Yarisworld Archive

fuel tank hatch cover

6 posts · 5,062 views

yaris9876Original postusa · Jan 5, 2013#1
I got under the seat and removed the cover to the fuel line that comes out of the tank.
I tried to remove the white plastic screw cover that gives you access to the fuel tank. It has a bunch of plastic ribs around it. There is some special tool that toyota techs use I guess.
Anyway I tried to bang it loose with a block of wood and hitting the ribs here and there.
It wouldnt budge. At all. Any ideas on how to get it off without a special tool that costs a ton..??

Replies 5

yaris9876Thread starterusa · Jan 12, 2013#3
I bought the tool for these lids for 25$. I got it and it still wouldnt budge. The tool just slips off the cover.
I dont fuckn believe this thing. Is it possible its reverse style threads??
CTScottUSA, CT · Jan 12, 2013#4
Originally Posted by yaris9876 ↑
I bought the tool for these lids for 25$. I got it and it still wouldnt budge. The tool just slips off the cover.
I dont fuckn believe this thing. Is it possible its reverse style threads??
No it is definitely normal - right tighty, lefty loosey. Did you buy the real Toyota tool or a generic one?
yaris9876Thread starterusa · Jan 14, 2013#5
generic I will have to beat the shit out of it with a wood dowel....what a waste of money..
CTScottUSA, CT · Jan 14, 2013#6
Originally Posted by yaris9876 ↑
generic I will have to beat the shit out of it with a wood dowel....what a waste of money..
The OEM one has notches in the fingers that slip over the ridges and must grip better. When I took one off for the first time I spent about an hour whacking it with a deadblow hammer and a piece of oak. Each whack rotated it about half a mm.