JabroOriginal postNew Orleans · Dec 20, 2012#1Pretty simple trade if such a thing exists. As the title says, Willing to trade liftback cluster w/tach w/ABS for cluster w/tach without/ABS. Needs to be interchangeable with an 08 Liftback. I prefer the trade to be MPH as well. My current cluster is a 2010 liftback cluster with a tach and ABS. It works perfectly, other than the traction control, ABS, and Brake light being constantly on because I don't have ABS or traction control. If I can negotiate a trade for one with the tach and without ABS and traction control that would be great, if not I'll be putting some electrical tape on those suckers. Thanks for looking.
Picture not included in this copy Tach edit by
abdt91, on Flickr
Replies 4
MadMaxSan Antonio, Texas! · Dec 21, 2012#2There's gotta be some way to disable those lights...
JabroThread starterNew Orleans · Dec 21, 2012#3 Originally Posted by
MadMax ↑ There's gotta be some way to disable those lights...
No way I know of short of taking apart the cluster and taking out the LEDS, which from other threads is a pretty easy fix. I do wish I could have the brake light work though, it's second nature to disengage the brake, but I do like the insurance of knowing for sure when its engaged and disengaged.
CTScottUSA, CT · Dec 21, 2012#4 Originally Posted by
Jabro ↑ No way I know of short of taking apart the cluster and taking out the LEDS, which from other threads is a pretty easy fix. I do wish I could have the brake light work though, it's second nature to disengage the brake, but I do like the insurance of knowing for sure when its engaged and disengaged.
It is strange that the brake light does not work properly. That indicator is driven by two sources: 1. The brake fluid level sensor and 2. by CAN bus message from the Body ECU, who actually gets the input from the switch on the ebrake lever. This same setup has been used since 2007, so the only thing I can see is that the CAN bus messaging changed for the ebrake status.
JabroThread starterNew Orleans · Dec 21, 2012#5 Originally Posted by
CTScott ↑ It is strange that the brake light does not work properly. That indicator is driven by two sources: 1. The brake fluid level sensor and 2. by CAN bus message from the Body ECU, who actually gets the input from the switch on the ebrake lever. This same setup has been used since 2007, so the only thing I can see is that the CAN bus messaging changed for the ebrake status.
Yeah, it is interesting, the light stays on regardless, but fortunately the car doesn't give a warning beep or anything with it engaged so its not much of an inconvenience other than me being paranoid and constantly checking it the first few minutes of driving, since I'm still used to it working in my old cluster.