended my first B-Spec race. Its been a long weekend but I finally have some time to reflect over the past weekend at Buttonwillow. We ran configuration 14 cw

Picture not included in this copy

The car performed about as well as expected, the weight and suspension are holding it back, spinning the inside tire on every corner aside from Riverside was extremely frustrating. High speed stability is still questionable, but somewhat easy manage if you keep the speed below 95. The car really needs some more rear roll stiffness ala TRD bar or something. The stability issue was probably tire or alignment related, haven't figured that one out yet.

I had 2 Honda Fits to compete against and the 5 second gap between me and the faster driver of the Honda Fit is likely something I wont be able to overcome with the cars current setup. While it was quite fun dicing with the slower driver, but its difficult in knowing I have a long hill to climb if I want to keep up with the faster cars.

All in all I'm finding it very hard to get motivated with this car as penalized as it currently is. A few tweaks to the weight and suspension, and it should be good.
CONGRATULATIONS! You have built & raced a Toyota Yaris in SCCA which only one other car/driver has done. Now we can use your & Jason's experience to lobby SCCA Comp Board for changes. Without another car on track it's impossible to have any data to prove our case. Good job building a car that ran the entire school and was able to compete, but I know you didn't feel competitive. Were the 2 Honda's schoolies or licensed drivers getting track time?👍
Larry@CFROrlando, FL area · Feb 11, 2014#80
Haven't heard from FHT_Racing in awhile, how's the build going in Houston?? Saw Joe McClughan used Taake's TCB car for a B-Spec SCCA Major race last weekend and set the lap record. Unfortunately, no competition there but he ran well.
Jason@SportsCarDebary, FL · Feb 11, 2014#81
Originally Posted by Larry@CFR ↑
CONGRATULATIONS! You have built & raced a Toyota Yaris in SCCA which only one other car/driver has done. Now we can use your & Jason's experience to lobby SCCA Comp Board for changes. Without another car on track it's impossible to have any data to prove our case. Good job building a car that ran the entire school and was able to compete, but I know you didn't feel competitive. Were the 2 Honda's schoolies or licensed drivers getting track time?👍
Well only one Yaris still has done it, he resurrected our car from the scrap heap. 😆

Wow are those numbers small... Are those 8" high with a 1.5" stroke?

Picture not included in this copy
xnamerxxso cal · Feb 11, 2014#82
Originally Posted by Larry@CFR ↑
CONGRATULATIONS! You have built & raced a Toyota Yaris in SCCA which only one other car/driver has done. Now we can use your & Jason's experience to lobby SCCA Comp Board for changes. Without another car on track it's impossible to have any data to prove our case. Good job building a car that ran the entire school and was able to compete, but I know you didn't feel competitive. Were the 2 Honda's schoolies or licensed drivers getting track time?👍
Both were going through the school as well, one was a THR-W employee the other was a HPD employee. One was in the familiar Red TCB world challenge car, and the other was driving a Black Honda Fit. The red TCB car set a B-Spec lap record at the track and was a full 5 seconds faster than my race time although it was only 4 seconds faster than my qualifying time.

I'll admit I'm not the best driver, and running on old tires doesn't help my case either, and I know my rant was doom and gloom, but the chassis really isn't bad, the inside spin issues just need to be reduced and the car should fly on track...well fly as fast as a b-spec car can.
xnamerxxso cal · Feb 11, 2014#83
Something like that, I pulled the out of the vinyl bin a few minutes before I left. The guy that normally makes that stuff for me had his machine break so I was left scrambling to get something on the car. Timing and scoring had a nice chat with me about that.

Also looking at that picture I think I'm almost on the rear bumpstops LOL.
Jason@SportsCarDebary, FL · Feb 11, 2014#84
Originally Posted by xnamerxx ↑
Both were going through the school as well, one was a THR-W employee the other was a HPD employee. One was in the familiar Red TCB world challenge car, and the other was driving a Black Honda Fit. The red TCB car set a B-Spec lap record at the track and was a full 5 seconds faster than my race time although it was only 4 seconds faster than my qualifying time.

I'll admit I'm not the best driver, and running on old tires doesn't help my case either, and I know my rant was doom and gloom, but the chassis really isn't bad, the inside spin issues just need to be reduced and the car should fly on track...well fly as fast as a b-spec car can.
Keep in mind that configuration is typically only used for the school weekend, so often times the records are/were very soft or did not previously exists. While the BS record is a 2:09 now, the HP record dates back to 1996 and is a 2:16. 😆

Once you get to Willow Springs you will have a better idea of how far off the car is.
Jason@SportsCarDebary, FL · Feb 11, 2014#85
Originally Posted by xnamerxx ↑
Something like that, I pulled the out of the vinyl bin a few minutes before I left. The guy that normally makes that stuff for me had his machine break so I was left scrambling to get something on the car. Timing and scoring had a nice chat with me about that.

Also looking at that picture I think I'm almost on the rear bumpstops LOL.
You should be on all of the stops as soft as those springs are.

Did anyone trip over your front tow hook? 😆
xnamerxxso cal · Feb 11, 2014#86
LOL no but a few people jumped on it to see how sturdy it was.

Yeah the car riding the bump stop like that makes sense as to why the car was so loose going into Riverside. Diving in at 106 mph resulted in a very tight sphincter when the back of the car decided it didn't want to follow me. Jason in the black Fit even backed up a bit when I missed the apex by 10ft expecting a big crash.
Jason@SportsCarDebary, FL · Feb 11, 2014#87
Originally Posted by xnamerxx ↑
LOL no but a few people jumped on it to see how sturdy it was.

Yeah the car riding the bump stop like that makes sense as to why the car was so loose going into Riverside. Diving in at 106 mph resulted in a very tight sphincter when the back of the car decided it didn't want to follow me. Jason in the black Fit even backed up a bit when I missed the apex by 10ft expecting a big crash.
You got in to 4th gear? 👏
xnamerxxso cal · Feb 11, 2014#88
My 106 run I was on the speed limiter, after that I usually lifted somewhere around 100-105. I had to shift into 4th during Dog Leg and Sunset and the front straight. Like I said I had no complaints about power, I could pull on the Hondas during the faster portions of track, but they walked away from me during the twisty bits.
Jason@SportsCarDebary, FL · Feb 11, 2014#89
Originally Posted by xnamerxx ↑
My 106 run I was on the speed limiter, after that I usually lifted somewhere around 100-105. I had to shift into 4th during Dog Leg and Sunset and the front straight. Like I said I had no complaints about power, I could pull on the Hondas during the faster portions of track, but they walked away from me during the twisty bits.
Speed limiter or rev limiter? I thought the top speed limiter was 118 mph?

My math shows the top of 3rd is 91mph with a stock ECU, and 124 in 4th.
xnamerxxso cal · Feb 11, 2014#90
The speed limiter is supposed to kick in at 112mph, the car really didn't want to go above 106 indicated, it kinda felt like the speed limiter was kicking in. Not sure if it was or not but it felt like it.
Jason@SportsCarDebary, FL · Feb 11, 2014#91
Originally Posted by xnamerxx ↑
The speed limiter is supposed to kick in at 112mph, the car really didn't want to go above 106 indicated, it kinda felt like the speed limiter was kicking in. Not sure if it was or not but it felt like it.
That is just wind resistance. 😆
xnamerxxso cal · Feb 12, 2014#92
Talking to the Honda guys they were just shifting into 5th so they were doing 104-110 give or take.
xnamerxxso cal · Feb 12, 2014#93
Originally Posted by Larry@CFR ↑
CONGRATULATIONS! You have built & raced a Toyota Yaris in SCCA which only one other car/driver has done. Now we can use your & Jason's experience to lobby SCCA Comp Board for changes. Without another car on track it's impossible to have any data to prove our case. Good job building a car that ran the entire school and was able to compete, but I know you didn't feel competitive. Were the 2 Honda's schoolies or licensed drivers getting track time?👍
I don't know how the bspec board works, and I'm not positive without Toyota's support we'll be able to proceed forward.

I was really happy with the track performance of the old 2012 STF suspension and it fits the bill pretty well for B-Spec, but I don't think you could create a "kit" out of it because of the fact parts need to be modified to work.

If you want details I can post shock dyno data, but essentially it was the H&R Coilover kit with 7"x2.5"x350# front springs and 8"x3"x400 rear springs. The rear shocks will need to be shortened by 1" as they have too much travel and allow the spring to unseat, but zip ties seem to hold the spring in well enough. Car was reasonable comfortable on the street, I drove from Irvine, California to Lincoln, Nebraska with that setup, and didn't roll like a boat on the track, it was reasonable able to grip the inside front with minimal inside front spin.
xnamerxxso cal · Feb 13, 2014#94
Shot during practice.

Picture not included in this copy
FHT_RacingThread starterHouston, TX · Apr 8, 2014#95
Looking good! I'll post up pictures of mine today.

I'll be putting it on the scales and adding weight this week.

Updates ASAP!
FHT_RacingThread starterHouston, TX · Apr 8, 2014#96
Picture not included in this copy

I need better brake pads! The HAWK HPS crapped out.
xnamerxxso cal · Apr 8, 2014#97
Make sure you get lots of weight, if your car is anything like mine you'll need to add 100+ lbs.

I had to add a bunch of weight to the front footwell and rear passenger seat area to get the numbers this close. Still running too much fuel though.

Picture not included in this copy
xnamerxxso cal · Apr 8, 2014#98
Nice looking car :)

Yeah get rid of that street crap, it'll save you headache in the future. I'm running Carbotech XP8 I think, they work really well for the price, but I would probably get a set of cut DCT-60s
Jason@SportsCarDebary, FL · Apr 8, 2014#99
Originally Posted by FHT_Racing ↑
I need better brake pads! The HAWK HPS crapped out.
The black stripe looks good.

About the only "off the shelf" pad is a carbotech - typically they don't stock them, but can make them in a few days. We ran those for a year or so, but never really liked them. They have to much initial bite for my taste, and with no ABS allowed in Prod they tended to cause flat spotted tires. 😆 We had Porterfield cut a set of Hawk DTC-60 pads down to fit the Yaris caliper, and have never been happier. Very progressive pads, and with more than a year of racing on them they still look like new. 👍 Well worth the money.
xnamerxxso cal · Apr 8, 2014#100
Originally Posted by Jason@SportsCar ↑
They have to much initial bite for my taste, and with no ABS allowed in Prod they tended to cause flat spotted tires. 😆
I resemble that remark 😆