Yarisworld Archive

Another Tanabe Medallion Exhaust Install

20 posts · 10,077 views

CharlieBravoOriginal postFlorida · Dec 7, 2012#1
OK. So I think this install has been covered many times. But, here is what I accomplished today and well, being a newbie, I just want to check with others who have more experience than me that I didn't mess anything up. The only concern I have with the install is the connection to the mid-pipe. The connection is holding, but it looks like it has too much gap between. Let me know please, if I need to fix anything!!!! Pics are: (1) Tanabe exhaust out of the box, (2) end of mid-pipe without install, (3) connection of tanabe and mid-pipe, (4) back shot of the new exhaust.

4 attachments not included in this copy

Replies 19

tooterLos Angeles · Dec 8, 2012#2
Looks perfect to me. 👍

The ball gasket keeps the plates slightly apart so they are free to absorb movement. Those Tanabe's look like pieces of jewelery.

Make a video of the sound... it's just like music. 🙂
DJYojimboChicago · Dec 8, 2012#3
looks sweet congrats!
auxmikeLI, New Yawk · Dec 8, 2012#4
Looks beautiful. I have that one and love it too. The fact the muffler can sits vertical keeps the inside noise down a lot. If you want a nice exhaust that's not gonna upset the wife, this is it. Buy from Garm, he won't screw you.
jpmck03USA · Dec 8, 2012#5
Nice. It does look like a piece of jewelery!
CharlieBravoThread starterFlorida · Dec 9, 2012#6
Thanks for the replies. It does look great and sound awesome!!
DJYojimboChicago · Dec 11, 2012#7
man i want this for my 2012 SE :)
ChwbccaSt Paul, MN · Jan 6, 2013#8
Originally Posted by auxmike ↑
Looks beautiful. I have that one and love it too. The fact the muffler can sits vertical keeps the inside noise down a lot. If you want a nice exhaust that's not gonna upset the wife, this is it. Buy from Garm, he won't screw you.
Who's Garm?
auxmikeLI, New Yawk · Jan 6, 2013#9
Garm runs micro image , a company that sells performance parts for the Yaris. He's on this forum all the time..
cali yarisCanoga Park, CA · Jan 7, 2013#10
^ Yep. I am. That would be me.

Hey OP, I don't *think* the exhaust uses a donut. Did it come with one? That gasket goes at the other end, where the header mates with the midpipe. I'm pretty sure the axle-back just bolts up directly.

@ tooter: not really any need for articulation at the rear joint. 🙂
tooterLos Angeles · Jan 7, 2013#11
Hey Garm, 🙂

If it wasn't meant to absorb motion it would have simply been two flat plates with no springs on the bolts like this...

Picture not included in this copy

They wouldn't add the extra expense of a spring tensioned ball joint if it didn't serve a purpose even if it was just to damp the transmission of vibration from one section to the next.
WeeYariGeorgetown, Ontario, Canada · Jan 7, 2013#12
Exhaust gaskets melt slightly when they encounter heat. The spring bolts are for drawing the two sections together as the gasket melts to create a tight seal.
Absolutely Red 12Your moms house. · Jan 31, 2013#13
Originally Posted by tooter ↑
Looks perfect to me. 👍

The ball gasket keeps the plates slightly apart so they are free to absorb movement. Those Tanabe's look like pieces of jewelery.

Make a video of the sound... it's just like music. 🙂
Did you have a gasket on yours?
I just pulled my muffler to install a Tanabe and it's a flare with no gasket.
FootPalm bay,Fl. · Jan 31, 2013#14
IS that the Touring muffler or the Concept G? The only reason I ask I am thinking about getting the Touring or the Megan racing muffler. The problem I have with the Megan racing though it looks huge under the car with the pics I seen. The Touring muffler appears smaller and is seen less. I am wondering if that is true. Thanks for the info.
P.S The Concept G looks huge with the pics I seen too. So I think that is the Touring, because it looks good...
Absolutely Red 12Your moms house. · Jan 31, 2013#15
The one pictured in the OP is a Touring.

I just installed one in mine.

You dont want a Concept, if its any louder than the Touring!!
tooterLos Angeles · Jan 31, 2013#16
Originally Posted by Foot ↑
IS that the Touring muffler or the Concept G? The only reason I ask I am thinking about getting the Touring or the Megan racing muffler. The problem I have with the Megan racing though it looks huge under the car with the pics I seen. The Touring muffler appears smaller and is seen less. I am wondering if that is true. Thanks for the info.
P.S The Concept G looks huge with the pics I seen too. So I think that is the Touring, because it looks good...
If you want to make a muffler disappear, just shoot it with some flat black high temp BBQ paint. I know its counterintuitive to cover up all that shiny polished stainless steel but if you don't want to see it... spray it.👍

Picture not included in this copy





Picture not included in this copy
DeathBeardLos Angeles, CA · Feb 10, 2013#17
Anyone using a vitz rs rear bumper with the medallion exhaust?
mazillaSan Jacinto California · Feb 10, 2013#18
Originally Posted by tooter ↑
If you want to make a muffler disappear, just shoot it with some flat black high temp BBQ paint. I know its counterintuitive to cover up all that shiny polished stainless steel but if you don't want to see it... spray it.👍

Picture not included in this copy





Picture not included in this copy

Thats what I did when I wanted to hide the cheapo turbo muffler I'm running. 😁

When the paint starts to fade I just lay down and blast it again....
DeathBeardLos Angeles, CA · Feb 18, 2013#19
Anyone know if this is compatible with the vitz RS bumper
Captain SlowScott, LA · Feb 18, 2013#20
hmm, mine was as simple as removing two bolts, pulling out the old exhaust, sliding in the new one and bolting it up. took ten minutes or less.