Yarisworld Archive

Rear wheel speed sensors

8 posts · 5,760 views

Bluevitz-rsOriginal postOshawa, Ontario, Canada · Feb 4, 2013#1
I've been following the rear speed sensor issue with the last gen Yaris and was wondering if anyone with a 3rd gen has taken a look at the plug on the rear wheels to see if they're still using the same crappy connector? If so, it might be a good bit of preventative maintenance to take the connector apart now while it's still new and see if they've added dielectric grease to it. If not, add it to ensure they never fail from the get go.

Replies 7

enviriCT · Feb 5, 2013#2
are u talkin about

Picture not included in this copy

that plug?
mr_milesPortland, OR · Feb 5, 2013#3
That's a speed sensor? I was wondering what that was then I put my hub spacers. delicious -3 degrees.
enviriCT · Feb 5, 2013#4
i thought it was an abs sensor.
Bluevitz-rsThread starterOshawa, Ontario, Canada · Feb 5, 2013#5
Yes that's the sensor. Call it what you will, I'd pack a little bit of dielectric grease in there to prevent it from corroding if it still the same sensor.
kanagawv, usa · Apr 11, 2013#6
I'm in the process of replacing my rear abs sensor. I have already removed the hub assembly and replaced the sensor. When re-attaching the hub assembly, should I use lock-tite on the bolts?
Bluevitz-rsThread starterOshawa, Ontario, Canada · Apr 11, 2013#7
Was there any on the ones you removed? I think you just need to torque them to spec.
YarisSedanCalifornia - Bay Area · Apr 11, 2013#8
Originally Posted by kanaga ↑
I'm in the process of replacing my rear abs sensor. I have already removed the hub assembly and replaced the sensor. When re-attaching the hub assembly, should I use lock-tite on the bolts?
If there wasn't any loctite on it before it isnt nessisary but it dosnt hurt either.