Hi everyone I'm having a lot of difficulty getting hids to work. I've gone through several sets of h4 bulbs and have yet to have 1 ignite. This is extremely frustrating! Help! Thanks
Hid kit on 07 s sedan
9 posts · 3,297 views
Replies 8
try reversing positive and negative for the lo beams
This worked for meOriginally Posted by Betrivent ↑try reversing positive and negative for the lo beams
I went through a lot of trial and error, and a lot of asking CTScott what I was doing wrong - something to do with the lights are operated in reverse: so I guess there's a constant current to keep the lights off, and when you want the lights on the current shuts down.
Which would those be? I know there's three prongs...the sides? The middle?Originally Posted by Betrivent ↑try reversing positive and negative for the lo beams
You can flip the connector that going into the ballast ..., on my case, using the morimoto h4 harness, I switched the blue and the white wire from the 3 prong to work... We have the thing called " the ground switch"
I had a problem with mine too but I am a wiring noob and can't even tell you what was wrong lol. Since I got them working I have had no problems.
*update* tried this and got it to work. Thanks... Only problem is that my halogen highs don't work properly now..Originally Posted by Betrivent ↑try reversing positive and negative for the lo beams
Do you have aftermarket headlights with separate slots for halogens? If you are using stock housings, the low beam xenon bulb is the same that would be used for the high beam.Originally Posted by Philspecv ↑*update* tried this and got it to work. Thanks... Only problem is that my halogen highs don't work properly now..
The high beam lamp will not illuminate in the cluster because the current is different, but if you have bi-xenon headlights, they should still ignite. If you replaced it with a single bulb xenon kit, there are no highs to ignite and thus you no longer have high beams at all.
-C