Yarisworld Archive

TRD exhaust

36 posts · 13,690 views

bambam28Original postPuerto Rico · Dec 4, 2012#1
Link to a thread or page that is not in the archive According to this thread guys it says that it will fit!! Now the only thing I need is the height and wide off the tip of the trd exhaust muffler to see if it fits the diffuser of my SE. Thanks in advance for the measurements!!

Replies 35

bambam28Thread starterPuerto Rico · Dec 5, 2012#2
Does anybody have a trd muffler that can measure the oval tip with a ruler please?
catliektheifLeesburg, VA · Dec 5, 2012#3
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
bambam28Thread starterPuerto Rico · Dec 5, 2012#4
This is mine so I can say its the same...you dont know how thankful I am for those pictures they where really helpful!!! CAN I ask you a favor!? Can you measure from the back of the muffler to the tip? Mine has roughly from 22 to 24 inches and it sits almost in the spring... And thanks again

1 attachment not included in this copy

bambam28Thread starterPuerto Rico · Dec 5, 2012#5
My pictures are too big for the forum can you recommebd a way so you guys can ser them!?
bambam28Thread starterPuerto Rico · Dec 5, 2012#6
If any of you guys are wondering, since there a re no TRD PARTS for my 2012 yaris SE 5 door I am trying to see if the 2011 trd exhaust will fit
catliektheifLeesburg, VA · Dec 5, 2012#7
to resize your pics you could upload them through tinypic. com and they have a drop down option to resize your picture to a forum size. as for the measurements ill try to get it for you tomorrow.
bambam28Thread starterPuerto Rico · Dec 5, 2012#8
Thanx I aprecciate it!!
catliektheifLeesburg, VA · Dec 5, 2012#11
this is what i meant

Picture not included in this copy

then when it uploads copy and paste this

Picture not included in this copy

atleast thats how i do it
bambam28Thread starterPuerto Rico · Dec 6, 2012#12
Ok I will do it again :) thanx
bambam28Thread starterPuerto Rico · Dec 6, 2012#13
Picture not included in this copy
bambam28Thread starterPuerto Rico · Dec 6, 2012#14
Picture not included in this copy
bambam28Thread starterPuerto Rico · Dec 6, 2012#15
Thank you very much :D
bambam28Thread starterPuerto Rico · Dec 6, 2012#16
catliektheif any luck with the measurements? I think I am gonna take my chances and order it...my fear is that the muffler and tip dont fit in the back of the axle... any suggestions guys?
catliektheifLeesburg, VA · Dec 6, 2012#17
sorry i had to work all day.. but i think (im not positive) but the biggest problem you might run in to is if the 2012 doesnt have the same hanger points . again im not sure.
catliektheifLeesburg, VA · Dec 6, 2012#18
okay so i ran out and measured real quick.. it was roughly 19 inches from the back to the tip.. it was freezing and dark out so it was a quick measurement lol hope it helps


so if the tip is 7 inches long, the muffler would be a foot long
bambam28Thread starterPuerto Rico · Dec 7, 2012#19
I really aprecciate what you have done!! Im sorry you got a little cold :( im gonna order it and let you guys know how it went :D and again thank you
bambam28Thread starterPuerto Rico · Dec 7, 2012#20
Ok, I ordered the exhaust, arrives on monday so I will let you guys know how it went ;)
catliektheifLeesburg, VA · Dec 8, 2012#21
no problem man, i hope you get to enjoy it! i just got mine recently from jerkratt, and just turning on the car made me jaw drop. its such a difference. i love it
bambam28Thread starterPuerto Rico · Dec 10, 2012#22
Hey guys I got my Exhaust today, disappointment, didn't fit, but I'll post some pics about it, tomorrow im going to a muffler shop so they can adapt it...here are the pics so yo can compare oem 2012 yaris SE and 2011 yaris liftback TRD exhaust. Also I took a pic when I installed it without any modifications... Ill get some more pics tomorrow!!!
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
bambam28Thread starterPuerto Rico · Dec 10, 2012#23
Tomorrow I will let you know :D
bambam28Thread starterPuerto Rico · Dec 11, 2012#25
Se oye bn...q resonador es ese?
mario98cPuerto Rico · Dec 11, 2012#26
Magnaflow glasspack. Tambien tiene eliminado el segundo catalitico. Yo tenia el carro sin resonador pero sonaba bastante duro y restrillaba un poco cosa que no me gustaba y pues le puse el resonador. Btw nunca me han dado un ticket.
Picture not included in this copy
bambam28Thread starterPuerto Rico · Dec 11, 2012#27
As soon as tinypic lets me resize the photos I will post them, but my honest opinion is dont do it...don't buy the 2011 TRD EXHAUST does not fit!! And is a pain in the ass!!
bambam28Thread starterPuerto Rico · Dec 11, 2012#28
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

If you cut all the hooks and make new ones like I did and connect the exhaust in the oem pipe ( no soldering or anything just bolted into the factory pipe) the exhaust is going to sit a little hidden like mine...maybe later I will fix that for now mine is gonna stay like that sounds AWESOME, and if you are willing to pay and customise the hooks...then I recommend it!! Again it sounds AWESOME!!!
bambam28Thread starterPuerto Rico · Dec 11, 2012#29
Im sorry some pictures are inverted, I am not on my computer and the functions are limited :S
DJYojimboChicago · Dec 11, 2012#30
this is the issue i'm worried that the tanabe medalion exhaust won't fit too. Ur exhaust looks decent. How does it sound?
DJYojimboChicago · Dec 11, 2012#32
🙇🙇🙌 Dang looks like our stock SE exhaust but sounds amazing! Congrats man!
bambam28Thread starterPuerto Rico · Dec 11, 2012#33
🤘🍻 THANKS...Ill post more pics and videos soon :)
imike929San Diego · Dec 15, 2012#34
Please do bambam!
tooterLos Angeles · Dec 15, 2012#35
Originally Posted by bambam28 ↑

Picture not included in this copy


If you cut all the hooks and make new ones like I did and connect the exhaust in the oem pipe ( no soldering or anything just bolted into the factory pipe) the exhaust is going to sit a little hidden like mine...maybe later I will fix that for now mine is gonna stay like that sounds AWESOME, and if you are willing to pay and customise the hooks...then I recommend it!! Again it sounds AWESOME!!!
That's an absolutely beautiful job of adapting the exhaust! 👍

I really like it tucked in like that. 🙂
YarizzleVa Beach · Dec 22, 2012#36
Nice! Thanks for the info and pics!