Absolutely Red 12Original postYour moms house. · Jan 31, 2013#1Just installed.
Im getting old, this thing is loud!!
Picture not included in this copy
Replies 15
DJYojimboChicago · Jan 31, 2013#2looks awesome! I have mine but it's too cold here at Chicago so i will post pics of mine when installed at warmer temperatures!
SuperflyIllinois · Feb 1, 2013#3Dude, that is ill. I'm still debating if I want to switch out the exhaust or work on new wheels this spring. Definitely thought I had my mind made up but now....
Absolutely Red 12Thread starterYour moms house. · Feb 1, 2013#4It only took 15 minutes to install with a floor jack and one jack stand.
It doesn't hang as low as pictured at Tanabes website, must be the angle of their pics.
Does not sound like an egg. roll launcher.
Some drone in the cabin.
I thought it was overly loud, until I had my son drive it down the street away from me!!
Very elegant sound.
muffin_topMidwest · Feb 1, 2013#5Has anyone tried this on an SE, yet?
DJYojimboChicago · Feb 2, 2013#6going to try on my SE when weather is warmer
muffin_topMidwest · Feb 2, 2013#7 Originally Posted by
DJYojimbo ↑ going to try on my SE when weather is warmer
Can't wait to see the fitment.. I really want the Touring Medalion!
Absolutely Red 12Thread starterYour moms house. · Feb 2, 2013#8 Originally Posted by
muffin_top ↑ Can't wait to see the fitment.. I really want the Touring Medalion!
That is the Touring Medallion!
Would it be rice if I heated, and turned the tip up slightly?
DJYojimboChicago · Feb 3, 2013#9I think Muffin wants to see a touring on a 2012 SE
muffin_topMidwest · Feb 3, 2013#10 Originally Posted by
Absolutely Red 12 ↑ That is the Touring Medallion!
Would it be rice if I heated, and turned the tip up slightly?
How dare you even think about defacing that beauty of a muffler?!? 😉
Originally Posted by
DJYojimbo ↑ I think Muffin wants to see a touring on a 2012 SE
DJ is right, I want to see the fitment on an SE.. I think it's going to be a bit too far to the right..
Why don't you UPS it over to me, I'm just dying to check!! 🤷
Absolutely Red 12Thread starterYour moms house. · Feb 3, 2013#11 Originally Posted by
muffin_top ↑ How dare you even think about defacing that beauty of a muffler?!? 😉
DJ is right, I want to see the fitment on an SE.. I think it's going to be a bit too far to the right..
Why don't you UPS it over to me, I'm just dying to check!! 🤷
Im thinking just a couple of degrees upward.
Ill ship it to you right away!!🤘 NOT!!😆
With the Yaris muffler having a donut flange, there is enough play to manipulate the hangers slightly to angle the muffler so the tip lines up.
I can push horizontally on the flange area and change the muffler's angle.
It means nothing to me, as I dont have a cutout.
muffin_topMidwest · Feb 4, 2013#12You could move it somewhat.. Is there good clearance just above the flange? That is where my TRD seems tightest and most likely to hit if I were to change its mounting height.
I was hoping DJ would send me his! You are much too far away and already have it installed.. :)
DJYojimboChicago · Feb 4, 2013#13i'm hoping to install it end of march unless muffin wants to help me install on mine :)
muffin_topMidwest · Feb 5, 2013#14 Originally Posted by
DJYojimbo ↑ i'm hoping to install it end of march unless muffin wants to help me install on mine :)
Its super easy. The
I'm three hours from Chi-town
venezbras2013Fort Lauderdale, FL · Apr 30, 2013#15Any updates on installing it on an SE model?
DJYojimboChicago · Apr 30, 2013#16