Yarisworld Archive

Beer Tap Handle V2.0

11 posts · 4,464 views

bitz767Original postHarrisburg, PA · Jan 26, 2013#1
I finally got my tap handle shifter installed. I started off with a resin tap handle, but it snapped off the day after install😲😲 I found a better tap handle that was completely metal. I also had the shifter significantly shortened and an adapter from the standard thread in the toyota, to the thread for the tap handle. If this one breaks, I am going to get a real katana and go that route. 👍

5 attachments not included in this copy

Replies 10

DJPanenoSan Diego, CA · Jan 28, 2013#2
Hah, that's awesome.. good luck with it!
fnkngrvIn The Hotbox · Jan 28, 2013#3
pretty cool!
1.5Tampa · Jan 28, 2013#4
sweet, I want to make a custom shift knob too
harda toenailSE Missouri · Jan 28, 2013#5
HAHA If that's what you like then awesome man. Totally unique!
david_827boston, MA · Jan 28, 2013#6
Thats sick!
CTScottUSA, CT · Jan 28, 2013#7
That is very cool! Those Sapporo tap handles are mighty expensive ($100+).
fnkngrvIn The Hotbox · Jan 28, 2013#8
But are you gutsy enough to install an adult marital aid as your shifter? 🤣
bitz767Thread starterHarrisburg, PA · Jan 28, 2013#9
Originally Posted by CTScott ↑
That is very cool! Those Sapporo tap handles are mighty expensive ($100+).
Well, I went through 2 Kirin resin ones at ~70 each, then 2 wood ones ~$15 each, so I knew I needed a metal one.

I have this one and a back up that I snagged on ebay for about $80 each. So it's defiantly not cheap, but hopefully it will hold up. I have had a metal bud light one on there for about 2 months with no issues. It really came down to the material the attachment point to the shifter was made out of, so an all metal tap handle should hold up fine. The wooden ones just had a lag screw that went into the wood and wore out after a week or so. The resin Kirin tap handles snapped in half (while shifting) where the resin was glued together in pieces.
catliektheifLeesburg, VA · Jan 28, 2013#10
so sick!
tk-421Dagobah · Jan 28, 2013#11
Originally Posted by bitz767 ↑
If this one breaks, I am going to get a real katana and go that route. 👍
I'd really like to see that too... Not a huge fan of having logos all over the place.
A+ for originality, though! 🙌